Reviews
There is a sense of security dedicated to the car model.
DL1000 V-STROM650XT ('22) The product has been installed in a
It will be used in conjunction with Hepco&Becker's Engine Guard,
The bracket of the Radiator part was a little bit hit by the Guard,
The installation was only a little difficult, but it was almost interference-free. I think there may be individual differences, so this is just for reference.
Because the connection between the Fog Lamp and the included Harness was a Flat Terminal,
We changed to WaterproofCoupler just in case.
The brightness is sufficient for an auxiliary light,
Cutline is also solid, so I don't think it will bother oncoming traffic.
Considering the price, the texture might be a bit lacking,
If you are concerned about this, you should consider another product.
View detail
Slim impression
I purchased these to install on my 2014 S1000RR.
The second model has been replaced by a narrow LED blinker, which is also attractive in its own right, but we wanted to make the most of the SS design, so we decided on this less conspicuous product.
The installation itself is completed only with Torque and +Screw.
Instruction is also clear and Quantity:Pair (for Left and Right) There is also an indication so you will not make a mistake.
However, since it is LED, high flasher will occur. I don't mind it that much, but those who care about it may be bothered.
Well, when you are on it, you can't see it because it is a very Compact Blinker.
Note that the Crimp on the Connector and wire may be a little weak and may come loose. Be careful when attaching and detaching.
View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSSCUB110
Does not fit 23 year old JA56 products
I ordered several parts from We Bike and installed the ones that fit.
Surprisingly, there are too many incompatible parts.
It does not fit the JA56 model, which is an officially imported product from Korea.
Machining is required when installing. Please keep this in mind when purchasing from Korea.
-------------------------------------------------- -------- We are ordered by ordering various parts from Webike, but there are too many parts that are unexpectedly compatible. It is not suitable for the JA56 model, the official imported product of Korea. When mounted, processing is required. Please refer to the purchase of Koreans. Powered by Google Translator
View detail
For external Blinker installation
Used for SWORD SIGNAL installation by Sphere Light.
Although it should be used with the company's Blinker, it is also applicable to Sphere Light products because of its M8Size.
Although it may be possible to attach the blinker directly to the cowl, we are using it to prevent cracking and to hide the base.
View detail
MONKEY125 Sequential Blinkerization
Purchased to convert MONKEY125 (JB02) to Sequential Blinker.
BlinkerUnit is a Chinese product purchased from Ariek.
I bought a KITACO UniversalRelay (755-0400940), thinking that any Relay would do as long as it was LED and high flasher compatible, but it did not light up all the way.
Apparently, the blinking time is too short and it does not light up until the end (normal if it is a batch).
I wandered around the Net wondering what to do, and I found a post on this Relay review recommending it for sequential use.
I bought it thinking it would cure the problem, but the results were the same.
I think that JapanManufacturer products from DAYTONAetc. will shine until the end.
It seems that not all Sequential Blinkers, but the one I happened to buy was a Spec. that doesn't glow all the way through unless it is energized for a long time (Relay is not bad).
As a first aid measure, short the L and B terminals of Relay's Car Both SidesConnector, although the Indicator in the Meter will not flash (always on),
It is now glowing to the end.
We are currently waiting for an adjustable Blinker relay.
The range of illumination is similar to that of KITACO's Relay, and if used on a MONKEY125, the large size is not much different from the OEM,
I wonder if KITACO is better.
View detail
Fits: HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA CROSSCUB110, HONDA SUPER CUB110, HONDA CROSSCUB110
A product that is unfriendly in many ways and a great hassle for the User.
[How is it used?
Installed on CROSSCUB110 JA60.
Was the one you received as per Image?
The quality is good because it is a well-known manufacturer.
Was the installation difficult?
Troublesome points
(1) The mysterious work of cutting off the OEMHarness3PCoupler of the Tail lamp and changing it to Bullet Terminal, which is also noted in the product description, is absolutely impossible with CROSS CUB.
CROSS CUB should never be cut if you cannot remove the exterior because the OEMHarness length of the Tail lamp is Limit.
In order to remove the tail lamp and License Plate Bracket, it is necessary to remove the rear suspension as well.
It is necessary to rose the Tail lamp unit and remove each Blinker.
The angle was not fixed when attaching the blinker to the bracket of the product, so the angle was corrected many times after installation. (It is hexagonal and delicately positioned, so that is also troublesome)
(4) Waterproof treatment is necessary because the wiring etc. will be exposed due to the fact that the appearance is reflected.
How was your experience with it?
It looks crazy good.
It is a world apart from the wild OEMTail lamp.
[Was there anything that disappointed you?
As I tend to say when reviewing CROSS CUB's Custom parts, it should be possible to set Wiringetc. to Couplet-on, etc., but for some reason, it is not cost-effective to use Bullet Terminal processing.
Couldn't the Blinker angle be made to fit exactly?
The connection of the license lamp is a Bullet Terminal, so there are concerns about waterproofness.
Waterproof treated with Harness tape.
I wonder if this place could not be made WaterproofCoupler as well.
Point and hang of installation
Beginners should be careful because the Instruction Manual is not easy to understand anyway.
Note that disassembly of the Tail lamp unit and removal of the License Plate Bracket are omitted in Tension, which you know.
The Instruction Manual says that the OEM Tail lamp harness should be modified to Bullet Terminal, but it is outrageous to cut the OEM harness, so I modified the Bullet Terminal part of the Cable that came with the product to 3PCoupler and connected it directly to the Tail lamp harness. I modified the Bullet Terminal part of the Cable that came with the product to a 3PCoupler, and connected it directly to the Tail lamp harness.
It makes no sense why the OEMHarness should be processed to Bullet Terminal when the attached Cable should be processed to Coupler from the beginning.
The installation is relatively difficult and is recommended to be done by Shop.
View detail
Corrosion.
Since it is plating, it will corrode after use, so it needs to be rusted off and repainted. The strength and usability are not bad, so I would like to see the product made of Stainless Steel if possible. View detail
KIJIMALoading Rack Nut
KIJIMA Loading Rack Nut installed!
Just loosen and replace the Nut and it will easily change the look of the product.
It is Recommendation
View detail
KIJIMA Blinker Base Set
[How is it used?
busy
Was the one you received as per Image?
Rear Size did not fit.
Was the installation difficult?
I don't know because I asked Shop.
[Was there anything that disappointed you?
It is a Universal Product, but only the Rear could not be installed because it did not match the shape of the blinker hole.
View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25
It's cool.
I am very happy with the sequential flow, but one concern I have is that the blinker body is very thin compared to the other LED blinkers I have installed. Installation was easy. View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110PRO, HONDA SUPER CUB110, HONDA SUPER CUB 50PRO, HONDA SUPER CUB 50
Standard Custom
Handheld T10LED (Orange color) Purchased to make effective use of the
The Conversion Adapter is ready to be installed when it arrives.
View detail
Fits: HONDA CT125 CT110 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
Coupler is inaccurate and causes poor contact.
Coupler is inaccurate and causes poor contact. View detail
Bracket inside was bent.
When replacing the Tail lamps, the Cover was opened and changed to LED.
When I opened it, I found that the bracket that holds the Screw was bent, and when I tightened the Screw again, it did not fit.
I expect it to be a little more carefully crafted.
View detail
Fits: その他 , HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
Fashionable, but functional …
[How is it used?
I wanted a stylish small Headlight to install.
Was the one you received as per Image?
Smaller than expected.
Was the installation difficult?
Bracket and other devices are needed.
How was your experience with it?
Depending on the bulb, visibility is not very good.
It needs to be divided as Fashion.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
It is not recommended to use it as a headlight because it is small and not very bright.
View detail
Fits: HONDA REBEL250, HONDA REBEL500, HONDA Rebel300
Light is good, but the light holder is not fit to the fork
The light holder is not fit to the fork, too small fantastic light, not so hard to install. For DIY I used about 3 hours time to install, including demolitation of old turning night View detail
Conversion Code was defective. ( Nope.) Siksiksiks & hellip;
I went out for a test run, thinking that I was able to convert the blinker of the Type 3 Grom to LED, but it turned out that the Left Side blinker was not responding, and after a hasty search for the cause, I found that the attached Conversion Code was not energized.
I bought this product with high expectations and feel bad when I find out it is defective.
And how about the fact that the base of the Blinker insert is plastic molded?
When tightening, be careful not to tighten too vigorously as this may cause deformation.
If you have a budget to spare, we recommend the LED Blinker made by TAKEGAWA.
The base is made of aluminum molding and is solid.
View detail
Design is good, but …
[How is it used?
Small Type Blinker without changing OEM Image
Was the one you received as per Image?
Smaller than expected
Was the installation difficult?
Just disconnect the Wiring and reconnect it.
How was your experience with it?
Design is Large satisfactory, quality is …
[Included Parts:were they on?
None
[Was there anything that disappointed you?
The next day I looked at it and it was dull…
I heard a pushing sound while running, so I removed the Lens and found that the Fixing Screw on the Socket had come off.
Packing of Lens is difficult to fit properly (however, no problems have been observed after driving in the rain).
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Silver before installation [Color] If you don't paint it with Clear or polish it frequently, it will soon look bad…
It might be a good idea to retighten the screws on the socket (and screw lock if possible).
Rear was moved to the side of Number, but it was not long enough depending on how Wiring was installed, so it should have been longer by 10cm.
View detail
It's good, but a little expensive.
I bought it because I need it to install KIJIMA Nano Blinker
On the positive side, the texture is not bad, and it can be fine-tuned as far as the Bolt to which the Number is attached allows!
The bad thing is that I think it's a bit expensive.
I think this depends on the person, but I feel like it's a Level that I could totally make on my own.
I have a double-sided tape in the contents, but I thought I could just buy it at Home center.
View detail
To the embedded Blinker
It was larger than I expected. The thing itself is fine, my carelessness. I did not measure the dimensions. View detail
Fits: SUZUKI V-STROM650, SUZUKI V-STROM1000, SUZUKI SV650 , SUZUKI GSX-S1000
Wiring may have changed.
I installed this on my 2021 SV650X.
Because it is Blinker or Refreshing, and the attachmentAdapter is prepared, it is attached to Beauty very much.
ICRelay is a MicroRelay of Small Type, but it did not work.
I used a different ICRelay (DAYTONA) and it works fine.
Looking at other people's installation articles, the wiring is Blue and Brown, but the 2021 model is Blue, Brown + Red, so maybe the wiring is changing.
I'm happy with everything except ICRelay.
View detail