Reviews
Empty Fork
Simple and effective equipment. An extension with mounted terminals, a bolt, instructions for use. This will be perfect for cleaning the fork. View detail
inconspicuous
I was a bit surprised at the price for such a bracket, but considering the time and effort required to find a substitute and the fit, it may be inexpensive.
The method of installation is up to you.
View detail
A quality low-profile blinker kit
The kit I purchased was well packaged and tailored for installation on a V-Strom 650. All parts appear to be good quality and ready for immediate installation on the bike. The kit includes wiring adapters to suit the bike (bullet connector to 2-pin Suzuki connector) and a new 7-pin LED blinker relay. Installation was easy for someone with moderate experience. Tools required: open-end wrenches (8~12mm), hex key wrenches (4~5mm), 10~12mm socket. The rear fender of the bike must be removed to access the wiring and remove the existing blinkers. Routing the wiring through the adapter plates, washer and nut requires patience and a delicate touch. Aside from that, it's a matter of securing connections with electrical tape and securing the wiring to the frame. The kit is quite bright and very visible, even during the daytime. The blinkers are all mounted on flexible stalks, so they should survive if the bike is dropped. Overall, I am very pleased with the purchase. View detail
Rare Other Brand Product for 6v
This is a Horn for 6V electrical equipment, which is now rare.
Since most of the vehicles have been manufactured for a long time, we recommend replacing them with OEM replacements.
View detail
Flashing relay
GSX-1000 L3 is installed.
Since Relay is in the Blue circle, it is easier to Rose Seat Cowl as much as possible, and since Relay itself has a protrusion to prevent it from falling out, Space is needed to knead it lightly with Minusetc.
Things are OEM same etc. and not so good or not so good.
View detail
It's best
Installation is so easy.
Just unplug the headlight and connect it to the blue service wire.
It fits perfectly with the Hunter Curve and has a good sense of unity.
The only downside is that it is not waterproof when it rains.
You need to quickly unplug the USB and close the lid.
It would be even more perfect if it was supplemented to make it waterproof even with USB installed.
thank you -------------------------------------------------- -------- Installation is so easy. Just unplug the headlight and connect it to the blue service wire. It fits perfectly with the Hunter Curve and has a good sense of unity. The only downside is that it is not waterproof when it rains. You need to quickly unplug the USB and close the lid. I think it would be even more perfect if it was supplemented to make it waterproof even when USB is installed. thank you Powered by Google Translator
View detail
Kijima ACC branch harness kit
I haven't installed it yet, but it's good because the quality of the product and the product are excellent. I'll use it well. Thank you for the meticulous packaging and sending. View detail
Very happy with purchase
Bought this as a north American buyer, received the item 4 days later, perfect packaging. The light diameter is the same as the OEM on the Yamaha XSR900. Very please with the quality of the product. View detail
Particularly good for places where there is a lot of ROSS
Reusable Tie Wrap for easy removal.
It is especially effective for parts that are frequently removed and attached. It is a little thicker than regular tie wrap, so be careful, but I use it to tie parts that are often removed when disassembling.
Off-road motorcycles are especially used for this purpose.
The thicker the wire, the sturdier it is, so there is no need to worry too much. However, if you cut the extra length, you can only use the same length or a shorter portion.
View detail
The ability to release as intended is still an advantage.
Vehicles used in Races and competitions are often cleared.
If Tie Wrap can be Released in such cases, it can be used once more.
This is important.
But it's not cosmetic. Definitely.
But they are SDGs. Because they can be reused.
Even if you are not a "good" person, you don't have to use a nipper to cut it, so you don't have to choose a place for it. It is surprisingly possible even in a gap where tools cannot fit.
View detail
Sense of security.
If you are looking for a Square type, this is the one you should choose.
I personally think that this is the best choice in terms of tightness, design, and quality. I can feel that each item has been inspected one by one, which gives me a sense of security.
I am very happy with the Large size.
View detail
MONKEYTachometer out-of-lighting measures
The lighting bulb of Takex Tachometer, which was installed in MONKEY, went out, so we installed KIJIMA's lighting bulb as a Universal Product, and it worked fine.
We will fit the product with confidence, so please use it as a reference!
View detail
Excellent visibility.
As expected from a first-class manufacturer. The quality is excellent, and is not as good as some cheap blinkers. The price is high, but that's all there is to it. If the car body side can use Bullet Type Terminal as it is, there is no problem, but if Coupler is used, modification is required. The luminous intensity is also high.
It is outstanding and highly visible.
View detail
BANDIT1200 2006 F/E used for LED conversion
I used BANDIT1200 FE Blinker LEDs and the only LED Bulb I used was JAPAN's Matsu Stripe. The price may be higher than Chinese products, but it is an old car and I thought it would be troublesome if I found a defective Chinese product, so I decided to go for peace of mind.
Front Blinker Valve Maz Stripe L820D OR
Rear Blinker Valve Mazda Stripe L820S OR
Tail lamp and License Plate Light have also been converted to LED.
Tail lamp bulb Maz Stripe L820D RE
License Plate LightValve Maz Stripe L742H
Relay can be accessed by loosening and removing the Left Side Cover with a single hex.
Tail lamp is located deep inside the cowl, so it was a little bit of a hassle to reattach it, but no problem.
BANDIT1250S Motorcycle Travel's blog was used as a reference. Thank you very much.
https://819oba3.com/bikelife/led-lights-bulbs/
*I was too lazy to look it up, so I looked at the blog and ordered the same thing without thinking w
View detail
Stylish with no sense of retrofitting
I had been thinking of converting Blinker to LED for a while and decided to do it since I could afford Gold.
The shape &Quality of the product is fine.
I had planned to install it quickly and finish it quickly, but there was an unexpected pitfall....
The installation itself can be done in two hours, both front and rear.
However, it does not work properly just by installing it normally.
I did an operation TEST and all 4 of the front and rear ones blinked at the same time and went into Hazard state.
I checked to see if I had made a mistake with Wiring, but no problem.
When this happens, the suspicion is often that some special processing is required.
Net, I found that by setting up a rectification diode in the wiring of the blinker indicator in the Meter, the rectification diode can be used.
We were informed that the problem is going to be solved.
I heard that they also sell a Wiring Kit for it, so I bought one at a local mass retailer.
I did a full Rose of Cowl and took out the Meter unit and did the Wiring process and it worked fine.
I had no prior knowledge of the replacement work, so I struggled with unexpected pitfalls....
If you are going to do DIY installation work, do a lot of research before you do it.
View detail
Fits: HONDA CT125 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB
It has a lot of stuff around the front, so ….
Since there are many things around the front, I prepared long bolts for the front carrier and windshield respectively, and was able to install the wiring without opening the headlight. View detail
Excellent cosmetic Headlight
I have a TOWN MATE 90 with a front basket, and I had a headlight installed in front of the basket, but it was damaged and needed to be replaced, so I was looking for a good replacement and found this one. The simple construction makes it very universal, and I think anyone who is familiar with the work can attach it in any way they like. The price is very low for a similar headlight, which I think is a big plus. View detail
For Stock
I have already purchased this product last time and bought it for Stock.
It's for old Custom parts,
In the countryside, items are difficult to obtain.
Thanks.
View detail
Small but bright!
Small, not sure if it's on or not, Parenthesis is good!
Japanese Vehicle Inspection Correspondence and brightness is perfect!
The wire coming out of the Body is very thin, so be careful when installing it.
I was on edge because it looked like it was going to come off.
View detail
Switch
Refreshing fits in handlebar and looks good View detail