Reviews
Fits: KAWASAKI NINJA600R C1-10, KAWASAKI Z750GP, KAWASAKI Z1000R, KAWASAKI 1000GTR, KAWASAKI EN400, KAWASAKI Eliminator 400, KAWASAKI Z750FXII/III, KAWASAKI Z750FXII/III, KAWASAKI Z400LTD, HONDA GL1200 Gold Wing, HONDA CBX1000, HONDA CB900F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F
Magnetized, higher than OEM
I always use OEM, but this time I switched to KIJIMA's Magnet. We will see how it goes. View detail
Filter part is pricey
If you want to put a Filter between the Fuel lines, it is difficult to bend the Hose if it is short, but if it is angled like this product, it will be neat. View detail
Fits: HONDA GB350, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side, HONDA Side by Side
Cospa is nice.
The box says Dualfor Clutch, but no problem, CROSSCUB110 (JA45) It can also be used in
I replace the Filter every two Oil changes.
Cost performance is the best because it is cheaper than OEM
View detail
Fits: YAMAHA XSR900, YAMAHA YZF-R1M, HONDA NC750X, HONDA NM4-01, HONDA NC700S, HONDA NC700X, HONDA NC750X, HONDA NC750X, HONDA NC700X, HONDA NC700X, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA FAZE Type S, HONDA CTX700, HONDA CTX700, HONDA FAZE, HONDA FAZE, HONDA FAZE
Very ordinary Oil Filter
It is very common, but there is a Merit that can remove foreign objects in the Engine because it contains Magnet.
I always choose with Magnet's Oil Filter because I think it is better to have it than not to have it.
View detail
I like the way it looks.
The Fuel Hose is Black and invisible. I bought it because it seemed to have a good evaluation here to prevent foreign object contamination.
It is a good product because you can see inside and check the status, and it can be detached and disassembled for cleaning.
It is somewhat heavy, but is it reinforced to prevent damage? I thought so.
View detail
Be careful how you handle it or it will crush you.
I purchased this product for the installation of a Fuel Filter.
Because of its thin wall thickness, tight handling will cause the hose to collapse and reduce the flow of Gasoline.
I find it convenient to be able to visually see the flow of Gasoline due to its translucency.
It is not as durable as Rubber hose, but I think it is unlikely that you will run out of this one purchase.
View detail
キャブレターにオイルが落ちる前の防錆に。仕様によるサイズご注文の前に必ずお読みください。 View detail
燃料タンク内に若干の錆が発生している車両に最適です。そして美しくスタイルされた設置の際はケーブルのサイズを確認する必要があります。 View detail
I'm a Manufacturer with a touch of trepidation.
Material of KIJIMA:Rubber products are not the same Size as OEM Product and are all scary.
The filter coverO-ring is too stiff to use, and the filter-equipped rubber is too thin in inner diameter, so I have nothing but apprehension.
It is a DREAM50 OEM compliant product, but I use it because it is compatible with Mukawa's Special clutch Oil Filter.
So please be responsible for anything that happens.
View detail
It's for DREAM but ….
Compatible with Mukawa's Oil Filter for Specula.
I use this one because it is cheaper than the one made by Mukawa.
View detail
Fits: SUZUKI GSX400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GSX-R400, SUZUKI GS400E, SUZUKI GSX400, SUZUKI GS400E, SUZUKI GSX400, SUZUKI GSX400, SUZUKI GSX400, SUZUKI GSX250L 3-5(86), SUZUKI GSX250E KATANA S 83-86, SUZUKI GSX250E KATANA 1-5 83-86, SUZUKI GSX750 KATANA
There is no Gasket.
I bought it because it was cheap, but it did not include Gasket, so I had to buy it separately.
I think the quality is fine, but I did not like the fact that KIJIMA's Name was not included.
DAYTONA has a Name, so I think that would have been better.
View detail
Oil drain
What should I do with the oil drain? It's hard to throw it away! View detail
Fits: TRIUMPH Adventurer, TRIUMPH America, TRIUMPH America LT, TRIUMPH Bobber Black, TRIUMPH Bonneville, TRIUMPH Bonneville Newchurch, TRIUMPH Bonneville SE, TRIUMPH Bonneville T100, TRIUMPH Bonneville T100 Range, TRIUMPH Bonneville T120, TRIUMPH Bonneville T120 Black, TRIUMPH Bonneville T120 Range, TRIUMPH Daytona, TRIUMPH Daytona, TRIUMPH Daytona 595, TRIUMPH DAYTONA 600, TRIUMPH DAYTONA 650, TRIUMPH Daytona 675, TRIUMPH Daytona 675 R, TRIUMPH Daytona 675 SE
just right (time)
Many MotorcycleParts are expensive, but KIJIMA is Reasonable and helpful.
Even for such a small product, OEMs of foreign cars are expensive.
It is nice to see a wide range of car models available.
View detail
Fits: HONDA CB1100EX, HONDA CB1300SB, HONDA CB1300SF, HONDA CB1300ST, HONDA CBR250F, HONDA CBR250R, HONDA CBR250RR, HONDA VFR1200F, HONDA VFR1200X, YAMAHA BOLT, YAMAHA BOLT -C, YAMAHA BOLT R, YAMAHA FZ-1, YAMAHA MT-01, YAMAHA MT-01S, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 TRACER, YAMAHA SR400, YAMAHA SR400S
Poor magnet power, overall quality is ok
For a Japanese item, I expected the magnet to be powerful, but it is very weak, I think, this magnet will be hardly able to catch anything at all. Design is ok, cost is cheap, magnet is cheap too View detail
For Sub tanks
I bought this because of the possibility of contamination of garbage when using a Sub tank without any Filter.
I have no complaints, but I found it a little confusing that there is no description of the direction of the Filter.
View detail
KIJIMAFuel Filter
I tried installing a cheap Filter before.
I purchased KIJIMA's Filter, which looks great this time!
It's a Glass type that allows you to see inside well and clean it, so it's a commendation!
View detail
Nylon meshL shape
There are many types of Fuel filters, but it is difficult and troublesome to know which one to buy at a glance.
I needed an L-shape for handling, but it was a hassle to find an L-shaped Gold genus Filter one, so I went with this one.
View detail
I bought a few different kinds.
I have been using PaperType so far, but I also bought Nylon mesh Type.
Nothing personal, but it is a little more compact, so handling in the vicinity of the carburetor is improved. The resistance is gone, but I am observing whether the Float chamber contains Garbage or not.
View detail
Unversal is low
[How is it used?
TZr250R that came with the original (3XV) The Fuel Hose of the "Fuel Hose" was a cutchica, so we replaced it with this product.
I had been using NTB products in other sizes, but there was no lineup for 8mm or larger, so I chose this product because it was available in that size.
Was the one you received as per Image?
I received a Hose with BridgestoneLogo printed on it.
How was your experience with it?
To be honest, it was not good enough for my use.
This Level has synthetic fibers and is quite thick, making it difficult to cut.
Therefore, if you try to use it on a Pipe with a diameter above 1Size, it will not fit at all, even if you put a lot of effort into it.
If you only use the Neck for that diameter, there is no problem, but the Neck cannot be used in any other way.
Nevertheless, the pressure resistance performance seems to be great, so it is good for areas under pressure.
[Points to note]
As mentioned above, it is not easy to use.
Also, it only supports water temperatures up to 60 degrees, but on the WaterLine! What about the explanation that,?
How did it compare to other products?
NTB's was flexible and could be used for a slightly higher Size, but it is less universal by comparison.
【Review】
The hose is hard and cannot be reused.
Since it is made by Bridgestone and seems to have high pressure resistance capacity, it would be good for such applications.
View detail
As a carburetor for RepairHose
The carburetor hose was ruined, so I purchased this product to replace it.
The vehicle model is Husqvarna 2016 TE250.
Hose with an inner diameter of 4φ×outer diameter of 7φ and a length of 1m.
Clip×Quantity:2pc. I am glad that it comes with Set.
It is not long enough to replace all of the hoses used on off-road motorcycle carburetors.
In this case, you need to check in advance how many meters you need and look for longer products or buy several of them.
View detail