Reviews
Fits: HONDA DAX125, HONDA MONKEY125
Is it essential in modern times?
Good product
When you live a life where your phone is indispensable, battery is always a concern.
The USB port gives me a sense of security.
If you read the Instruction Manual carefully, I think it is gentle as a work S-Kill.
However, it is necessary to pay attention to the removal and installation of the light cover (plating parts) and the fit of the wiring.
View detail
DL1000 V-STROM800 used for power extraction under Seat
The DL1000 V-STROM800 has an OEMOption to install a 12VCigar lighter socket under the Rear Sets. The Attachment power supply Wiring for this purpose comes to the position shown in the photo. If you use KIJIMA's ACC Branch Harness that you purchased, you can get the power supply in Couplet-on. However, please note that the +- terminals are reversed, so the terminals need to be replaced. This is recommended for those who do not want to damage the existing Wiring. View detail
ITType." What does that mean, Italy?
I wanted to change to a Tail lamp with an integrated License Plate Light. I could have chosen anything, but since the car I was installing it on is an old ItalianRacer, I looked for a design that would not ruin the atmosphere and decided on this one.
I think KIJIMA is the best because the valve is sold separately, but it is a product of a well-known manufacturer, inexpensive, and easily available, and KIJIMA also supplies small repair parts such as lenses and rubber base parts. KIJIMA and Tail lamps are strong for classic vehicles.
Personally, I am disappointed only in the Fixing Screw, which is too small, and the Nut and Washer are too small to work with, and the originally drilled holes are too large in diameter. If you are going to drill a hole in a cowl, I don't think M3 or M5 will make any difference.
The base of the Rubber has a fairly solid thickness, and these points are very favorable.
Although there are only three wings, a WiringMemo is included, and it is also designed with the beginner in mind.
View detail
Fits: SUZUKI GSX-S125, SUZUKI GIXXER 250, SUZUKI GIXXER SF250, SUZUKI GSX-R125, SUZUKI GIXXER 150, SUZUKI V-Strom250 SX
Extension Harness Min.
Quantity of 1 Set for 1 Vehicle to install TRL2Blinker:Set.
TRL2 LED Blinker*4
Mount for TRL2*4
Extension Harness (long)*2
Extension Harness (short)*2
MicroIC Blinker Relay*1
Small and very Stylish
The mounting is done by sandwiching the Mount with the Plate, and since the hole is small, the Bullet Type Terminal is inserted while shifting it slightly.
The price is almost the same if you buy them individually, but you save money for the Extension Harness.
The included MicroIC Blinker Relay is about the size of a small finger, so you should have no trouble finding a place to place it, but the terminals are bare, so be careful not to touch the Gold Genus.
View detail
I am satisfied
Degrease the body side and the back of the rim, and use the supplied double-sided tape.
Just paste three places.
I'm a little concerned about adhesion because of the cold weather.
Warm it up with a heat gun, etc., and then use masking tape.
It would be good to hold it down and take a curing period.
The two holes were placed down.
Originally, the current OEMLight shines because the Rim is transparent.
I don't know exactly what the difference is, but I've been using Plating for the other Parts.
I am personally satisfied because I want to unify the two.
It is easier to understand than the Blinker Rim.
View detail
I am satisfied
Degrease the body side and the back of the rim, and use the supplied double-sided tape.
Was it four places? Just stick it on.
Like Headlight, I am a little concerned about the adhesive strength.
I would warm it up and cure it with Tape or change the Double-sided Tape.
The fitting was good and I am satisfied with the product itself.
View detail
Mounted on CD50
Used in CD50 head lamp relocation.
The Clamp can be split and mounted without removing the Fork from the Bridge.
The included Rubber plate can be used for 27mm thin Tubes.
Rubber and gold plates are attached to the square PRESS part of the bracket with double-sided tape, but they were peeled off when they arrived.
I am able to use it without any problem.
However, because of this structure, if a blinker is attached here, the rubber and gold plates tend to shift when the angle is adjusted.
View detail
Refreshing fit in Handlebar.
I asked PRO to put it on, but it seems that I need to be creative with the wiring, so they connected it in a way that does not put a load on the Battery.
It fits nicely in the Handlebar and looks good.
View detail
This is a review of the headlight rim.
When installing, it is installed on top of the original rim. Suitable for CT125. It is a 3m tape fixation type, so please replenish it enough before installation.
It's a minor tuning, but those who recognize the CT125 will immediately recognize the small change.
I think the price is reasonable too. It would also be a good idea to be careful in case of rain. I think it would be better to install the headlight guard on top of the rim after installing it.
Recommended! -------------------------------------------------- -------- It is a structure installed on the pure rim when installing. Suitable for CT125. 3M tape is fixed and please supplement it more enough. It's a trivial tuning, but if you look at CT125, you can find out at a small change. I think the price is also appropriate. It would be nice to be careful about rainy weather. After installing the rim, it would be better to install the headlight guard on top of it. Recommended! Powered by Google Translator
View detail
Although the shape is different from those made by Ekimon, Yaoki, and others.
The Crimp section has not been modified in any way, such as being slightly folded from the beginning, so it is a little troublesome to Crimp with Electric Works Pliers, but it is good for Crimping several thick or thin Cables at once.
In addition, the sleeves for waterproof and insulation are a little thicker than those of the Title companies, but there were no particular problems when they were mixed with those made by those companies.
View detail
This is a purchase review.
Usually, many people decorate the front part by using a front carrier / ambulance / headlight protection device.
However, for those who don't use it for og looks or off-roading, I think a simple headlight replacement can be a big help in changing their image.
The price is expensive. I will have to use it more and decide whether it will rust due to water. -------------------------------------------------- -------- Usually, many people are decorated by using the front career / ambulance / headlight protection mechanism. However, for those who do not use OG or off-road, I think it is a great help to change the image by replacing simple headlights. The price is expensive. I should try more and judge if it is not rusted by water. Powered by Google Translator
View detail
Fits: その他 , HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Universal
This Size is safe for vehicle inspection!
I purchased this Headlight to pass the inspection for my Shovel head 77.
I also purchased a 4.5-inches Bates Headlight made by DAYTONA at the same time, but the sizes are quite different. (*Left in the comparison image is DAYTONA 4.5-inches and Right is this product 6Inch)
If you are serious about passing the inspection, I think this Headlight with H4 Valve is safer.
It also has a high beam indicator, so it is easy to see when the high beam is lit.
The Indicator and High beam wiring are processed as one from the beginning, which makes installation even easier.
I did not use it, but it comes with a conversion coupler, so I think it can be installed on various types of cars.
The light intensity is excellent, so I think I can take on the car inspection with confidence.
View detail
Plus minus needs to be replaced in reverse for GSX1300R HAYABUSA
Precision Driver is required to shift the rubber packing→push down the gold part→replace the Plus minus→and restore the current state. View detail
Sufficient brightness
I recently replaced the KOSO T&TMulti-function Meter with a KOSO T&TMulti-function Meter, but the Indicator in the Meter only had one warning Lamp, so I purchased a cheap LED Indicator to install for the Oil Warning Light, but it was not bright enough and I could not see it during the day. I tried to light it in the test and this Lamp is bright enough and I can see well in the daytime. It is a warning light, so it is best if it does not come on, but if it does, it is still visible. View detail
Fog Lamp Kit diverted and installed
There is also a Single Item available, but I used Rebel's kit and installed it on my XMAX because it was a good price including the Harness and switches. I did not use the included bracket.
Lamp Light Distribution Narrow Up and DownQuantity:Pair (for Left and Right) The design is friendly to oncoming traffic. It would have been better if the underside was wider.
The brightness is dimmer than other 10W super Lamps, but I felt it was sufficient for my needs. It is suitable for vehicles that do not have enough power generation capacity.
Since it is not a dedicated car model, the wiring length to the Lamp is not long enough, depending on the installation location, so it is extended.
I like that the size is compact.
View detail
Small and cheerful anyway.
It's expensive, but it's brighter and looks nicer anyway.
I think it is better to leave it to the Shop, because it is a strange work to remove the Fender and Large!
View detail
IndicatorLEDBlue
Purchased because I added Indicator
I purchased the Blue color and the color is very bright and shines brightly.
Merit has a resistor in it that allows for easy installation, even when plugged directly into a 12V outlet.
View detail
m10x1.25のネジナットに使用しています。用途に応じて色々な用途に使えます。丈夫です。 View detail
Used for Super Cub custom
It is just the right Size and when lit when Brake is applied, it is easy to see the rear car. View detail
4 amps, 2 mouthfuls.
My first impression is that it is huge. My first impression is that it is huge.
Since the special harness is sold separately, installation was easy.
It is not a dedicated kit, so it is necessary to cut the wiring. However, it can be fixed to a handlebar, so it is an advantage to be able to adjust the length. I think it is an advantage.
I usually use a cheap Chinese ActionCamera all the time in place of a driver's recorder.
I haven't tried charging Portable navigator yet, so I don't know.
It seems possible to only charge the phone (Pixel 6a).
I don't know how it works with the constant use of the Navigation app, as I haven't tried it.
It seems to be turned ON-OFF with Cap, but I don't know how it works.
For now, … I think it's a good thing to say. Personally, I think it's a good idea.
View detail