Reviews
To Refresh the Fuel Cock.
[How is it used?
I bought a used SEROW225WE Tank, and I bought some Yamaha OEM parts from Webike to refresh the Fuel Cock around the Tank I had been using until then. But since the hose clip was a simple thing (although it is a sufficient part in terms of functionality), I decided to purchase this product to use for a more solid band.
I went to my neighborhood Home center to see if I could find the product I was looking for, but no matter how hard I looked, I couldn't find the product I wanted. Hose Band (screwed in) is not what we are looking for." I was painfully aware of the trend of the times... I guess the demand is low among the public.
Was the one you received as per Image?
The original OEM Clip for Yamaha SEROW225 is a simple needle-gold shaped component, but KIJIMA's Clip is a well-shaped product that gives a sense of security and is just like the Image product.
How was your experience with it?
It is a small but reliable and secure product that fixes Firmly and Hose to the Joint section.
The firmly attached part is tough to install with bare hands except for those who have a strong grip.
[Points to note]
A slight difference in size can be managed by brute force, but too large or too small can be problematic, so do not be in a hurry to measure the outside diameter of the hose before ordering the required number of pieces.
How did it compare to other products?
There are many similarly designed hose clips available from other companies, but all of the Manufacturer's products serve their purpose well (I have never had an inferior product in my hands when it comes to clips).
Other items that would be helpful
Point and hang of installation
As a matter of course, let's pass the Clip through the hose first before jointing the hose.
I'm embarrassed to say that after plugging Hose in the past "Oh, I didn't put Clip in." What a mess.
[ITEMS TO BUY TOGETHER
Depending on the time and circumstances, fuel hoses also deteriorate over time, so if the fuel hose is old and cracked, it should be replaced with a new hose (if the fuel hose is hardened and cracked, a trouble may occur at any time).
[Opinions and requests to Manufacturer
I have a similar Design product available from several companies, "Horse clip" (sometimes) Hose Band. When searching on Webike, the product names are different, such as Search name I was lost in
View detail
Fits: HONDA CRF250RALLY S, HONDA CRF250RALLY, HONDA CRF250L
It looks sturdy!
I had a feeling that the bracket of the side cover was bent a little after being bumped twice on the Left side (coolant sub tank side) and if I bumped the Right side, the Radiator would be damaged, so I installed the Radiator. The product is made of steel and seems to be sturdy.
I read in your impressions that you had a hard time installing it, but I was able to just pop mine on. I don't know if they have improved it or if it just happened to be a hit.
The upper part uses the OEM bolt (Wrench 8mm) as it is, but the other two bolt positions are replaced with the enclosed Hexagonal Wrench bolt. The installation instruction manual and a small KIJIMA oval sticker were enclosed.
View detail
Fits: HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub]., HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub].
Well, it's usable.
I was worried that the Breather part would break, but Large was sturdy. I am concerned about the appropriateness of the packaging of the product. It is bulging because it was put in forcibly. View detail
CUB We decided to go with Blowby hose of
CUB I used it for a Blowby hose from It was cheaper than Mukawa. View detail
It's solid
Solid, stiff, works fine. View detail
CB250 Fuel Hose replacement
I replaced the clear hose with this black hose on my Cb250 Export, but the hose clip is too loose and I can't use it. View detail
Fits: HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub]., HONDA monkey, KAWASAKI KSR110, HONDA CUB [Cub].
Good!
Purchased to create a Line with RANMax
Happy with Tappet and matching!
View detail
Used for hose handling
[How is it used?
Breather Hose 650mm 6mm Diameter Used for routing
Was the one you received as per Image?
Yes
How was your experience with it?
SMART with Hose stopper
[Points to note]
so far none (with neg. verb)
How did it compare to other products?
Easy to check Emulsion retention due to translucency
View detail
For Blowby hoseSize conversion
I ordered a KIJIMA product that can be used to change the size and routing of a blowby hose.
Durability is just the beginning.
View detail
Bridgestone made
It's Bridgestone's Universal Hose, and you can find it in Single Body if not KIJIMABrand.
I use it for oil cooler and it seems to work well for oil catch tanks in terms of size.
I have used many different Hose and this Series seems to be the best quality.
We have this Bridgestone Hose that has been used and outdated for about 5 years, but it is still resilient enough to be totally usable.
View detail
Just the right hardness
It is not strangely soft or hard, but just the right softness.
I had to turn the hose around to connect it to the Carburetor, but it doesn't crumple even when bent tight.
View detail
Unversal is low
[How is it used?
TZr250R that came with the original (3XV) The Fuel Hose of the "Fuel Hose" was a cutchica, so we replaced it with this product.
I had been using NTB products in other sizes, but there was no lineup for 8mm or larger, so I chose this product because it was available in that size.
Was the one you received as per Image?
I received a Hose with BridgestoneLogo printed on it.
How was your experience with it?
To be honest, it was not good enough for my use.
This Level has synthetic fibers and is quite thick, making it difficult to cut.
Therefore, if you try to use it on a Pipe with a diameter above 1Size, it will not fit at all, even if you put a lot of effort into it.
If you only use the Neck for that diameter, there is no problem, but the Neck cannot be used in any other way.
Nevertheless, the pressure resistance performance seems to be great, so it is good for areas under pressure.
[Points to note]
As mentioned above, it is not easy to use.
Also, it only supports water temperatures up to 60 degrees, but on the WaterLine! What about the explanation that,?
How did it compare to other products?
NTB's was flexible and could be used for a slightly higher Size, but it is less universal by comparison.
【Review】
The hose is hard and cannot be reused.
Since it is made by Bridgestone and seems to have high pressure resistance capacity, it would be good for such applications.
View detail
No. 1, No. 4, No. 2, No. 3 intake manifolds connected for Hose conversion (Part 1)
This is a conversion from the existing Hose with a 4mm inner diameter to a 6mm inner diameter (item no. 105-064).
Hose with an inner diameter of 4mm is installed from April 2020 to January 2022, and with 36 days of actual use and 4,800 km of actual driving, Color:The gray tones were brownish and blackish with a hardening effect.
Remember to replace it every two years as a consumable.
View detail
Required for oil catch
About quality and texture It's well made. Once it's fixed, it can't be separated well About the feeling of use be properly set up Products to buy together Corresponding hose Difficulty of installation easy, simple Cost performance and comparison with other products The price of a well-made product is good, too About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I connected it with a gas pipe connector before installation, and engine oil leaked out. But there's no need to worry about this product View detail
It's made by Bridgestone, so you don't have to worry!
Oil was leaking steadily from the oil line of the shovel head, so we replaced it with this Hose.
I feel that the Rubber hose deteriorates quickly over time, especially for Shovel, which generates a lot of heat.
The corresponding Hose was thick, so this HoseInner Diameter:We selected 12mm.
Hose surface "BRIDGESTONE" It makes me feel good just to write that I am a good person.
The overall length is 1000mm, which is very helpful for Shovel with many oil lines.
There are 4 different sizes (6, 8, 9, and 12mm) to choose from, so you can choose the Large body here. Oil Resistant/Pressure Resistant Hose This can be covered by
Even though the oil line has been replaced, the oil leakage from the shovel has not gone away.
We will continue to move forward where we can take any action we can.
By the way, Fuel Hose is Continental." made and full of Tire makers!
You can rest assured!
View detail
First of all, look at Psycho!
It looks Psycho cool, and I like it. The material is smooth and the mesh is fine, so I think it provides sufficient wiring protection. I think the material is smooth and the mesh is fine enough to protect the wiring. I would appreciate it if the price were a little lower. View detail
Blue in winter It is in red in summer. A sub tank to radiator 8 phi engine 6phi Use it from a radiator.
Blue in winter It is in red in summer. A sub tank to radiator 8 phi engine 6phi Use it from a radiator. View detail
Prices were also there, then good quality.
Prices were also there, then good quality. View detail
It purchases in order to make it Mr. SUKESUKE of the radiator line of a zoomer (ruckus). The hose from a radiator to a pump can exchange with this product.
It purchases in order to make it Mr. SUKESUKE of the radiator line of a zoomer (ruckus).
The hose from a radiator to a pump can exchange with this product.
View detail
Fits: HONDA ZOOMER(Ruckus), HONDA Byte
It is a recommend to the person ! only with a pure cap which is not black smart even if it purchases a special radiator tank.
It is a recommend to the person ! only with a pure cap which is not black smart even if it purchases a special radiator tank. View detail