Reviews
Simultaneously with KITACO made Fender Eliminator Kit
I decided to buy it by looking at various Net and saying that it can be installed simultaneously with KITACO made Fender Eliminator Kit.
The purpose is to attach a box.
I think the performance is good because the loadable range is 5 kg enough.
It took a while to install because it was installed simultaneously with Fender Eliminator Kit,
Accuracy and Instruction Manual were enough so we could cleanly install it.
I put it on, I removed the Black plastic on top of the Stop lamp and could not be installed,
Plastic could be installed with a little processing.
If there is no Plastic, it seems that there is free rainwater between Carrier and Blinker?
I thought that the direction to install putting explanation of processing etc if possible is good.
View detail
Is it the strongest in Carrier that can be attached to the D-Tiger 125?
【What made you decide the purchase?】 Because it was the most robust construction among the carriers that can be attached to the D-Tiger 125. Also, there was an impression that it was unnecessary to cut Side cowl.
【How was it actually used?】 Since the mounting Bolt 4 points are in the right position, it is fixed and Firmly fixed, the construction of the Carrier itself is also solid. Hunter × WorldWalk's 32 liter Box was put on, but it is also compatible with fixed Bolt with Carrier attached to Box. For this point I will attach an image so please check it.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Bolt hole accuracy is also good, so there is no difficult point.
[Is there anything I was disappointed about?] None.
【Hope for Manufacturer - Please tell me if there are any improvement points】 None.
View detail
Easy to install, satisfied with just good Large.
Pick up KIJIMA's Carrier because there is no Hook when transferring packages from Grom to Z125. It was easy to install in about 30 minutes with an intelligent instruction manual with a picture even for a clumsy clothes. It's a solid feeling for Bolt-on's pinging.. It is a good Large Kimono to load a little baggage.
However, I wish the price was a bit cheaper!
View detail
I should have bought at the same time when purchasing a vehicle - -
VTR250 (MC33) It attached to. When purchasing a vehicle, already with Club bar "This is fine" I thought, but I strongly felt the necessity of Carrier with Touring I went to GW, so it is cheap and reliable Brand's KIJIMA - I chose Rear Carrier. Unlike the dazzling Carrier like CUB, I think that it is Simple Design while maintaining the necessary minimum strength. It is just fine to load a Box of about 30 L.
I would like to upload the attached photo, but our smartphone can not be uploaded for iPhone - - -.
View detail
The bend is disturbing.
Since Rear is bent, there are Parenthesis, but it is hard to add a Rear box.
If it is attached as it is, the fixed pla of the Rear box will bend and it is likely to be damaged.
So I dropped the plastic cutting board of about 8 millimeter thick which I bought at Home center in the place I got down and pinched it.
However, since it is supported by three points compared to other manufacturers, is it easy to distribute the load?
Painting is easy to peel. (We repair by odds with Body pen)
View detail
I installed it in a good feeling!
There was neither twist nor paint was beautiful.
If you want a greedy manual, I think that you can attach it more easily.
The installation time was about 30 minutes.
Packing was polite as well from order to delivery.
I will try again if there is opportunity.
View detail
Carrier expansion
Originally there was no hook in the car body
Passenger seat also has a narrow width so SeatBack
It was Large fun to install
It is now easier to put a little on this.
It's pretty useful
View detail
Firmly
Because it is a split type, I was concerned about the strength somewhat, but it is pretty solid.
When installing, the position of the hole was Large sturdy, but the width of the part to be tightened with Seat did not fit, and it was hard to spread.
View detail
Rear Carrier for VANVAN
I made it from KIJIMA made by cheap price because it looks like exactly the same product as I worried about making it by KIJIMA or Auto Remesa.
The maximum Large load amount is 3 kg in the explanatory note, but it is 5 kg mistake.
With regard to mounting it was possible to install with Bolt-on without any problem.
View detail
About mounting process
There is an Instruction Manual with a photograph, and it took about 1 hour in accordance with the procedure. However, in the Instruction Manual, there was a drilling of 25 mm, but Large rinse. According to the size, 16 mm is also Just size from Bolt size. View detail
Many thanks for the article! Planning a long trip without a boot would be very bad ... Came up perfectly. Installation spent about 20 minutes. Written that the maximum load of 3 kg but I think it easily withstand 10!
Many thanks for the article! Planning a long trip without a boot would be very bad ... Came up perfectly. Installation spent about 20 minutes. Written that the maximum load of 3 kg but I think it easily withstand 10! View detail
It purchases in order to transfer the Rear box attached to VTR250.When also doing attachment as the description, it was not so difficult work. Since a Screw stop is carried out strongly, there is also no shakiness at the time of a run.It is a
It purchases in order to transfer the Rear box attached to VTR250.When also doing
attachment as the description, it was not so difficult work.
Since a Screw stop is carried out strongly, there is also no shakiness at the time of a run.It is also good not to crush a backseat.
I think that the Rear carrier should certainly be attached unless even a Race private car is used since off-road one/MOTARD has no loading nature from the first.
View detail
The sheet and the Rear fender were removed and attached.It completed in about 30 minutes, reading the description.The woman has also attached easily.
The sheet and the Rear fender were removed and attached.It completed in about 30 minutes, reading the
description.The
woman has also attached easily.
View detail
Using the Carrier of a pure Detachable, it had attached on the Rear fender, but it exchanged to this Meeting carrier, and only a few was lowered back and attached., as a result a pure Passenger seat were also able to be attached. When using it by
Using the Carrier of a pure Detachable, it had attached on the Rear fender, but it exchanged to this Meeting carrier, and only a few was lowered back and attached.
, as a result a pure Passenger seat were also able to be attached.
When using it by a Tandem and a Passenger however applies weight to a backrest, durability has a big difficulty.I think that there is no problem in particular if a Tandem is not carried out.Although the
Tour Pack was pure, since the griddle was stuck on the bottom, considerable difficulty was carried out making the hole for U bolts in this.
View detail
[Webike Monitor] attachment is also easy, comes out strongly, and is good touch. Although it wavered with Ventura's thing, I purchase here and think that it was good. Although the box of 3.5 kg of Base lumps, rain gear, and a bag are put in an
[Webike Monitor]
attachment is also easy, comes out strongly, and is good touch.
Although it wavered with
Ventura's thing, I purchase here and think that it was good.
Although the box of 3.5 kg of
Base lumps, rain gear, and a bag are put in and it commutes every day, for the moment, there is no problem.
Although it has become full of cracks by the metal fittings which attach the Base of the box, since there is no schedule to remove, I think the good kana -.
View detail
Fits on my 2012 TU250X like a glove. Minimum tools and skill required, it is a very well thought out rack that comes as a single piece with just additional bolts for installation. Works great with many universal fit top cases and seems sturdy too.
Fits on my 2012 TU250X like a glove. Minimum tools and skill required, it is a very well thought out rack that comes as a single piece with just additional bolts for installation. Works great with many universal fit top cases and seems sturdy too. View detail
Since it has ridden on the APE and was always afflicted by loading nature, it obtained by making it purchase this time. Although some prices are stretched, it is dramatically satisfied with j strongly structure.
Since it has ridden on the APE and was always afflicted by loading nature, it obtained by making it purchase this time.
Although some
prices are stretched, it is dramatically satisfied with j strongly structure.
View detail
[Webike Monitor] Also making is solid and a Design is also very good! Although refrained from the stopping Touring, I can wish now to go out even for right now, since it was only a Tank bag until now.
[Webike Monitor] Also making
is solid and a Design is also very good!
Although refrained from the stopping Touring, I can wish now to go out even for right now, since it was only a Tank bag until now.
View detail
It attached to ape100. Although the object vehicle type given in Mr. [ webike ] had become a statement called ape100 (-08), it seems that it is real ALL-MODEL correspondence since typeD had also been corresponding at the instruction manual of the pro
It attached to ape100.
Although the object vehicle type given in Mr. [
webike ] had become a statement called ape100 (-08), it seems that it is real ALL-MODEL correspondence since typeD had also been corresponding at the instruction manual of the product.
Unlike
others' thing, it becomes a sheet attachment part, a Sub-frame attachment part, and a three-point stop of the Clamp (addition) to a Sub frame.
Although paint application and welding of the
products were beautiful, when attaching to our vehicles, the hole position of the inner one Bolt of four Bolts attached to a car body did not suit easily.
It seems that attachment may not go with Pons attachment by individual specificity although it is able to attach by some corrections.
If even
hole position suits exactly, I will think whether DIY beginners can also attach.
A tool required for
attachment is only several Wrenches and Hexagon wrench of a Millimeters size.
I think whether to be a product which we can recommend to you, since a Quality is also high as
products.
View detail
Since BOX was attached, it purchased previously. Although it was alone serious so so, since there is also no shakiness and attachment was solid, it was good after attachment.
Since BOX was attached, it purchased previously.
Although it was alone serious so so, since there is also no shakiness and
attachment was solid, it was good after attachment.
View detail