Reviews
Reliable Filter
I bought it two years ago and this is the second time. It was not badly stained,
Replaced to prevent carburetor clogging.
It has magnets on it so it will remove rust, etc.
View detail
I put it on as a spare.
External Fuel filter attached to ESTRELLA.
It has been immobile for a while, and you can often find a little bit of age-related deterioration in various parts of the car. 。
There does not appear to be any fuel seepage, especially in the Fuel Cock area, but there is no denying that the Fuel Cock has deteriorated over time.
The other day, I was worried about the rust in the fuel tank, and although I have removed rust to prevent impurities from entering Gasoline, I am not sure about it, so I will install an additional external type of fuel filter.
Fuel filter
A filter device used in automobiles to filter fine impurities contained in fuel.
It is used for the purpose of removing water, sand, and dust mixed in during refueling, etc., and maintaining sufficient fuel efficiency.
There seems to be a time for replacement, though not up to the air filter.
■ 50,000 km at Carburetor Vehicles
■Injection car with 100,000 km
■Diesel car with 50,000 km
is the standard.
Continued use of the filter past its replacement time will not only clog the fuel filter element and cause a lack of engine output, but will also cause the filter to lose its original function of capturing foreign matter and separating moisture.
[When the fuel filter clogs.
‥
Idling of ▲Engine is unstable.
Engine seems to stop when driving.
▲ Suddenly, Engine stopped spewing.
Failure to start = Engine will not start.
I haven't experienced the clogging of the Filter yet, but considering the distance and age, it should be replaced. 。
In my 90's ESTRELLA, the fuel filter is integrated with the fuel cock and inserted into the tank. That is not so bad, but I wanted to be sure.
I also added an external Type as a spare.
I chose KIJIMA's because it was inexpensive and I had used it before.
The deciding factor was the transparency, which makes it easy to see dirt.
Replacement procedure.
(1) Fuel Cock is turned off
↓
(2) To be sure, Gasoline in the carburetor should also be removed.
↓
(3) Interrupt the fuel filter between the rubber hose connecting the fuel cock and the carburetor.
It is wise to prepare Oil Resistant Hose separately because OEM Hose is not long enough.
↓
(4) Turn on Cook and apply Engine.
Operation check.
Fuel Cock flows by Engine pressure.
after replacement
No problems
They seem to be getting rid of the impurities for sure.
Durability...? I think Large is durable because it is inexpensive and will be replaced with a con stunt.
It is a good idea to have insurance on older Motorcycles.
Installation is also easy.
View detail
Rubber hose is consumable!
[How is it used?
Used for SUZUKI/CHOINORI Fuel Hose and Negative Pressure Hose.
I purchased this product to replace the hose that had been attached to my car because it had deteriorated over time.
How was your experience with it?
It is brand new Rubber so it is very soft.
Does this make it easier to get the fuel down? I think it has become easier.
How did it compare to other products?
We selected KIJIMA because it was the one with the lowest gold price, although other manufacturers also offer similar products.
I am glad to hear that it is working fine.
[Points to note]
You will be handling Gasoline, so be careful not to ignite it.
View detail
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
Used to supply Gasoline as a startup check
Installed between the connection from a simple Gasoline container to Carburetor to prevent CarburetorOverflow.
Effective without CarburetorOverflow after adding Filter.
View detail
Durable!
Colorful and good looking Fuel hose. In the product description section Vulnerable to ultraviolet rays." It was stated that the Is it less durable?" I was convinced that it was a good idea to buy it, but I don't see much difference in durability between it and the OEM fuel hose. I am recommending this product because it looks very different and cool! View detail
For those who feel more comfortable seeing what's inside.
[How is it used?
I purchased this product to refresh the hose around the fuel cock and carburetor of a vehicle I have owned for many years, as they have begun to harden over time, while keeping costs down.
Thanks to the fact that the same parts were used in vehicles up until recently, OEM parts are available for hoses, but they are a bit expensive, and the price is a bit high. CostCut" "Where commercial products can be used, CostCut uses commercial products." So I checked Webike and found that KIJIMA's Hose was cheaper this time, so I bought it.
Was the one you received as per Image?
The familiar Clear pink Fuel Hose, a supple and flexible Fuel hose, which is natural since it is brand new.
Incidentally, the OEM fuel hose we had been using up until now had no cracks, but it had deteriorated over time and was in a bad shape, making us glad we replaced it.
How was your experience with it?
We replaced the above-mentioned CaChicatiHose with this flexible product and everything is better.
The part used is a Carburetor drain hose, and the new one is good.
[Points to note]
Several different sizes of HoseLineup are available in the same package, so be sure to check the inside diameter of the hose you want to replace and order the size that fits.
How did it compare to other products?
I have only used KITACO and KIJIMA products, but I think they are both similar products and there is no problem no matter which one you buy.
I feel that the pink clear type fuel hose hardens a little faster than the black rubber hose, etc. If you do not neglect daily maintenance, there is no problem, but for a lazy person like me, it is better to check it once a year or so. I felt it would be better for a lazy person like me to check it once a year.
Other items that would be helpful
Point and hang of installation
I am not sure if I am doing it the right way, but if I apply a small amount of silicon grease during installation and insert it into the cook, it works Smoothly.
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
The most Large-picture work may be to insert it firmly and prevent it from coming loose with a firm hose band.
[ITEMS TO BUY TOGETHER
The inside diameter of the hose from the fuel cock and the hose around the carburetor may be different, so be sure to check the inside diameter of the hose that was originally installed before purchasing the appropriate product.
If the Fuel Hose is replaced with a new one, it may be better to purchase a new Hose clip (Hose Band) as well, considering its deterioration over time.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is necessary to replace the fuel hose on older motorcycles.
View detail
Very convenient!
I purchased the Tank when reviving it after more than 10 years of neglect, as I had many opportunities to take it off and on.
In conclusion, when you detach and detach the hose of Gasoline, there is no dribble of Gasoline and no damage to the hose.
It is very convenient to remove Joint with one hand.
Motorcycles, which rarely have the opportunity to remove and install the tank, may also have hardened fuel hoses,
I am considering installing it on my other Motorcycle as it seems cost effective.
View detail
To Refresh around Fuel Cock
[How is it used?
I purchased this product to refresh the Fuel Cock area of my 27 year old SEROW225 WE.
Thankfully, Yamaha still sells the 1997 SEROW225 WE Fuel CockAssembly, but the price tends to be higher.
So, we searched Webike to try CostCut using the available Universal Product, and decided to purchase a Fuel hose made by KIJIMA, which we have been using for a long time.
Incidentally, the 1997 SEROW225 WE will need three fuel hoses, each PipeFuel1 for $715. Pipe2 for $1,331. Hose for $275. for a total of 2,321 yen. (The "Spring Compression" used for Pipe2 will be used again.) 。
Did you receive the item as per the Image?
It has the same inside diameter as the SEROWOEM Product and is a supple and flexible fuel hose, which is natural since it is new.
Incidentally, the OEM fuel hose we had been using up until now had no cracks, but it had deteriorated over time and was in a bad shape, making us glad we replaced it.
How did you like it?
We replaced the above-mentioned CaChicatiHose with this flexible product and everything is better.
The two-layer Type is a reliable and secure product that is resistant to breakage even when curved.
[Points to note]
Several different sizes of HoseLineup are available in the same package, so be sure to check the inside diameter of the hose you want to replace and order the size that fits.
Too thick will increase the risk of fuel leakage, and too thin will affect fuel flow.
How did it compare to other products?
My personal impression is that clear type fuel hoses in pink, etc. tend to harden easily, which is not a problem for those who do not neglect daily maintenance, but for a lazy person like me, a product like this with high durability and weather resistance would be safer.
Other items that would be helpful
Point and hang of installation
I am not sure if I am doing it the right way, but if I apply a small amount of silicon grease during installation and insert it into the cook, it works Smoothly.
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
The most Large-picture work may be to insert it firmly and prevent it from coming loose with a firm hose band.
[ITEMS TO BUY TOGETHER
Hose clip if you have a new fuel hose. (Hose Band) may also be better to purchase new ones to account for age-related deterioration.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible, as it is necessary to replace the fuel hose on older motorcycles.
View detail
I would like to make Carburetor a Large thing.
I put it on after purchasing a slightly more expensive Carburetor to prevent Rust and Garbage from getting into the Fuel Tank. The price is reasonable and it is well made and this is the third time I have purchased this product. View detail
I can't find anywhere that sells parts.
This is very helpful since there are no Motorcycle parts dealers nearby,
The product is cosmetically excellent.
View detail
It's an old Motorcycle.
It is an old motorcycle so I installed it as a precaution. View detail
Used between Tank and FerCook in RENAISSA
The Lever is unexpectedly heavy, making it difficult to operate with one hand.
No fuel leaks or other problems have occurred, so it is ready for use.
View detail
RZ250 Fuerre Hose replacement
When the RZ250's Fuel Hose routing was changed, the Hose was also replaced.
I have been using KIJIMA's Hose for some time.
The last time I replaced the hose, I used KITACO's hose because of its imechain and price, but the hose hardened unexpectedly quickly and was hard to work with when removing and reinstalling the hose.
I still value workability, so I returned to KIJIMA.
The hose is flexible and easy to work with. It is also nice that it does not harden easily.
Home center sells a similar Pink hose, but it is not similar to KIJIMA's.
I recommend KIJIMA's Hose, don't just jump on it because it is cheap.
The drawback is that it is too soft, and if the bending radius is too small or too much force is applied, the hose will bend.
Even if the motor is large and sturdy when installed, it may break due to vibration when the motorcycle is actually running, and if it does break, the fuel supply may not be able to keep up and the motor may stop without gas.
If you want to make small bends, you can use a two-layered black hose.
View detail
Buy φ5mm for APE
The one I was using deteriorated, so I replaced it.
Color Hose changes the appearance.
View detail
Used to replace Fuel Hose on GPZ900R.
The Hose connecting NINJA's Fuel Cock to the carburetor is hardened,
I started having trouble removing the Tank, so I replaced it.
The Fuel Hose that was originally attached was measured to be 7.5mm in inner diameter and 14mm in outer diameter.
Most of the Fuel Hose Spec. have an inner diameter of 8mm, and this product is the only one with an inner diameter of 7mm.
I was not sure, and when I checked the actual product at 0aps for the first time in a while, I found that the product Package
The GPZ900R was found in the list of compatible vehicles on the back.
I was relieved and exchanged this item for a new one.
I'm afraid there would be a lot of inconvenience if the standard and bore diameters were to change...
Yes, Hose clamp is a Quantity:2pc. Set included.
View detail
You can see the inside of the Filter.
During some carburetor adjustments, I found a piece of a very Smallest Rubber? in the Float room. I did a lot of research and couldn't find the source so I decided to put a Filter on it.
This time, I decided to use a CUB, which has a matching hose bore diameter, small size, and light weight without magnet.
Bracketetetc. is not included, so you have to prepare it by yourself. Installation itself was easy and did not affect the surrounding lines even inside the Leg shield.
If you are attaching a Filter for the first time, you should be careful not to let the protruding part of the Bracket or Tie Wrap that you are attaching hit other Lines.
The product's mechanism is an orthodox mesh system:even when the Axel is opened by the governor, Gasoline passes through normally and the Engine does not cough.
The product appearance is also well finished.
The FilterBody shows the Manufacturer's name and the direction of fuel flow. The display is not sealetc., but a raised workpiece, which is good because seal can peel off or become dirty due to engine heat.
The product was securely packaged and sealed. I think this is necessary for products related to hazardous materials.
As a buyer, this is the kind of thing that makes me happy. In the past, an import from another Manufacturer purchased at another Site was sent to us just in a Vinyl bag.
Although the cause of this installation was not found in the end, it was found that it was not foreign matter from the fuel line by installing this product. I think another merit of this product is that you can see the inside of the transparent filter and mesh type to check for foreign substances.
View detail
Good quality item
The fuel filter keeps fuel running smoothly to the engine. Changing the fuel filter keeps the injectors clean longer, which means more power and better gas mileage. Bring your car or truck to any of our stores for a fuel system cleaning to get the most power from your engine. -(high quality product) FOR PERFORMANCE USE View detail
8mm petrol filter COMPLETE
Good petrol filter with fine mesh inside.bulding quality good with thicker plastic. This is 8mm outer diameter hose outer connector. View detail
Petrol filter cartridge
This is petrol filter with outer diameter 6.5mm. good quality including stanless steel filter mesh inside. Recommended View detail