Reviews
Inexpensive but well-made product.
Purchased to make the OEM's wild Fender SMART.
I'd say it's one of the less expensive Fender Eliminator Kits.
I think the product itself is well made and looks good.
I wondered about License lamp Wiring.
Both have two wires, one red and one black, but the instruction manual for KIJIMA's wire is written to connect them in the opposite direction.
Is it some kind of diversion? If you know, I'm pretty sure they should be the same color as the OEM….
Also, the bolt used to attach the Kit to the car body is a hexagonal button bolt with a round head,
It is easy to lick, so regular Bolt is considered better.
Other than Wiring and Bolt, I think this is a great product.
View detail
Now you have the ideal Style!
I have been an Up Fender guy since my old ST50, so when I found out about this product, I pre-ordered it even before it was released and bought it.
The instruction manual says to prepare OEM parts for the bolt that holds the Fork Guard separately, but I had no problem with the DAX Fender bolt. However, I had no problem using the same bolt that holds the DAX Fender. I was able to install it even as an amateur, but the instruction manual is written on two A4 sheets of WhiteBlack paper and contains only one quantity of parts.:It is a little bit difficult to understand because it is explained with more than 5pcs. pictures. when I use KIJIMA's ForkEmblem together, there is a space to move Horn to the rear, but the length of Wiring of Horn is not enough. The female terminal is not L-Type, so it is not good. I will think about it a little because the Horn Relocation Kit for MONKEY125 from Emon seems to be available.
The Styling is Large compared to the OEM's wild Plastic, and the increased Clearance of the Fender and Tire makes me fantasize about the next Custom if I can make it a block tie ya ….
View detail
KIJIMA Fender Eliminator Kit
It took more than two months for delivery, probably due to Corona, but it was worth the wait.
The instruction manual was easy to understand, so even an amateur could install it rather smoothly.
View detail
Fits: HARLEY-DAVIDSON Softail Breakout (Model FXBR), HARLEY-DAVIDSON Softail Breakout S (Model FXBRS)
Exposes the wide tyres more with this number plate
Wanted to get more tyre view on my fxbrs, and I re kon this has served me well vs a ersuper expensive solution from another vendor. The led is a little bluish white type, I need to put in some colour tape or something to make it less flashy. (Can't locate fxbrs under bike model here, thus chose nightster) View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Looks good!
All of our motorcycles were registered before September 30, 2021.
The refreshing feeling around the Tail and the angle of the Number are unquestionably good for the Parenthesis, and the wiring is also stored in the Kit, so the Reverse side is not full of roughness.
However, it seems that the angle of License Plate Light becomes NG when OEM License Lamp is used as it is, and it doesn't pass the vehicle inspection though it is said that it is possible to use OEM License Lamp as it is.
View detail
No installation problems
If you have your own Level tools (hexagon, extension, driver) and vinyls, you can install it. The work time is enough for 1 hour.
If you put the vinyls on the License Plate LightWiring, it will be safe even in the rainy days.If you pay attention to the center of the Number installation, it looks Refreshing and there is no noise.
View detail
The Rear area has been Refreshingly improved, but …
The rear area is refreshing and it is recommended for the first custom. The clearance of the screw between the tail lamp and the license light is very narrow, so you need to be careful when you wash your car. I put a protective film on the tail lens to prevent scratches. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Fender Eliminator Kit installed
[How is it used?
installed
Was the one you received as per Image?
It was heavier than I thought.
Was the installation difficult?
Large sturdy even for beginners
How was your experience with it?
I think that it is cool.
[Included Parts:were they on?
KIJIMA's Sticker
[Was there anything that disappointed you?
nothing special
Installation Instruction Manual is also available.
You'll need a fair amount of tools, though.
You can also find them at the 100 yen shop.
It takes about 2 hours to complete the work.
View detail
To One point.
I recommend it for a little One point. View detail
Simple Fender Eliminator
The Fender Eliminator that does the most refreshing of all the companies on the market.
If you are planning to change to an external Blinker
It is Recommendation because Blinker base can be separated.
View detail
as expected (as opposed to expected)
Z1000 It was possible to install it without a problem in 19 years MODEL though it was said that it corresponded to 14-17 years, but I changed it to Fender Eliminator because Camera becomes conspicuous when I put on Dramecorder Camera though it was good with the long Fender of OEM. I was able to install the Fender Eliminator without any problems;
The Bracket may need a little hang when installing the Blinker, but with a little lube it was easy to work with.
View detail
Rear Area Refreshing
The MAJESTYS MOSSARY FENDER refreshing a lot! 。 The instruction manual is easy to understand, but it's hard to see with WhiteBlack, but if you don't do the Fender cut carefully, you can see the cut surface normally. 。
It takes a little skill and a few tools to cut 。 If you're unsure, you might want to have the Shop do it for you. 。 I bought it because it's cheaper than the competitors' products and the Reflector lands on top of the Number, which is good. 。 If there is a reflector under the number, it looks like an afterthought, so I chose KIJIMA's Fender Eliminator Kit! The LED on the Number is bright too!
View detail
The solution to the starkness
I think it's a very satisfying product for the price considering the Gold face value
If you ask for Diller, it will cost you 20,000+ including labor, so I thought about the Wallet situation and
If you really want to make a Fender Eliminator, I can recommend it
The Instruction Manual is also well enclosed, and even as a maintenance novice myself, I was able to complete the 2-hour I managed to install it in just under a year
However, the photo of the Instruction Manual is hard to see because it is WhiteBlack So some of the mounting screws may be lost
Also, as mentioned in other people's imprints, the Cable of License Plate Light is
Be careful not to install RedBlack in reverse
The part of the Instruction Manual that I don't understand is that there are videos of our predecessors on YouTube Since it's up
It can be installed as a reference
I'm happy to have my ass cleaned up and my ass cleared out of the OEM Fender, but
One thing that concerns me
I can't do anything about it on the product, but the back of the Fender is the same as the back of the Parts installation
There are several gaps in the car body, which may allow water droplets to enter the interior of the car body when it rains or when washing the car
I'm using Vinyl Tape to seal the gaps, but that's all I need to get rid of
View detail
Parenthesis OK
After all, did you think that Fender Eliminator is Parenthesis better?
OEMBlinker and Loading Hook are good for OEM use, but Center Wiring was against RedBlack as other people wrote imprints
View detail
Appearance Refreshing There is also mudguards practical
As impressions after installation it does not mean that mud does not fly at all,
It's a Level I do not mind so far as mudguards are on..
The deciding factor of purchase was the place where Hook can be used as it is and the existence of mudguard.
Anxious points are somewhat when the Gold genus is aligned with the OEM, but it is about a point that looks cheap.
Also, it took quite a while to install.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Longer than I expected
Material rather than Fender Eliminator : It is the feeling of FRP's Short fender.
Installation is simple.
The rigidity seems to be weak and the License Plate vibrates insane.
I am satisfied overall.
View detail
Neat
Ideal for keeping Cost as low as possible and making it a Fender Eliminator. Just because Material is Steel, aged deterioration seems to be quick, but I think that it is cost effective. View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Valve of Tail lamp has run out
Easy to install, the body has become considerably lighter.
However, I feel that the part that License Plate will attach does not depend on.
Because it is a bonus, it may not be good to complain, but Valve of Tail lamp
I'm out of time.
I do not know the cause, but if you run with it running out, it is dangerous.
If you changed it, let's do a pre-mission check neatly, every time.
View detail
Fits: HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard
When attaching, be careful with Fitting
As APE 100's RearDamper was muddy, it got stuck and purchased.
Although it accomplished the purpose, when wearing with a little caution and wearing it, feeling rubbing Tire zori zori.
(It may be better to float a little with the attached SpongeSeal)
I can not affix Chain guard.
(If you do, you need to cut it to Dynamic considerably. Maybe it will support one point)
Connection of Chain guard It might be better if it was feeling to use Bracket.
View detail
It will be cool.
It takes a little time and effort to install. It is not because the product is bad, because it is Scooter, so many parts to remove are many. Handling Handling Since the Instruction Manual is polite, if you proceed along it, there is no problem with installation. However, it is impossible to return Motorcycle to NORMAL at the time of sale because it is necessary to Cut Fender to Large width.
View detail