Reviews
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R3
Refreshing
If you buy a CowlMotorcycle, I still prefer the Fender Eliminator. It looks cool and I am very happy with it. It was easy to install. View detail
stability
Since KIJIMA's Fender Eliminator Kit was used for the previous Motorcycle, KIJIMA was chosen for this project as well.
Simple and the angle is just right.
If you want to make Blinker an Other Brand Product in the future, you can remove the Bracket.
The HexBolt on the OEMFender Bracket is too hard when replaced, so you will need a proper tool and a bit of hang. If you are not confident, you might want to ask a shop to do it for you.
View detail
Fits: HARLEY-DAVIDSON Softail Breakout (Model FXBR), HARLEY-DAVIDSON Softail Breakout S (Model FXBRS)
Exposes the wide tyres more with this number plate
Wanted to get more tyre view on my fxbrs, and I re kon this has served me well vs a ersuper expensive solution from another vendor. The led is a little bluish white type, I need to put in some colour tape or something to make it less flashy. (Can't locate fxbrs under bike model here, thus chose nightster) View detail
Maybe Large Sturdy
It is very angled but I have never been stopped by the police so probably Large sturdy. View detail
SG20J Fender Eliminator
My OEMFender was falling apart, so I decided to go with the Fender Eliminator.
Installation was easy and the Fit was perfect.
Refreshing to look at, but you might want to lower the Number a bit?
View detail
Prevention of mud stains on top case
[How is it used?
When I drove in the rain with the top case attached while touring, I had trouble with the handle and keyhole of the top case getting covered in slop from the slop splashed up by the rear wheels. So I came up with the idea of extending the Rear Fender, and when I was looking for something better, I found this product.
Was the one you received as per Image?
I don't know what to say, but Mudguard has a bit of a nostalgic Showa-era look to it...w I don't think it looks good on FZS600, but I'm convinced it's tacky cool.
Was the installation difficult?
It is very easy and nice that the OEM Fender can be fixed together with the Number mounting bolt without any modification. If you don't like it, you can remove it immediately.
How was your experience with it?
Cost performance is great!
[Included Parts:were they on?
There is not
[Was there anything that disappointed you?
It may seem a little tacky, but it did what I expected it to do, so I give it a perfect score of 100!
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
SR400 Rear Fender Eliminator
Good quality, fits my 2015 SR400 very well. The gel coat finish was good enough to use as is and I like the lines on the bike better now. Hardware included was good quality as well. This is the best short fender out there for cost and function. I did remove the supplied brake light and used a round one. View detail
Fits: HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard
cool!
It's nice, but the size is not right, so it's a product that makes you worry while installing ------------------------------------------------------------ ----- It's cool, but it's not perfect, so it's a product that makes you worry about installing it. Powered by Google Translator View detail
One point
Motorcycle performance will not increase, but cuteness will. View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R3, YAMAHA MT-03, YAMAHA YZF-R3
Fender Eliminator Kit with good shape
I installed this on my 2019 YZF-R25.
The OEM Fender is quite large and is very useful to prevent mud splashes, but I wanted to refine the rear area, so I installed KIJIMA's Fender Eliminator Kit.
The installation was very easy and did not require any special tools. It was very easy to install and did not require any special skills. Even first time motorcycle users with tools should be able to install it without any problems.
Kijima's Fender Eliminator Kit is of good quality and has a very simple shape compared to the elaborate shapes of other companies, so you can refine the rear area.
The Fender Eliminator is a great recommendation for those who want a simple look and feel.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Looks good!
All of our motorcycles were registered before September 30, 2021.
The refreshing feeling around the Tail and the angle of the Number are unquestionably good for the Parenthesis, and the wiring is also stored in the Kit, so the Reverse side is not full of roughness.
However, it seems that the angle of License Plate Light becomes NG when OEM License Lamp is used as it is, and it doesn't pass the vehicle inspection though it is said that it is possible to use OEM License Lamp as it is.
View detail
KIJIMA
The details of the rear come to life. That's so cool. I think I did a good job. The more you look at it, the more beautiful it is. Sell a lot. good~ View detail
No installation problems
If you have your own Level tools (hexagon, extension, driver) and vinyls, you can install it. The work time is enough for 1 hour.
If you put the vinyls on the License Plate LightWiring, it will be safe even in the rainy days.If you pay attention to the center of the Number installation, it looks Refreshing and there is no noise.
View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
KIJIMANumberless
I just wanted to add a word that the car may not pass inspection due to the new Number Law. View detail
Fits: HONDA CBR250R (2011-), HONDA CBR250R (2011-), HONDA CBR125R, HONDA CBR125R
SS-like around Rear.
This is the first part that was installed on the delivered Toki along with the LED Tail.
I chose HURRICANE from webike because I heard that KITACO's body is made of FRP, and I wanted to use steel that won't be damaged by single vibration; Crying 。
I chose KIJIMA as the next best.
The installation was a little difficult because the Instruction Manual was written for the previous year.
Personally, I'd be 100% happy with Refreshing if it didn't have the Black tongue-like area under the Tail lamp……
I'd say 65% satisfaction.
View detail
The Rear area has been Refreshingly improved, but …
The rear area is refreshing and it is recommended for the first custom. The clearance of the screw between the tail lamp and the license light is very narrow, so you need to be careful when you wash your car. I put a protective film on the tail lens to prevent scratches. View detail
Not bad but not perfect
Personally, I feel that the Z900RS still does not have a rear fender, so it looks more vigorous, so I chose this kit. The installation is simple and the workmanship looks good, which is an advantage. There are two imperfections: the first is that the threading hole on the top plate of this kit is a bit big. If the water pavement is not treated, there will be muddy water under the seat. Finally, I use cloth tape to solve the problem. . Then there is the screw hole position that cannot meet the Chinese standard license plate. It would be nice if the screw hole can be expanded to both sides. ---------------------------------------------- Personal aesthetics, I think the Z900RS car or no rear fender looks more spiritual, so I chose this kit. Easy to install, good workmanship, which is the advantage. There are two imperfections: first of all, the top plate of this kit is slightly larger than the threaded holes, if not treated with water on the road will be splashed under the seat is full of mud and water, and finally I used cloth-based tape to solve the problem. Then is the screw holes can not meet the Chinese specifications of the license plate, if the screw holes can be expanded a little to both sides would be good. View detail
Fits: HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR
Fender Eliminator Kit installed
[How is it used?
installed
Was the one you received as per Image?
It was heavier than I thought.
Was the installation difficult?
Large sturdy even for beginners
How was your experience with it?
I think that it is cool.
[Included Parts:were they on?
KIJIMA's Sticker
[Was there anything that disappointed you?
nothing special
Installation Instruction Manual is also available.
You'll need a fair amount of tools, though.
You can also find them at the 100 yen shop.
It takes about 2 hours to complete the work.
View detail
Refreshing.
It looks Refreshing and great.
The angle is standing up a little too much, so I'm engaging something that can adjust the DAYTONA angle.
View detail
Very good quality
I fitted it on my 2016 CB400SF NC42. I just had to cut and bend the licence plate support and it has become even more clean! Highly recommended. The quality is there. Solid! View detail