KIJIMA Motorcycle Engine Parts Reviews

Filter

Write a review and get Webike Points!

Reviews

APE100 KIJIMA Engine Parts Clear all

KIJIMA

15 May 2023

Rubber insulator

Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50

Japanese Webike user

5/5

Difference between K507-602 and 604

48mm is already a Quantity:I've bought about 5pcs. and have no complaints at all, so I have high expectations for this one too.
With Mukawa and Minimoto, the Crack cracked and ended up not lasting a month, but with KIJIMA, several years are assured.
The most important thing to remember when assembling the Bolt is not to overtighten the Bolt.
The 48mm 1pc. was over-tightened, distorting and ruining the reinforcement plate inside.

By the way, besides this K507-602, there is another one called 604, but no one has mentioned what exactly is the difference.
The difference is the shape and position of the mountain that fits into the anti-dislodgement groove on the carburetor side.
This 602 is made to fit KEIHIN grooves as it says it is PE28 compatible.
When viewed from the carburetor slot, the mountain is slightly triangular in shape and deeply attached.
PWK28 is the same, and a small CR or FCR carburetor body can also be attached if it fits.
And 604, but it is VM/TV26 compatible and the mountain is round and attached in a shallow position.
TMR28 also seems to fit.
I see that the Rib dimension in Mikuni's Spigot ring dimension chart is different between KEIHIN and Mikuni.
There is such a difference, so make sure you buy the right one.
Especially note the carburetor that can be replaced by a Spigot.
Well, I think KIJIMA is a bit unkind… The dimension chart looks the same for both with a 35mm mounting diameter.
AlreadyQuantity:1pc. if you have a picture.
By the way, Hi-Chi Trading had a picture.
Good luck with WeBig. View detail

KIJIMA

01 Jul 2020

Rubber insulator

Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50

Japanese Webike user

5/5

Introduction to Repair.

Idling in APE is unsettled. The change is strange.
This time, I removed the carburetor and found that the Insulator was broken.
Funnel and our predecessors wrote that the owner of the Power Filter seems to be well I used Takekawa Duct for my OEM case and I was picking up various information. I'm not sure if it's a good idea. I was late in discovering it because I was thinking.
Because it is a No Brand Insulator, the thickness of the wall is thin and the one that is compatible with PE28 is used for PWK28. Used.
The insulator's retaining rib is not fitting well, and it is loosened and increased by the band. I tightened it up and repeated the process, and I think the cracks came in.
This time, because it is a product of the famous Brand, I think it is Large sturdy, but it is necessary to divide it with the consumable goods That's what it seems like.
I'm hoping to give it 4 stars for its future life expectancy. View detail

KIJIMA

04 Apr 2017

Rubber insulator

Fits: HONDA Ape 100, HONDA Ape 50, HONDA Ape 100, HONDA Ape 50

Japan User(translated)

4/5

For TM-MJN24.

【What made you decide the purchase?】
Price and Size.
【How was it actually used?】
I used it to attach MJN 24 to CUB 90. It is good feeling with Exactly.
【Was it difficult to install? (Hard parts case)】
Manifold of CUB 90 and hole Pitch match, but step adjustment is necessary.
It is still difficult to balance with CUB 90 OEMAir cleaner.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Although not particularly, it is safe to use liquid Gasket.
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) ]
None.
[Is there anything I was disappointed about?]
There is none.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Although it is not especially, it is saved if it is a little cheaper.
【Have you compared items?】
YOSHIMURAOEM Manifold
[Others]
I bought it for installing MJN 24 in CUB 90. As far as the carburetor side is customized Exactly without gaps
Attaches. On the Manifold side, 90 and Pitch are almost the same, but because there is a difference in level at the inlet, adjustment is essential.
Depending on the year, it is difficult to use C90's OEMAir cleaner because the front and rear lengths of carburetor and Manifold increase.
Become. If you process a C50 Air cleaner that is short and short, it seems to be possible somehow (But I have not tried it).
It is relatively inexpensive but construction is solid and it is very good.
It does not compare with Chinese cheap Manifold. When suddenly breaking or sucking secondary air with insufficient precision
Because it leads to blow if you do not do it well, you'd better buy the right one like this product. View detail