Reviews
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Easy to install and does not affect Handlebar
Since it is a SUPER BOLDOR, we did not want to attach various things to the Handlebar, so we chose the Type Multi Bar to be attached to the Cowl.
Installation on 2BL-NC42, but can be installed with Exactly.
When I first saw it, I was worried that the holes would not engage, but after stopping and adjusting the One Side, I was able to find a Point that just fit, and it is securely attached.
I thought that the installation might produce Chatter, but the impression is that it actually increases rigidity.
Currently I have a Smartphone Holder (with charging function) and a 3Inch DriveRecorder.
This is the full width, but there is room for a bar, so those who shoot video, etc. could attach a Camera Pole or other device here. However, it may be difficult to extend the Pole directly above the standard Screen due to the angle.
I have changed to Zero Gravity's Sports Touring Screen so I have a little more room.
By having the Smartphone just at the same position as the Mirror, there will be less eye movement, which will allow for safer driving. Also, since the Handlebar area is not heavy, the Merit is that it does not affect the light Handlebar operation that is a feature of SUPER BOLDOR.
My one complaint is that the Screw is a little hard to close, I wish it was HX4 or 5 instead of HX3.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I was a little confused whether to mount the Handlebar Mount Bracket on the Handlebar side or on the top of the Meter, but I chose the type that I could see while riding. I used it twice on a touring trip and it was very easy to use. I don't mind even if it rains a little. View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA BirdCity 155, YAMAHA Tricity155
KIJIMA Handlebar Mount Bracket
I think it is better than Handlebar because you can mount the phone on top of the Meter so it is within view and you can drive without having to be careful. View detail
Note the size
Tail lamp was in the way and could not be attached. Please consider carefully before you buy. 1.5cm height plus Camera is needed on the Number. View detail
![[Repair Parts] Grip Heater GH07 / 08 / 10 Grip End](https://img.webike-cdn.net/catalogue/webike_images/0000/0000/0312/24737348_20220922155343864_TS.jpg)
Repair Parts was purchased
Well, it is just Repair Parts, so there is no evaluation.
But I really appreciate that the products arrive quickly.
I would use them again in the future.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110
I'd like to wear the Bag I've always wanted to wear.
I bought this one because I have a Side bag I want to put on.
Referred by the Bag sales company.
Motorcycle is a CROSSCUB110 ja45.
I didn't think anything of the price because I don't know what the market is for Bag Support, and I don't have a Bag, so I don't know how to use it yet.
Not sure if I missed it, but Allen Wrench is required.
I borrowed it from an acquaintance and tried it. The OEMBolt is hard… If I was persistent, I was able to get it off properly without crushing the Screw Mount. The only place where I thought it might be difficult for women is here.
The dimensions were right and it healed quickly and easily.
It is still fun to put parts on a motorcycle.
View detail
Fits: HARLEY-DAVIDSON Universal
Mounted on EVO FLSTF FATBOY
It is now very easy to attach and remove the Saddle bag.
It looks comfortable and I am satisfied with the Large change.
I should have put it on sooner.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 SUPER BOL D'OR
Not suitable for CB400SB!
I am on NC42Second Type Model (2BL-NC42).
Although there were scattered reviews that said it could not be installed, I bought it because I believed it was compatible with the product.
As a result, it was no good.
Even if you can get to a temporary fixation on one Screw, you can't reach Limit in place on the other side.
The Level is not possible to install unless the Cowl side is bent by force (probably to the point of breaking) or the Bracket side is bent or shaved.
During the trial and error process, the other Screw and Washer were dropped deep inside the body Frame and became missing, so we gave up on the installation.
Since the work was done the day after the new car was purchased, defects such as distortion on the body side are unlikely.
Some reviews say that it could not be installed even on the early NC42 (EBL-NC42), and I think it is not compatible with CB400SB in general.
It says that it is compatible with both KIJIMA and Webike, but was the CB1300 used as the basis for determining compatibility?
I would like to see it properly verified.
View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZX-14R
It's exclusive to the car model and EXACTLY!
I purchased this for the installation of a Smartphone Holder and USB power supply.
Compatible with ZZr1400, ZX-14, and ZX-14R, with a common bar thickness of 22φ.
In my case, I already had a HandlebarUPSpacer installed.
I thought the supplied Bolt was not long enough, so I prepared it separately.
Impressions were that it was a good size and looked nice and refreshing.
However, the instruction manual was for a Honda Africa Twin, which may have been a mistake.
I didn't have any problems with it because it never fails to install.
View detail
Great for packing up Touring!
When I was packing for a touring trip, I needed a place to hook a rope for hanging cargo, and I found this Loading Rack Nut! (Exactly as the name says!)
The texture is Psycho! Even though it replaced the OEM nut, it blends in well and looks great with the Motorcycle style!
It's as if it was there all along!
And it's so easy to use!
I am so glad I put it on, it gave me a sense of satisfaction!
You can easily enjoy something with PetitCustom!
This is about as good as it gets for diyCustom's rudiments.
It's nice to be able to enjoy it casually.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB 50, HONDA SUPER CUB110
Entrapment prevention
The product itself is neither good nor bad.
I bought the side bag because of its low price compared to other products.
It is a good product for those who install it.
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB 50
Size is good!
[How is it used?
It is installed on a JA60CROSS CUB.
Was the one you received as per Image?
The color is semi-gloss to matte black, slightly different in texture from OEM Carrier's glossy black, but it did not bother me. (And it is not a noticeable part.)
Even without the side bag, it is good and not too noticeable.
Was the installation difficult?
It is easy. As long as you have basic tools, you are good to go.
How was your experience with it?
I put a Tanax Mini Shell Case (MFK-234) on it and Balance is good.
I was impressed by the shape of the Side bag as it is easy to install.
[Included Parts:were they on?
No problem.
[Was there anything that disappointed you?
Not particularly
View detail
Mounting photo
The silver part is Spacer purchased at Home center, and Bolt is using Included Parts:. View detail
It can be installed as it is.
The Instruction Manual states that it cannot be used as a Single Item; it is recommended that it be installed at the same time as the Bag Support.
I don't wear a bag large enough to use the Bag Support, so I use a single item. If I install the bag as it is, the space for the belt is too narrow. So, I bought a M8 Bolt Spacer at Home center to make a gap. This is not the recommended way to use it, so it is your own responsibility, but it works fine.
This time I installed only Left Side, but I want to install Large type SeatBack, so I will buy Right Side as well.
View detail
Fits: KAWASAKI Ninja ZX-6R ABS, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R ABS KRT Edition, KAWASAKI Ninja ZX-6R KRT Edition, KAWASAKI ZX-6R
I didn't use the key side.
Purchased to mount SP CONNECTO's Smartphone Holder.
The key side is not used because the operability of frequently used keys deteriorates significantly.
The paint on the Black is also weak and has partially peeled off due to slippage.
I would like to replace it if there is another option.
View detail
Better visibility, but also vibration...
The phone is positioned at the top of the Screen, making it easier to see.
However, it is harder to see than when I had the Smartphone Holder on the Handlebar before because it shakes with vibrations while driving.
The screen is fixed by a rubber bush, so I guess it can't be helped, but it might have been a little bit of a mistake...
View detail
Needed for Side bag
I installed Left Only, Right Only Exhaust System, so I don't feel any discomfort. View detail
Easy install
Ordered the part in the US and it arrived on time. The support itself is fairly sturdy and was quiet easy to install, takes around 30mins for install. View detail
Height 90cm [age 4 I have been using it since about
carry a child on their back like a backpack but of the type...
The child is seated and does not feel the weight.
Quantity of Large person's waist:Pair (for Left and Right) around
It comes with a soft grip stick for children to hold onto.
Your feet on the tandem step and your hands on the I guess you hold the tandem belt to stabilize yourself!
I do fall asleep on my back sometimes.
The child's upper body is secured by a belt.
He's deflated and leaning on his back.
To be honest, it takes a lot of care to drive, but I feel safe.
With PCX, I was using it to drop off and pick up my kids from daycare.
If you tandem with your child, by all means!
View detail
Standard
The Mount Bracket is a part that could have been included in the OEM.
KIJIMA and DAYTONA are the only two choices available.
The advantage of KIJIMA is that you don't have to worry about loosening because it is welded.
We also chose this one because it seems to have a wider effective mounting range and greater flexibility.
The Bracket itself is heavy and feels quite prone to vibration.
The OEM CRF250Rally had the same vibration.
As with other KIJIMA products, paint and other materials tend to crack (or rust) when tightened with a weak feeling, so this is a point of caution.
KIJIMA is good because it produces products that can scratch this kind of itch well.
View detail