Reviews
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
4 amps, 2 mouthfuls.
My first impression is that it is huge. My first impression is that it is huge.
Since the special harness is sold separately, installation was easy.
It is not a dedicated kit, so it is necessary to cut the wiring. However, it can be fixed to a handlebar, so it is an advantage to be able to adjust the length. I think it is an advantage.
I usually use a cheap Chinese ActionCamera all the time in place of a driver's recorder.
I haven't tried charging Portable navigator yet, so I don't know.
It seems possible to only charge the phone (Pixel 6a).
I don't know how it works with the constant use of the Navigation app, as I haven't tried it.
It seems to be turned ON-OFF with Cap, but I don't know how it works.
For now, … I think it's a good thing to say. Personally, I think it's a good idea.
View detail
Easy to install
There are many small type USB ports, but they often have a large unit in the middle of the wiring, which makes it difficult to find a place to attach the large unit. This product, on the other hand, is easy to install because the unit is integrated into the product.
Minus one star because the bolt rubs on the handlebar and scratches the handlebar a little bit.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Must-have for Touring
Installation was easy if the Instruction Manual was followed. View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Easy installation
Installed on CT125. It is an exclusive product and easy to install and I am satisfied with the large change.
I was able to install it on my JA65 without any problems.
View detail
Small, unobtrusive, and good to be able to MonitorRing the battery status.
[How is it used?
Mounted on a ZX6R 2023. For charging your phone or Lap timer.
Was the installation difficult?
The ZX6R G-type has an Attachment power supply under the Right inner cowl.
There is a BlueWhite + side and a BlackYellow Earth side inside the Waterproof Rubber cover along with a RightBlinker Connector.
Once the Bullet Terminal processing of this product is complete, it is easy and convenient to install by simply inserting the terminal.
The problem is where to put the USB port. ZX6R has no space around the handlebar. I mounted it on the SIDE of the Ram Air Duct, which is fixed with Magic tape so it is easy to remove.
Most people would install the Multi Bar and attach the insert there, but I had a hard time because I don't like clutter around the Handlebar and didn't want to install the Multi Bar.
The picture of the product does not show a Bullet Type Terminal, but in reality, for some reason, a Male Terminal was attached to Both Sides.
【good point】
It is good that it is Compact and unobtrusive. It also has a Lamp that tells the battery status, so it can be used as a simple voltmeter.
Anyway, it is a recommendation for those who do not want to put anything conspicuous around the Handlebar.
[Bad point]
It is unusually hard to insert the USB port into the slot. I don't know if it is made hard so that it won't come out while driving, but it would be easier to use if it were a little easier to insert.
Minus the slightly higher price.
It also has one port, so it is not convenient for those who charge various things or use Grip heater.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
No discomfort
Quantity without problems:Set is ready.
Removing the DummyConnector in the light box is likely to break it if you are not careful.
Also, the hole in the back of the light box is unexpectedly large, so rainwater will probably enter the box unless it is binded together with other wiring during the wiring process.
Product lid color is Color:Black would have been better than Gray, Rubber looks degraded.
View detail
Things are good, but a bit big
There is nothing to worry about in terms of installation, and the performance has not been a problem or failure so far
Charging speed is not bad either
It glows green when the power is on
It's not a bad product, but the Socket installation part is a little bit large, so you need to install it well If you don't have it, you may be wasting your presence (We are the NINJA2 Helmet50RR, and it's not attached to the handlebar to begin with (Double-sided tape to put it in a good spot)
Well, it's a good product for a USB Socket in this area
View detail
KIJIMA USB Charger Twin Port 2
Not yet installed, the design is more fashionable and the colors are diverse.The KIJIMA USB charger brand is more assured. View detail
USB is Quantity : 2pc. Set Useful, convenient
I bought it for installing Radar detector and Dorareko.
Wiring of the power supply was also easy.
When attaching the Body to the Handlebar, Ducati was worried about attaching it for the Taper Handlebar,
I could install it by tightening Screw little by little.
What is worrisome during use is that the lid may hang because it is hanging.
I wanted you to devise this neighborhood.
Because the price is also cheap, it may be useless. There is no problem after that. ,
View detail
Spare 4 A
Previously we used USB ports compatible up to 2A mainly for charging smartphones. However, when I recently replaced my smartphone, the charge Lamp will not light up but it will charge. Perhaps thinking that output of the port will be insufficient, it will now be able to charge without problems if you exchange this product for 4A compatibility.
In recent smartphones, the amount of current required for charging is increased by Large as the Battery capacity becomes larger. Products of this type are mainstreamed to 1A ~ 2 A, but it is often insufficient and you should be careful.
Also, this product has the function that when the Waterproof Cap is closed, it turns off and turns off the LED, but this is convenient for what kind of mind. If you connect directly to Battery without going through the Main switch of Motorcycle, you can use USB power supply even when the key is unplugged, and if you do not use it normally you will not drain Battery if you close Cap.
View detail
Very useful
I bought it for installing Navigation and Radar. Until now, I used MobileBattery as a power source, but after all it is Large and convenient to get power from Motorcycle. You do not have to worry about losing Battery on the way, you can also charge smartphone so you can tour with confidence. Although it is directly from Battery for installation, it is taking power from key ON just in case. However, it is better if it is a slightly more SMART form but I am satisfied with the use. View detail
Look and display Lamp is good
MINIMOTOMinimoto : 4764
Exclusive Accessories Power Supply Take Off 4-pole Coupler for HONDA GROM / It is use with MSX.
It was easy to install at the same time.
Turn off the terminal for Battery attachment and replace it with Bullet terminal ♂ terminal.
Just thinking that it is Wiring up to Battery, Wiring itself was too much.
View detail
For charging the smartphone
Used for charging Smartphone. It is hard to understand in the photograph, but it is quite dull and it is quite decky, it is difficult to secure the installation space. However, if you have Space about half of the actual machine you can force it, so I think that there is a reasonable Hold power.
Unlike the past MODEL, the lid is translucent. ON on opening and closing / Can be turned off. The product photo LED is Blue, why is my color Green. Which is right is unknown.
Since there are several similar items, please carefully select and choose.
View detail
It is easy to use
I liked the color of Metallic orange and bought it.
Band for fixation looked cheesy in White, so I painted it on Heat resistant Black and used it.
View detail
Handlebar around, but Simple too - - -
Looking at the manual, even if it is attached to Direct to Battery power consumption (When not using) I purchased it by saying that it is very few.
It took about 2 hours to install, but there is nothing as difficult as before.
Because I just took time to do Wiring between Tank and Frame.
Since I have not yet gone to Long touring, I do not have a place to play but I do not think there is any problem.
I think that there are few people who attach the thing which said this to the V7 of MOTO GUZZI very much, but I thought that I should refer to it somewhat, I tried raising.
View detail