Reviews
First SMARTDisplay
[How is it used?
Used for city driving and touring.
I use it with Apple CarPlay.
Was the one you received as per Image?
In fact, when you hold it in your hand, it is surprisingly small.
The screen size is 5-inches, which is almost the same size as X-ADV's Meter.
Was the installation difficult?
It was easy to install as it can be powered from a USB port.
Wiring from Battery is also possible.
How was your experience with it?
I am still using it only for city driving, so I wonder if it is convenient? I am not sure if it is useful or not.
Is the Navigation screen easier to see?
[Included Parts:were they on?
The Mount in Included Parts:was easy to install.
A simple instruction manual is included.
Download the PDFFile from Kijima's website for connection and use.
[Was there anything that disappointed you?
We are not yet in full operation. "Honestly, is this how it's going to be?" That's my impression.
It may be due to my usage environment, but sometimes the music gets cut off or I can't hear it.
The connection method is called Smartphone&arrarr;SMARTDisplay&arr;Income, but I can't grasp where the cause is.
I'm using IncomeB+COM SB6X, but I'm not experiencing any interruption in SMARTDisplay and Pairing, so I'm going to wait and see how it goes a bit more.
【Review】
I chose Kijima's Display considering AfterCare and FOR JAPAN MODEL certification because it is sold by JapanManufacturer, although products with the same spec. are sold at a lower price.
Price-wise, the same type of product without KijimaLogo would be considerably cheaper.
It does not have air pressure management or DreEveRecorder like other companies' products, but it may be worth buying if the display alone is sufficient for your needs.
I'm worried about my phone running out of heat in the coming season, so I'm looking forward to seeing how long I can use it.
View detail
Bag Support
Used as support for DEGNER's Waterproof Bag during touring View detail
Fits: HONDA Ape 50, HONDA Ape 100, HONDA Ape 50, HONDA Ape 100
The APE can be found at ・・・・
I purchased this carburetor and installed it in order to prevent dust from being sucked into the carburetor while driving on the street, but the intake resistance was much greater than I had imagined. In addition, the carburetor protrudes to the Right on the APE, so the Rubber that stops the Net when the carburetor hits the thigh while driving is not able to be used.
Gap and before I knew it, Net and Sponge were gone. Now I am using Funnel with JAM's 3D Air Filter (Right Side Cover needs to be removed or partially cut).
View detail
Mounting and Wiring are
[How is it used?
Camera faces the front properly.
Was the one you received as per Image?
As pictured
Was the installation difficult?
Since you cannot access the Mirror Nut without removing the Meter panel, you will have to do a lot of killing, but you can do it if you follow the Installation Instruction Manual.
How was your experience with it?
No problem
[Included Parts:were they on?
Bolt for fixing Camera is included but not Nut
It was used for mounting Camera of AIO-5, but the hole of Camera was too small to be used.
[Was there anything that disappointed you?
Wiring Cord bare
Installation Point or hang
Meter panel is ScrewQuantity:I was able to remove 2pcs and pull out the rest by force and work without removing MeterWiring.
View detail
Bolt hole
Since the Bolt hole position was different by about 5mm and could not be installed, it was installed by making a long hole with File. Forced installation may damage the screw holes. View detail
Fits: KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Ninja 1000SX
Installation is fine, but ….
The Handlebar Mount Bracket was installed without any problems.
However, because my body is not large enough, the Handlebar was squeezed inward, making it impossible to mount.
I would suggest you to match the body to the car body and then choose other PARTS.
View detail
Fits: HARLEY-DAVIDSON XL1200, HARLEY-DAVIDSON XL883
Am I putting it on the wrong way?
Installed on an XL883N (2019). The Bolt on the back side of the bike is threaded on the Fender side, so it is easy to loosen and install, but on the front side, it is nutted. Therefore, it is not possible to remove the Bolt by simply loosening the Bolt and sliding it off. In addition, it is not possible to leave a space of about 5mm between the attached cylinder-like part and the loosened Bolt (Bolt is not long enough?). (Bolt is not long enough). The longer cylindrical part is not used and is fixed in place.
I don't know if it is a problem with my installation/motorcycle or the product.
View detail
Fits: KAWASAKI Ninja 250, KAWASAKI Ninja 400 (2014-)
The product was exactly as shown in the picture and there were no problems.
I installed it on my ninja250. It was easy to install and I am using it without any problems.
I installed the Smartphone Holder that I originally had. I am touring comfortably.
View detail
They're disposable, but expensive!
I bought it as a spare because I didn't want to have to worry about the REMOTE CONTROLLER attached to the Body alone in case it malfunctions.
The addition itself can be easily completed by following the Instruction Manual for handling.
This for RepairREMOTE CONTROLLER, or rather, this REMOTE CONTROLLER is basically disposable since the batteries cannot be replaced. Considering it is disposable, it is a little expensive.
View detail
Fits: HONDA Rebel500, HONDA Rebel250, HONDA Rebel300
There are personal improvements
It will be installed on REBEL. Installation is easy, but I wanted Bolt color to be Black color. View detail
Note the size
Tail lamp was in the way and could not be attached. Please consider carefully before you buy. 1.5cm height plus Camera is needed on the Number. View detail
Better visibility, but also vibration...
The phone is positioned at the top of the Screen, making it easier to see.
However, it is harder to see than when I had the Smartphone Holder on the Handlebar before because it shakes with vibrations while driving.
The screen is fixed by a rubber bush, so I guess it can't be helped, but it might have been a little bit of a mistake...
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS CAFE
To install Tool Bag
I purchased this to install a small side bag or tool bag. I purchased this bar because the existing Pillion Bar was also made by KIJIMA. The color, texture, and pipe diameter are the same, so there is no discrepancy. I didn't really want to install it, but I didn't feel comfortable using only standard tools. View detail
Not bad
Do you have enough Screw Mounts when used with Helmet holder?
I'm worried about that, but I'll run it anyway and if it doesn't work, I'll remove it.
View detail
How about a custom key?
[How is it used?
After duplicating the OEM key, I did not like the key design, so I bought it on the premise of modification.
I am now using it as my main key.
Was the one you received as per Image?
As per Image
Was the installation difficult?
Attaching the key to the key holder is easy, but cutting the key before attaching it to the key holder takes time.
If you use a Gold saw, it will take quite a while.
I think using an electric Leutor or similar tool will make cutting easier.
How was your experience with it?
It has a moderate presence and a high sense of custom.
The key holder part can be removed to prevent scratches without making a mess around the key sinter.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
Not particularly
[Others]
Since the key is supposed to be processed, it is recommended to make a duplicate key and attach it to it instead of using a subkey.
When inserting the key into the Key Holder section, it is recommended to use adhesives as well as screws to secure the key.
If you drop it, the key holder part will be damaged, so it is better not to drop it.
View detail
Buy for Repair
I lost the tip of my Ladder, so I bought this as a for Repair.
The texture is normal Material:The Ladder itself is not made by KIJIMA, but it is very sturdy.
As for the point that processing is necessary, I cut about 3cm for the length adjustment.
Because it is slightly oversized, I tie the root with Tie Wrap now to prevent it from falling off and use it.
I'm generally satisfied!
View detail
Things are good, but expensive.
If you have a Hexagonal Wrench, even a beginner can install it.
It's an Exclusive Design, so it's easy to use, but it's expensive.
Also, the included Bolt rusted quickly.
The Multi Bar of De*tona is Matte tone, but this one is glossy.
View detail
Fits: HONDA CBR400R, HONDA CBR650R, HONDA CBR500R, HONDA CBR500R
Exclusive Bracket
I bought this product because it is made by Mistuba and KIJIMA, but it does not fit the DAYTONA M760D. It is easy to install. It's not compatible with DAYTONA. The camera is not attached to the body with double-sided tape, so I think the camera is refreshing. I think the price is too high, and the instruction is too simple. I think you can do it with a commercially available bracket, but DAYTONA! If you release the Drarecorder, please release the Exclusive Bracket for the car body! I'm sure it will fit Mistuba and KIJIMA. View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
Fewer interference reports even when installing external screens.
The mount type parts that can be installed on BirdCity are
1.Type with Mount bar near the Handle using Mirror mounting hole.
2.Type with Mount bar on the top side of Meter using Screen mounting part.
There are two types, both with their own advantages and disadvantages
For Type 1, the Bracket is placed in the Mirror mounting area and the Mount bar is attached to it.
The advantage is the high degree of freedom of the mounting position of Option and easy to avoid the contact of Screenetc.
If you plan to install a drink holder, definitely this one!
Type 2 uses the Screen mounting area and attaches the Mount bar from there to the Meter.
The advantage is that the Mount bar is positioned above the Meter, so the mounted object naturally comes into view.
On the other hand, if the object to be mounted is a large size, the meter relation (Including Indicator) Visibility of the
In addition, since it is made on the premise of NORMAL, there is a possibility of interfering with Long Screen and external Screen.
Fortunately, the Mount of this KIJIMA is purchased because there seems to be almost no interference report.
Long Screen of WorldWalk can be installed without a problem.
View detail
Fits: KAWASAKI Z250, KAWASAKI Z400, KAWASAKI Ninja250, KAWASAKI Ninja400
Processing required
It does not fit the 2014NINJA. Sorry, but I'm in the process of returning it. View detail