Reviews
cheap but quite good
I use Kijima tank pad on my Honda VFR800 VTEC gen 6 2003. Kijima tank pad is a bit cheap, small size but quite good. I think it fits very well. View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, KAWASAKI ZRX1200, HONDA XR650L, HONDA XR250L, HONDA CB1300 SUPER FOUR, その他 , YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Atmosphere first, but practical.
I used it on my SR400 and it is just the right thickness.
Since the adhesive tape provided with the product is weakened by heat, it is recommended to cut a slit in the PadBody portion that touches curved surfaces with a cutter in advance.
View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, KAWASAKI ZRX1200, HONDA XR650L, HONDA XR250L, HONDA CB1300 SUPER FOUR, その他 , YAMAHA SR500, YAMAHA SR500, YAMAHA SR500, YAMAHA SR400, YAMAHA SR400
Good texture and good grips.
[How is it used?
I was looking for a tank pad to add some thickness to my ESTRELLA tank because it tends to slip when I grip it by the knee, and also because the tank itself is thin. I was looking for a product with a more relaxed shape than the design pad used for the Sports Type, and I found this product.
Was the one you received as per Image?
The design is as shown in the image, but the shade of brown is lighter than expected.
Was the installation difficult?
The pad itself is simply attached to the tank with double-sided tape, but since the double-sided tape and pad are included separately, you need to attach the pad yourself.
Degrease the Tank during installation.
How was your experience with it?
The Tank Pad seemed to grip from the feel of it, but when I used it, it gripped well. Also, the thickness of the tank pad makes the tank a little wider, and the knee grip itself is easier.
The shape of the pad matches that of the Tank, so it does not look out of place in terms of design, but the color of the pad is different from the Tank's Brown, which makes it look a bit conspicuous.
[Included Parts:were they on?
Simply attach with the included Double-sided Tape.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It can be used normally
It is a Universal Product, so there is nothing special about it.
I don't know about durability, but the texture itself is good.
I have the impression that there are no particular problems with the tightness.
View detail
Less slippery.
I stuck it on my CB223S.
My knees were slipping during Brake, but now they are less slippery.
Quantity because it was too appropriate at the time of pasting.:Pair (for Left and Right) The effect range was reduced when the position was shifted in Rear Sets and the effect range was reduced when Rear Sets were used.
If you want to tweak things, it would be safer to put it on later.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Focus on appearance
The knee is less likely to slip, even though it is a
Knee grip is also easier to get right.
If you accidentally spill and drip Fuel1, etc.
Wipe it off immediately or you'll get sticky Tape.
Be careful, it will come off. to Service station
There was no dustcloth, and I couldn't wipe it off even if I wanted to.
The diagonal has lost a little stickiness…
We have similar products in Thin Brown.
Depending on the color of the car, it may be better for you.
It might be stylish.
View detail
Required for Mini bike
There is a subtle bump on the side of the Tank on the Z125pro.
I was wondering if there is anything we can do about the interference with the Pants knee pad? I was wondering if there was any way to fix it.
I tried to temporarily attach it, but this time I was concerned about the difference between the pad and rubber of the Moto pan.
As a result, the KIJIMA Tank Pad is used for the rearmost to forward phases of the Tank, and the
10mm thick Neoprene rubber (Foam Rubber) was spliced and extended.
This eliminates the problem of lateral knee movement during the Corner ring.
As for the seam, I guess it can't be helped that the escape of pasting on the curved surface is removed and that it is not visible while driving.
Eventually, it's going to be in the joints. Stripe" But I'll put it in and dress-up.
View detail
Fits: HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1100, HONDA CB1300 SUPER FOUR, HONDA XR650L, HONDA XR250L, KAWASAKI ZRX1200, その他 , KAWASAKI Zephyr 750 RS, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, HONDA CB400SB
Glad I put it on early.
It is cheap and effective multi-large.
Color:I chose Gray, but I wish it was a darker color.
Satisfied with the ease of maintaining position when decelerating.
The non-slip effect is stronger than expected, and there is some resistance when moving the Left foot to change GEAR.
Well, once you get used to it, it's not a problem.
Also, the Pad came with Double-sided Tape, but the back and front sides had different adhesives.
...Maybe I used the opposite.
I'd hate to have a problem when it comes time to peel it off.
View detail
Necessary and sufficient.
The smallest material, size and shape necessary to prevent tank damage.
It may be valuable in a world of excessive and flashy Tank Pad. It is also inexpensive.
This is the third time I have purchased this product, and while it is easy to apply, it is a challenge to remove the old one.
Although the work was done in the summer, the urethane portion deteriorated and could not be removed all at once.
It's a Fuel Tank, so it can't be heated with a heat gun.
To avoid scratching, Plexus is soaked into the urethane part and carefully stripped off, and then the urethane is removed.
Paste residue was removed with Silicon-off.
It is better to cure the Urethane so that no pieces of Urethane fall into the Air cleaner.
If it is immediately after a new one is applied, it is relatively easy to reapply (peel off).
The picture on the Product Page is old and hard to understand, so I'll post a picture.
View detail
I used Magnet Sheet.
I didn't use the double-sided adhesive seat that came with the car, but I tried the strong magnet sheet of Kojo that someone reviewed. It is a very good thing to be able to remove it easily, but because it shifts after all while driving on the road where winding, especially Tight corner is continuous, I change it to the adhesive Seat straightforwardly. The pad itself is thick and has a good grip. The appearance is suitable for VTR. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Wound concealment of the Knee grip of the Black Tank.
I bought this to hide the knee grip part of the tank on my ZrX1200 DAEG, and it was a good decision to put this on because the knee grip part of the tank is black and the abrasion is easily noticeable. I'm not sure if this is the right product for you, but if you want to use it on other models, you'll need to make sure it matches the shape of your tank. Also, the double-sided tape that comes with this product is very strong.:Pair (for Left and Right) If you don't match the position of the paste firmly, it is Large strange (sweat).:Pair (for Left and Right) position Gap, but I compromised! (Lol) View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Use Magnet Sheet instead of Double-sided Tape
Instead of Double-sided Tape, I used a strong Magnet Sheet with single-sided adhesive, bought at Monotaro.
Now you can remove it freely & it won't damage the tank. The adhesive strength is enough, no problem.
Recommended for those who use steel tanks.
However, even if you put this on the TS185ER Tank, it is too thin to grip the knee.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
It's hard to divert anything other than SR.
It was exclusive to the SR. The shape is ExactlyFit to the SR's DropTank, and there is nothing that can't be attached to the SR's DropTank, but it is awkward.
If you're on a Minor vehicle that doesn't have a special product available, I think it's better to turn off the Stomp Grip.
You can't complain if you use it for SR.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
There is a Large difference between having and not having
After waxing and wearing slippery over pants, I couldn't find the right position to put the tank in, but after installing it, it's stable.
I had a hard time attaching it to my BANDIT250, but I turned it over and attached it to my car.
Make sure you degrease the car before installation
I've got about 1000k miles on it and it hasn't come off after touring and commuting.
View detail
It's a little small
Large size is about 120mm×80mm
The basic shape and cutting is beautiful, and it fits all kinds of cars, especially old cars
But this one is a bit pricey at $800
View detail
I like this kind of thing
I bought it a long time ago as I had it on my CBR, but it's now on my motorcycle I cut and pasted only the middle one because it didn't fit the shape of the tank somehow There may be many people who think it doesn't look good, but I like this kind of design
It's been a few years since it was installed and the powder has started to fall off due to deterioration, so I'm thinking it's time to replace it
View detail
As long as you don't make a mistake the first time, you're good to go
The tank is slippery and round, and I have been dissatisfied with the knee grip in the mountains and in the circuit I bought it because it was there
It's a 90s Motorcycle so it doesn't look that different I cut the edge of the bike, but it's not easy to cut with Scissors because it's stuck on the adhesive part Notes It's been almost half a year since I put it on, and I've driven in the rain a few times, but the adhesive strength does not decrease However, I need to find a way to prevent dust and sand from accumulating in the gaps between the attached surfaces It might be a good idea
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Parenthesis is good!
When I replaced the tank of SR with the old Narrow Tank, the knee grip was difficult to do So I put this on
It's cheap and I didn't mind if it wasn't good enough, but it fits my knees very well and I can ride with confidence
It looks like an old car and is good for Parenthesis
It's best to wear Motorcycle shoes or Boots when installing it to match the height of the bike Good
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Happy to be free from the cold of winter
I'm happy to be out of the winter chill
I think the SR400 Tank is slimmer and the fact that it's easier to knee grip is a good thing I am satisfied with the appearance of the accent Everyone says that the double-sided tape is strong, but if it is light, it can be reapplied I can do it, and I've got one shot to match it! I think you don't need to be enthusiastic like that It's easy to do, and I think it's highly effective custom
View detail
It is a product that seems to be good to buy.
Because the Tank color is Red, I thought it might fit, so I bought it.
Thickness and texture were also good, and it was possible to stick securely to the place where you want to stick the bonded surface of the attached double-sided tape without problems. Just do not change it so it is good to work out the temporary position.
You can also feel good with the touch feeling good Hold. What is the durability performance of Rubber afterwards. Considering the price, practicality, I think both Dress-up good products!
View detail