Reviews
Very convenient!
I purchased the Tank when reviving it after more than 10 years of neglect, as I had many opportunities to take it off and on.
In conclusion, when you detach and detach the hose of Gasoline, there is no dribble of Gasoline and no damage to the hose.
It is very convenient to remove Joint with one hand.
Motorcycles, which rarely have the opportunity to remove and install the tank, may also have hardened fuel hoses,
I am considering installing it on my other Motorcycle as it seems cost effective.
View detail
It's an old Motorcycle.
It is an old motorcycle so I installed it as a precaution. View detail
Used between Tank and FerCook in RENAISSA
The Lever is unexpectedly heavy, making it difficult to operate with one hand.
No fuel leaks or other problems have occurred, so it is ready for use.
View detail
RZ250 Fuerre Hose replacement
When the RZ250's Fuel Hose routing was changed, the Hose was also replaced.
I have been using KIJIMA's Hose for some time.
The last time I replaced the hose, I used KITACO's hose because of its imechain and price, but the hose hardened unexpectedly quickly and was hard to work with when removing and reinstalling the hose.
I still value workability, so I returned to KIJIMA.
The hose is flexible and easy to work with. It is also nice that it does not harden easily.
Home center sells a similar Pink hose, but it is not similar to KIJIMA's.
I recommend KIJIMA's Hose, don't just jump on it because it is cheap.
The drawback is that it is too soft, and if the bending radius is too small or too much force is applied, the hose will bend.
Even if the motor is large and sturdy when installed, it may break due to vibration when the motorcycle is actually running, and if it does break, the fuel supply may not be able to keep up and the motor may stop without gas.
If you want to make small bends, you can use a two-layered black hose.
View detail
Used to replace Fuel Hose on GPZ900R.
The Hose connecting NINJA's Fuel Cock to the carburetor is hardened,
I started having trouble removing the Tank, so I replaced it.
The Fuel Hose that was originally attached was measured to be 7.5mm in inner diameter and 14mm in outer diameter.
Most of the Fuel Hose Spec. have an inner diameter of 8mm, and this product is the only one with an inner diameter of 7mm.
I was not sure, and when I checked the actual product at 0aps for the first time in a while, I found that the product Package
The GPZ900R was found in the list of compatible vehicles on the back.
I was relieved and exchanged this item for a new one.
I'm afraid there would be a lot of inconvenience if the standard and bore diameters were to change...
Yes, Hose clamp is a Quantity:2pc. Set included.
View detail
It is made by KIJIMA, so it is better than nothing.
[How is it used?
Used for Af09.
Was the one you received as per Image?
Yes
How was your experience with it?
It is made by KIJIMA, so it is better than nothing.
[Points to note]
I would recommend checking the Φnumber of Hose before purchasing.
How did it compare to other products?
Variation is also abundant, so I thought it should be made by KIJIMA….
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
Fine rust powder passes through.
Take it for a spin on the Hose from the Fuel Cock to the Carburetor. It is better than nothing. By the way, the rust powder of Tank passes through and enters the carburetor. Plastic deteriorates quickly over time, so we keep some in stock in case it breaks down. Replacing the fuel Pipe is quite tricky as it seems to be a simple but important part. View detail
Oil hose replacement
Oil hose cracked and replaced. View detail
Fuel Hose
CRM's Fuel Hose was cracked and was replaced. View detail
A Harley must have!
With the HarleyShovel Fuel Cock breakage and carburetor overflow, we decided to install this Fuel Filter.
The inside diameter of the hose was 7.9mm, so it took some force to insert it.
KIJIMA's Fuel Filter was previously installed on an XL1200C SPORTSTER 1200, so you can be assured of its quality.
I think this MODEL will MATCH Harley in particular.
Shake condition while driving due to severe Engine vibration.
Filter function is fine.
Since it is glass, the Hose was secured with Tie Wrap to prevent it from hitting the Cylinder.
I am satisfied with Large because it looks good.
View detail
Purchased for Restore for my old car.
The OEM parts were missing, so we used the alternative parts, but we are satisfied with the included clips. View detail
Can be visualized
I have had no problems without using Fuel Filter until now.
However, I saw someone I know wearing it and bought it to try it out because I could visualize the iron dust-like substance being removed.
Installation takes only a few minutes with no problems. I recommend it to anyone who cares to visualize it.
View detail
Prevention of Fuel Hose Bending
I think the main purpose is to Catch rust and Garbage with Filter, but I bought 90-degreesType to solve the bending of Hose.
A little more compact would be even better.
View detail
Very soft Hose, not for Gasoline.
I bought this for working with 2-stroke Oil and Brake fluid.
The Hose itself is very soft and can't be used for the purpose of sucking out the oil in the 2nd Oil tank.
Since the application was special, it doesn't relate to the imprecation score, but since there are many times when Hose is needed for maintenance applications, it is useful to have it in the toolbox.
The inner diameter of this product is 4mm, so please be careful not to make a mistake! The outer diameter is 7mm and it has a Clip.
I'm Syringe. (Syringe) I chose this inner diameter because it was intended to be mounted on a
Please be careful not to use it for Fuel line!
View detail
for Replacement
I used to install disposable Type, but I bought this one because it looks good, I can reuse it, and it's easy to check the condition inside. It is easy to check the inside condition. I hope it will last for a while. View detail
I'm putting it on just in case.
It is installed on the Carburetor to prevent foreign matter from entering the Tank and clogging it. Since there was no particular problem until now, I repeated the same thing. This time, when I cleaned the carburetor, I replaced the fuel hose with a new one. I decided to replace the fuel hose with a new one because I don't want the gasoline to leak out while driving. Garbage has never accumulated in the Filter so far, but I'll use it just in case. View detail
04 Used for ST250E
With windmill, changed from Mesh.
No flow problem. carburetorNORMAL.
The other thing is durability.
I thought it would be cosy.
View detail
For bleeding brake fluid.
The size of the inner diameter is perfect for Caliper's Breeder, so I used this for bleeding Brake fluid. It is easy to use because the length is 1 meter. It is easy to check the condition of the air bite. View detail
Make the most of the small space.
I bought a Straight Filter, but I changed it to this one because the hose seemed to break due to its handling.
When I used it in an image to put in the part that seems to be broken, the handling of the Hose is no longer unreasonable.
However, the Filter section is not very reliable.
It's a good idea to have a with Magnet L-Type for 6?hose because the body can be a bit larger.
View detail