Reviews
A little long to use for ESTRELLA.
[How is it used?
The 2002 ESTRELLA did not originally have Fork Boots, but when the front fork was overhauled, they were installed to prevent dirt and to give it a retro look.
Was the one you received as per Image?
The shape of the product was identical to the one in the picture on the Site.
Was the installation difficult?
I originally purchased the ESTRELLA after gathering information on the Net to see if it could be used with ESTRELLA, so the diameter of the Fork Boots was not a problem. I had removed the front fork so I could install the Fork Boots from the top without cutting the Fork Boots.
The diameter of the Fork Boots and Front fork was too Exactly to move, and it was Large strange to lower them to the proper position.
If you cannot detach the front fork, you will need to cut the Fork Boots yourself and install them by inserting them between the front fork and the front fork.
Also, since there are no holes in the Fork Boots to allow air to enter or exit, if the Fork Boots are installed as is and the Fork is stroked, there will not be enough air in the Fork Boots and the shape of the Bellows will collapse. Once the installation position is determined, we recommend making a hole in an inconspicuous place to allow air to flow in and out of the bellows.
How was your experience with it?
The Fork diameter was Exactly compared to ESTRELLA, but the length of the Fork Boots was a little long and the Bellows were a little close to the bottom.
Material-wise, it seems to be resistant to rain and wind, so I expect the rest to be durable.
[Included Parts:were they on?
In addition to the Fork Boots, a Tie Wrap was included to secure the upper and lower positions.
View detail
Fits: SUZUKI KATANA, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S1000, SUZUKI GSX-S1000F
Installation Large change
You need some equipment for removal, Bolt nut is hard, and some equipment for installation, Torque wrench for tightening, and retightening after 100km driving (it loosens a lot). View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
It's a bit big
In terms of price, I personally think it’s a bit expensive, and I can’t find the same product. In the end, I can only choose it. The actual product is a bit bigger than I thought. I hope the effect will be better after installation. View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON DYNA Family
goods in progress
Even with the use of glue, it still started to crack with Packli
I thought about abandoning it, but at the last moment, I had to wage the valley! Healed
The use of Tie Wraps is not recommended because the width and thickness of the tie wraps inhibit the shrinkage and breathability of the Boots I used it and it seems to be very well salted
Packed disease is caused by a lack of design, precision and strength in the product's biting area, as well as excessive product strength and hardness I think it's because of the material and bonding method and airtightness of
Particularly on vehicles with a softer suspension setup, only using water for the manufacturer's recommended installation method I think it's a frequent occurrence
It's not a compatible car model, but many people seem to be diverting it, and the Size is just about perfect It's a shame
View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON DYNA Family
It's better to glue them together securely
The structure is similar to the Drasha Split Boots for cars
The above-mentioned items are used with strong adhesion, but they are surprisingly durable enough to be used by people in the mechanics' business I bought it
Is the ride hard? The first time I installed it according to the manufacturer's instructions, using water, but then I had to repack it several times It comes cracking, so I finally attached them together with synthetic rubber adhesive
From the looks of it, it looks like it's better to use glue, but if that doesn't work, you should consider using glue as well as Drusilla I am
I used it on ESTRELLA, but it seems to be a good way to fix Boots in place with a little bit of shrinkage after complete adhesion It is
It is not bad, although it is a little bit thickly built and has a thicker flesh that seems to have high durability and is a volume up image I think
But after installation maintenanceetc., remove the Fork and use the normal I think it's a no brainer to use OEMBootsetc
View detail
Fits: HARLEY-DAVIDSON SPORTSTER Family, HARLEY-DAVIDSON DYNA Family, HARLEY-DAVIDSON DYNA Family
Installation was easy
When installing at a cheap price for the price, Spec. Tie Wrap is outstanding and honestly disappointing
It's a Recommendation for those who want to easily install Boots as they are easy to install
View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200
Exterior Imechen
SV650ABS installed in 2016 year. Because it was troublesome to remove Tire and Fork, cut the connection line with Scissors and stuck with a momentary adhesive to bond Rubber and Plastic. Although it is also described in Homepage, the Inner Tube is Φ 41 and the product is Φ 39. I fixed it with a tendency for Rubber nature, but the bellows part was cleanly attached but the upper part made a slight gap. It is not problematic because it is tightened with attached Tying Band.
It looks satisfying. Fit feeling is also sufficient, and the expansion and contraction of bellows is also Smooth. Since the color tone is slightly weak, it was better not to be personally personally.
It may have become a bit Classic !?
View detail
To VOLTY
I used it to give Retro feeling with VOLTY. Although the product itself is beautiful making, I think that the fixing method is somewhat regrettable as Tie Wrap closure. Also, there is no place for air to escape during Stroke, so you need to drill a hole yourself. View detail
Can you spare a moment with Inner?
Dust Seal of Ska TW 200 E was torn, so I exchanged this item.
Was OEM a bellows?
It makes it look clear by doing Dust Seal!
This is better for Street Specification.
However, there is a slight gap between Dust Seal and Inner pipe, whether it is Large or not.
I do not know if I do not see it well, can we prevent Dust? It is a bit of a doubt.
Since the gap may be a difference due to individual differences or age, we think that the goods themselves are cheap and good.
View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
Off Make it like a car!
I need to manage Fender without doing it. Down fender, or if you do not process Fender at NORMAL position you can only add it in a distorted form. Material seems not to be bad so I think that it is good for Fork protection. View detail
Fits: HONDA BENRY CD50, HONDA solo, HONDA Benly CD90, HONDA BENRY CD50, HONDA solo, HONDA Benly CD90
Although an authentic positive one is the metal of a Plating, I would like to carry out it in the style of the old vehicle. If it does not open by itself since there is no hole of air extraction in the Boots, a Boots will change by movement toward a
Although an authentic positive one is the metal of a Plating, I would like to carry out it in the style of the old vehicle.
If it does not open by itself since there is no hole of air extraction in the
Boots, a Boots will change by movement toward a Fork.
The hole is opening the pure Boots of
Off vehicle.
It will solve, if an about 3-mm hole is made one.
The position to open is reference about the authentic positive one of an Off vehicle.
View detail
Fits: HONDA APE 100, HONDA XR100MOTARD, HONDA XR50 MOTARD, HONDA APE 50
[Webike Monitor] He wanted to finish the APE in the style of an Old trucker, and it was purchased. Although appearance is very satisfactory, it is regrettable that whose path by the side of an Outer tube was somewhat large. It is very effective
[Webike Monitor] He wanted to finish the
APE in the style of an Old trucker, and it was purchased.
Although
appearance is very satisfactory, it is regrettable that whose path by the side of an Outer tube was somewhat large.
It is very effective for that of
Off 車ぽく仕上げる.
View detail
A little crevices are between a thing with bad accuracy, or an Inner Tube by a thing with the bad quality of a Rubber, and hard touch. Is it reasonably priced?
A little crevices are between a thing with bad accuracy, or an Inner Tube by a thing with the bad quality of a Rubber, and hard touch. Is it reasonably priced? View detail
Fits: HONDA BENRY CD50, HONDA solo, HONDA Benly CD90, HONDA BENRY CD50, HONDA solo, HONDA Benly CD90
In particular, the function is excellent or it purchased that Faulk of CD did not rust not related. It is the touch to which, as for a few, appearance became good from unreserved Faulk. It is merely kana so much (+_+) ...
In particular, the function is excellent or it purchased that Faulk of CD did not rust not related.
It is the touch to which, as for a few, appearance became good from unreserved Faulk.
It is merely kana so much (+_+) ...
View detail