Reviews
This is not Black.
It was supposed to be called Black, but it is a dark Green color of OliveChromate. It is strange to call it Black. View detail
Flashing seen installation
I asked PRO from WebigPit in to install the Blinker set along with the MeterGuard, but the joint became governor only on the front side of the Left side. View detail
Correcting information.
I was able to purchase the product at a physical store and based on the information provided here.
2021 CB1100 (2BL-SC65) The mounting holes of Garnish did not match the shape of the mounting holes of Garnish, so it could not be installed.
Perhaps the shape of Garnish was changed during a past Model change.
The model year is 10-21, but it cannot be installed on the Second Type Model (2BL-SC65), and I think it will be an exclusive part for the First Model Type (EBL-SC65).
Products of the same Manufacturer before. (Pillion Bar) I would like to have reliable information posted on the website, as there was a similar listing error when I purchased the
View detail
It cannot carry out bolt-on to a pure blinker. The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad. First, it does not become useful, unless the lug which must n
It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.
View detail
Blinker relay for what?
I have LED Blinker but it did not function properly.
There should be no problem with the installation, but only the back of the Right Side is permanently lit, even though the Blinker is not activated.
Gold wasted.
View detail
Fits: SUZUKI GSX-R125 (Model AL8), SUZUKI GSX-R125 (Model XAL8), SUZUKI GSX-S125 (Model AL8), SUZUKI GSX-S125 (Model XAL8), SUZUKI gixxer gsx150 (model l7), SUZUKI gixxer gsx150 (model zl7), SUZUKI ADDRESS110UK110 (Model L5)
It's cool, though.
I bought it to tighten up the car body, but I don't think it's very good.
Visibility will be poor and two Blinker lenses Quantity:I think this price is high for Set.
good point
I think it looks good on the black body.
Replacement is easy.
A bad point
The visibility at night and in the rain is quite poor. I had some dangerous thoughts.
I can't deny that it's expensive.
The practicality of Smoke Type may have to be discarded to some extent because it is aimed at the dress-up effect.
But if you like it, you'll like it.
View detail
worst case scenario
I ordered it with BlinkerBody because it was written that it would be delivered within 5 days, but it was cancelled by itself saying that Blinker was out of stock, and only Bracket was delivered. View detail
It breaks off from the screw threaded part of the Screw.
There was one time it flew off while driving and I replaced it with another company's product.
I probably won't buy it again.
The video is FZr1000 love car introduction.
View detail
The texture is nice, but…
I installed it in my ZX-10R with Fender Eliminator. I am satisfied with the design, texture and light emission.
But when I ran in Circuit, the root was damaged. Fortunately, it did not fall off, but it was a close call.
Circuit use may be harsh, but it's not cheap Chinese food.
I think it is too poor for a product of this price to be damaged after one frame of driving.
View detail
Easy to install, but defective
I used it on my GSXS750.
I removed the Left cover and it's on the reverse side of the battery, so it was easy to replace it.
When the Side Stand is raised when it is put on, the Neutral lamp is left on and GEARIndicator becomes non-displayed.
I can't believe it's not working despite the fact that it says it's guaranteed to fit, is it defective?
I believed in the KIJIMA brand and bought it, but I am very disappointed.
View detail
worst case scenario
Product "Pin holes, but not scratches, etc notation The content should be informed before purchase It is your duty to include important details Also, there are many abrasive scratches and I asked for a return, but it was determined to be a pin hole They are scratches, although they are hard to see in the photos (photo 1) Are you a store that sells defective products by making them look like good products?
Also, the Clamp part is rickety; I've seen the WM Light Bracket, but The quality is a cloud of difference
You can't get this price for this quality
Please accept returns
View detail
worst case scenario
When you receive the goods "Pin holes, but not scratches, etc notation I want you to know before you buy it There are also many polishing scratches, and they are messy; the space between the clamping parts is rickety (photo 2) I've used Bracket, but the quality is far worse than that! I asked to return the product, but they claimed it was a pin hole Please see the real thing View detail
I would like you to state the description of whether it is a decorative item or a practical item.
Fog Lamp of this KIJIMA is a substitute that when it thought that it was cheap LEDFog Lamp and purchased it was a mere decorative item.
Since there was no description in the posting page of this product, a word "Because of accessories, there is no lighting capability" I want you to describe it.
Since we do not want to waste Case, HID / Whether it is not possible to effectively utilize LED Unit purchased separately.
View detail
It's different in color, it's cut off for less than a month
I usually write such reviews but I will post so bad.
Is it still cheap?.
Quantity for Position : 2pc. Purchase Set.
When it turns on after installation.... Hmm?
Package certainly Quantity : 2pc. Set and White, 1pc. Although it is certainly white color, another 1 pc. I am bleary.
Well, even if you use it as if you can not use it in terms of price, 4 / 25, 5 / 1 pc in 17. I'm out.
Meanwhile, I have only gone four times.
You can not eat it again..
View detail
[a Webike Monitor] -- -- even if it is replacement parts of this level, there is no stock in a shop front and it must order by a mail order specially. I am quite troubled by the weakness of a support system to the replacement parts of the
[a Webike Monitor] --
-- even if it is replacement parts of this level, there is no stock in a shop front and it must order by a mail order specially.
I am quite troubled by the weakness of a support system to the replacement parts of the
KIJIMA.
I think that this price is too high with the mere small parts made of a Rubber.
View detail
Before knowing, it had stopped lighting up, although purchased for Fender-less-izing of WR250R. Although the same thing was attached again, it became impossible to also use it in one week. a life is too brief although it is LED -- ! --
Before knowing, it had stopped lighting up, although purchased for Fender-less-izing of WR250R.
Although the same thing was attached again, it became impossible to also use it in one week.
a life is too brief although it is
LED -- ! -- I hope that you do not use this product with 2 times.
View detail
It cannot carry out bolt-on to a pure blinker. The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad. First, it does not become useful, unless the lug which must n
It cannot carry out bolt-on to a pure blinker.
The accuracy of processing had the strange form where two which will be bad and which was bought had the same form of a die, far from bad.
First, it does not become useful, unless the lug which must not be in the portion which touches the case of the lens circumference is missing from 2-mm40 mm in die length in thickness and deletes those with two place, and this.
In addition, the cylinder portion which screws in a screw thread and becomes a female screw does not accomplish the business which compares pure and presses down the end of a passive reflector short 3 mm.
If it thinks that this product is a pure type blinker to the last, and is a kind of the raw material which has the necessity for processing in attaching, I will think that it is satisfactory.
The lens of a right orange is purity and the left is a kijima blinker lens pure type.
Although I think that it is not understood since the lug is deleted, the difference in the die length of a cylinder portion should be understood.
View detail