Reviews
Unversal is low
[How is it used?
TZr250R that came with the original (3XV) The Fuel Hose of the "Fuel Hose" was a cutchica, so we replaced it with this product.
I had been using NTB products in other sizes, but there was no lineup for 8mm or larger, so I chose this product because it was available in that size.
Was the one you received as per Image?
I received a Hose with BridgestoneLogo printed on it.
How was your experience with it?
To be honest, it was not good enough for my use.
This Level has synthetic fibers and is quite thick, making it difficult to cut.
Therefore, if you try to use it on a Pipe with a diameter above 1Size, it will not fit at all, even if you put a lot of effort into it.
If you only use the Neck for that diameter, there is no problem, but the Neck cannot be used in any other way.
Nevertheless, the pressure resistance performance seems to be great, so it is good for areas under pressure.
[Points to note]
As mentioned above, it is not easy to use.
Also, it only supports water temperatures up to 60 degrees, but on the WaterLine! What about the explanation that,?
How did it compare to other products?
NTB's was flexible and could be used for a slightly higher Size, but it is less universal by comparison.
【Review】
The hose is hard and cannot be reused.
Since it is made by Bridgestone and seems to have high pressure resistance capacity, it would be good for such applications.
View detail
Required for oil catch
About quality and texture It's well made. Once it's fixed, it can't be separated well About the feeling of use be properly set up Products to buy together Corresponding hose Difficulty of installation easy, simple Cost performance and comparison with other products The price of a well-made product is good, too About shipping and packaging It took a week and the packaging is great Any concerns, cautions, or advice when purchasing I connected it with a gas pipe connector before installation, and engine oil leaked out. But there's no need to worry about this product View detail
It purchases in order to make it Mr. SUKESUKE of the radiator line of a zoomer (ruckus). The hose from a radiator to a pump can exchange with this product.
It purchases in order to make it Mr. SUKESUKE of the radiator line of a zoomer (ruckus).
The hose from a radiator to a pump can exchange with this product.
View detail
Worn for insurance purposes
Purchased on Amazon on 05/22/2018
Fortunately, I haven't come across a situation where I have to use it yet, but I have to protect the Radiator in case of an emergency I installed it with the expectation that it would be installed It is designed to interfere with the Cowl in installation and comes with an interference material
It may not look like it, but it gives you peace of mind if it happens
View detail
One item as expected
I think that Hose itself is wonderful, but I regret that Hose clip is a skusca. I attached it to the Carburetor and fastened with the attached Clip but pulled out by hand to dismount it. View detail
Fits: HONDA ZOOMER(Ruckus), HONDA Byte
attaching, since it is a free Cap -- so and so -- it is not. Merely sell by a Set only!
attaching, since it is a free Cap -- so and so -- it is not.
Merely sell by a Set only!
View detail
I purchased for uniting two hoses. Although it is a simple connector, it would be troubled if there is nothing. Although Y type and T type are also required, of course, I think it would be convenient if there is two parallel exits like a tuning fork.
I purchased for uniting two hoses. Although it is a simple connector, it would be troubled if there is nothing. Although Y type and T type are also required, of course, I think it would be convenient if there is two parallel exits like a tuning fork. View detail
Fits: HONDA ZOOMER(Ruckus), HONDA Byte
It purchased together with the radiator tank. The condition of plating does not have a radiator tank and a difference, either and a feeling of unification comes out of it. We recommend you to purchase by the tank and a set by all means.
It purchased together with the radiator tank.
The condition of plating does not have a radiator tank and a difference, either and a feeling of unification comes out of it.
We recommend you to purchase by the tank and a set by all means.
View detail
It is used for a zoomer (ruckus). A clear hose is formed and favorite radiator liquid is poured in. Since admiration comes out for a while custom but [ this much ] unlike normal, it is recommended. After exchanging, it is necessary to certainl
It is used for a zoomer (ruckus).
A clear hose is formed and favorite radiator liquid is poured in.
Since admiration comes out for a while custom but [ this much ] unlike normal, it is recommended.
After exchanging, it is necessary to certainly carry out air-bleeding.
I think that it will become still more beautiful if it is a near hose more transparently.
The point which is not a transparent hose is satisfactory at least at a minus other than it.
View detail
It purchased in order to attach the sub tank of G craft. Since it was goods currently recommended by the manufacturer, it did not waver.
It purchased in order to attach the sub tank of G craft.
Since it was goods currently recommended by the manufacturer, it did not waver.
View detail
It is a diameter of a line to a tank and a radiator at the time of plating tank exchange of a zoomer (ruckus). If it is made Mr. SUKESUKE, it will be right or wrong.
It is a diameter of a line to a tank and a radiator at the time of plating tank exchange of a zoomer (ruckus).
If it is made Mr. SUKESUKE, it will be right or wrong.
View detail