Reviews
Upside down is correct.
I installed it on the front fork of my 33Φs because the Steel OEM was corroded, and I wanted to lower the position of the headlight, so I installed it upside down. The low silhouette is so cool, and the CIBIE headlight is a perfect match with it. View detail
Corrosion.
Since it is plating, it will corrode after use, so it needs to be rusted off and repainted. The strength and usability are not bad, so I would like to see the product made of Stainless Steel if possible. View detail
I bought it because KIJIMA.
The paint on the button is rough and has a clicky, squishy feel to it. Also, I don't think it is waterproof. View detail
Usb port
Found exactly what I needed for the bike and the price plus shipping was better than what I could have gotten locally, thanks for the fast shipping will be ordering again!! View detail
KIJIMALoading Rack Nut
KIJIMA Loading Rack Nut installed!
Just loosen and replace the Nut and it will easily change the look of the product.
It is Recommendation
View detail
Easy to read, solid Indicator
Purchased to rebuild a meter panel I had made myself. I bought it to rebuild a meter panel that I had made myself.:There was a cheap one in 1 Set of 5pcs. but I bought Rose made by KIJIMA because I was told that I could not add Orange 1pc.
Compared to the previous one I bought at an electric parts store in town, it is more solidly built and holds up nicely.
The Wiring is long enough and the edges are nicely processed. The wire is RedBlack no matter what color the light emitting color is, but the root of the wiring (Body side) The luminescent color markings on the "+" and "-" are easy to see without problems.
The LEDs are quite glaring when viewed directly, so it is better to install them at a slight angle to avoid direct viewing when using a motorcycle.
View detail
Small giant (laughs)
Compared to the Kellerman, it is square in shape, so I bought it thinking it would fit in with the Off car.
However, I struggled with the thinness of Wiring and the mounting Bolt size from BlinkerBody.
I modified a M10 bolt and attached the blinker to the bolt to prevent damage from overtorque and to use it as a bracket. (If you tighten it with a torque like Gold Parts, it will probably be broken soon. The attached nut is made of resin.)
The wiring is also very thin, so it is reinforced with Heat Shrink Tubes and the terminals are compatible with OEM couplers. (Electric Works Pliers for ultrafine wires are required.)
The luminescence is more explosive than expected, and although it is hard to tell where the Body is at a distance of 2 meters, the visibility of the luminescence is incomparable to that of a Lamp bulb.
High flasher measures were taken by installing ICRelay at the same time as the Blinker.
As the original is a Competition Machine, I am very satisfied with the style of the machine, which is very close to the original style with the small security parts.
View detail
It can be used normally
It was rather expensive, but I needed it, so I bought it. View detail
KIJIMA Blinker Base Set
[How is it used?
busy
Was the one you received as per Image?
Rear Size did not fit.
Was the installation difficult?
I don't know because I asked Shop.
[Was there anything that disappointed you?
It is a Universal Product, but only the Rear could not be installed because it did not match the shape of the blinker hole.
View detail
KIJIMA Blinker lamp NanoSingle LED
[How is it used?
busy
Was the one you received as per Image?
It was just as Image.
Was the installation difficult?
I don't know since I asked the Shop to do it, but the Blinker wiring is quite thin, so I think I have to be careful not to break the wire while working on it.
How was your experience with it?
The Blinker became less noticeable as intended, and the Motorcycle became very Refreshing.
[Included Parts:were they on?
A Nut and Heat Shrink Tube for installation and Instruction Manual for handling were included.
[Was there anything that disappointed you?
There was none.
Other items that would be helpful
Items to buy together
The blinker itself is quite small, so the OEM blinker mounting holes are too large to accommodate the blinker.
View detail
Good visibility with good parenthesis. No regrets buying it!
At first, I wanted to change to the Type Blinker that flows, but after reading reviews on various sites, I found that "the last Quantity of LEDs:2pc. I can't get a Set anymore." It just stopped working. I was concerned about the durability of this type of Blinker when I saw comments saying that it was not worth the price. At that time, I found this product, which is specially designed for Grom. It is not a flowing type, but its structure is simple and I don't think I have to worry about trouble. The area is smaller than OEM, but it is very bright and visible. It is not cheap, but it is not expensive since the LED conversion Relay is also included in the kit. Highly recommended! View detail
Fits: YAMAHA MT-03, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25
It's cool.
I am very happy with the sequential flow, but one concern I have is that the blinker body is very thin compared to the other LED blinkers I have installed. Installation was easy. View detail
BlinkerSmoked lens
Swap from NORMAL Orange blinker lenses to Smoked lenses to create a Black and Sharp Image. View detail
KIJIMA KIJIMA Self-wrap Sleeve
[How is it used?
Dress-up Wiring in Quick shifter.
Was the one you received as per Image?
As per Image
Was the installation difficult?
It is easy just to wrap it around. Can be cut with Scissors to any desired length.
How was your experience with it?
It was a bit Race ish.
[Included Parts:were they on?
nothing special
[Was there anything that disappointed you?
nothing special
View detail
Blinker Conversion Harness
Purchased along with LED Blinker for z900rs. If possible, it would be even better to have the same Coupler as the OEM. View detail
Fits: KAWASAKI ZRX1200DAEG, KAWASAKI Z900RSCAFE, KAWASAKI Z900RS, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z250, KAWASAKI Z1000, KAWASAKI Versys650, KAWASAKI Versys650, KAWASAKI Versys-X250, KAWASAKI Versys-X250, KAWASAKI Versys 1000, KAWASAKI Ninja400R, KAWASAKI Ninja400R, KAWASAKI Ninja1000, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja 650R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja 650
GOOD Blinker Base SetQuantity:Set
I used it on my z900rs, and it is compatible with M10, so I did not feel any tightness. The ribs are a little small, so it is a little troublesome to align them, but it is easy to work with if you temporarily fix them with curing tape or something. View detail
Fits: SUZUKI V-STROM650, SUZUKI V-STROM1000, SUZUKI SV650 , SUZUKI GSX-S1000
Blinker with blotchy Refreshing
The kit is complete and easy to install. I am very satisfied with the bright and energy saving LEDs that look so refreshing.
As a precaution, when connecting the conversion coupler from the BlinkerBody, the Red and Black wires must be connected in the same way. If you make a mistake, the Blinker will not turn on because of the LED. (I made a mistake.) Also, the ICRelay is very small. Also, the ICRelay is quite small and is not a coupler like the OEM Relay, but a type that is directly inserted.
The 1000F had plenty of room for Wiring both Front and Rear (which is a Fender Eliminator).
View detail
When installed, it increases the presence around the Meter.
Was the one you received as per Image? The Large size and texture were exactly as shown in the Image.
Was the installation difficult? I referred to the previous posters who posted their impressions. I was able to install it successfully after curing the Meter especially well to prevent damage. It may be a little difficult to install, but Large is sturdy! It can be attached.
How was your experience with it? The construction is solid and does not wobble.
[Was there anything that disappointed you? If I wanted, Luster erasing would have suited my taste....
View detail
Small, unobtrusive, and good to be able to MonitorRing the battery status.
[How is it used?
Mounted on a ZX6R 2023. For charging your phone or Lap timer.
Was the installation difficult?
The ZX6R G-type has an Attachment power supply under the Right inner cowl.
There is a BlueWhite + side and a BlackYellow Earth side inside the Waterproof Rubber cover along with a RightBlinker Connector.
Once the Bullet Terminal processing of this product is complete, it is easy and convenient to install by simply inserting the terminal.
The problem is where to put the USB port. ZX6R has no space around the handlebar. I mounted it on the SIDE of the Ram Air Duct, which is fixed with Magic tape so it is easy to remove.
Most people would install the Multi Bar and attach the insert there, but I had a hard time because I don't like clutter around the Handlebar and didn't want to install the Multi Bar.
The picture of the product does not show a Bullet Type Terminal, but in reality, for some reason, a Male Terminal was attached to Both Sides.
【good point】
It is good that it is Compact and unobtrusive. It also has a Lamp that tells the battery status, so it can be used as a simple voltmeter.
Anyway, it is a recommendation for those who do not want to put anything conspicuous around the Handlebar.
[Bad point]
It is unusually hard to insert the USB port into the slot. I don't know if it is made hard so that it won't come out while driving, but it would be easier to use if it were a little easier to insert.
Minus the slightly higher price.
It also has one port, so it is not convenient for those who charge various things or use Grip heater.
View detail
High flash fixed!
Blinker remains on or in high flash, suspecting a blinker relay failure, and replace this product.
It is pleasantly revived.
As indicated, it is used with a 10w Blinker.
The vehicle is a CT110 that has been converted to 12v.
View detail