Reviews
Moped Plate
It is easy to install.I just installed it,
How durable is the Sticker?
View detail
It is easy to install.!!
Anyone can easily install it.
I am satisfied with the shape as expected.
The color would have been much better if it had been matte….
It's looking good.
View detail
Fits: HONDA REBEL500, HONDA REBEL250SEdition, HONDA REBEL250
KIJIMAFrontReachSeat
I used to ride with a GelCushion, but it used to be a hassle with gapping, etc. The Cushion is no longer necessary, and the seating has become more comfortable.
Regarding the installation, there is too much play in the claws that insert into the body, so some modification is necessary, such as covering the claws with rubber material. I would like you to improve this part.
View detail
It became a little Fashion.
The purpose of the parts is to make the Indicator Lamp easier to see. Of course it has that effect, but I think there is a little change in aerodynamics.
I feel strong wind pressure when I reach about 100 km/h at high speed. After installing this Visor, I felt it was reduced a little.
I recommend it to anyone who wants to do a little something better.
View detail
Fits: HARLEY-DAVIDSON Dyna Convertible FXDS-CONV, HARLEY-DAVIDSON Dyna Low Rider EFI FXDL, HARLEY-DAVIDSON Dyna Low Rider FXDL, HARLEY-DAVIDSON Dyna Street Bob FXDB, HARLEY-DAVIDSON Dyna Super Glide Custom EFI FXDCI, HARLEY-DAVIDSON Dyna Super Glide Custom FXDC, HARLEY-DAVIDSON Dyna Super Glide EFI FXDI, HARLEY-DAVIDSON Dyna Super Glide FXD, HARLEY-DAVIDSON Dyna Super Glide FXD35, HARLEY-DAVIDSON Dyna Super Glide Sport EFI FXDXI, HARLEY-DAVIDSON Dyna Super Glide Sport FXDX, HARLEY-DAVIDSON Dyna Super Glide T-Sport FXDXT, HARLEY-DAVIDSON Dyna Switchback FLD, HARLEY-DAVIDSON FXR 2, HARLEY-DAVIDSON FXR 3, HARLEY-DAVIDSON FXR 4, HARLEY-DAVIDSON Softail 15th Anniversary Fat Boy FLSTF, HARLEY-DAVIDSON Softail Cross Bones FLSTSB, HARLEY-DAVIDSON Softail Custom EFI FXSTC, HARLEY-DAVIDSON Softail Fat Boy EFI FLSTFI
Parenthesis is good.
It is easy to install and looks great Parenthesis. View detail
Fits: Others , HONDA 400X, HONDA ADV150, HONDA CB1000, HONDA CB1000, HONDA CB1000SF, HONDA CB1100, HONDA CB1100, HONDA CB1100CA, HONDA CB1100NA, HONDA CB1100SF, HONDA CB1100SF, HONDA CB1300SUPERFOUR, HONDA CB250F, HONDA CB250R, HONDA CB250R, HONDA CB300F, HONDA CB300F, HONDA CB300F, HONDA CB300R
Number Protection
I installed it to prevent the Number from bending. So far, it works well because it does not bend when it hits.
Also, it's very heavy.
View detail
A4 Size is good.
Size is A4, so it is easy to handle.
The fact that it is not in a volume is good because it can be handled without Habit being attached.
View detail
cut out and use
Cut out and affix to the area of interest in Motorcycle. View detail
Inexpensive but well-made product.
Purchased to make the OEM's wild Fender SMART.
I'd say it's one of the less expensive Fender Eliminator Kits.
I think the product itself is well made and looks good.
I wondered about License lamp Wiring.
Both have two wires, one red and one black, but the instruction manual for KIJIMA's wire is written to connect them in the opposite direction.
Is it some kind of diversion? If you know, I'm pretty sure they should be the same color as the OEM….
Also, the bolt used to attach the Kit to the car body is a hexagonal button bolt with a round head,
It is easy to lick, so regular Bolt is considered better.
Other than Wiring and Bolt, I think this is a great product.
View detail
MONKEY Side cover
The installation position is Exactly, high quality, and I am satisfied with it. View detail
Now you have the ideal Style!
I have been an Up Fender guy since my old ST50, so when I found out about this product, I pre-ordered it even before it was released and bought it.
The instruction manual says to prepare OEM parts for the bolt that holds the Fork Guard separately, but I had no problem with the DAX Fender bolt. However, I had no problem using the same bolt that holds the DAX Fender. I was able to install it even as an amateur, but the instruction manual is written on two A4 sheets of WhiteBlack paper and contains only one quantity of parts.:It is a little bit difficult to understand because it is explained with more than 5pcs. pictures. when I use KIJIMA's ForkEmblem together, there is a space to move Horn to the rear, but the length of Wiring of Horn is not enough. The female terminal is not L-Type, so it is not good. I will think about it a little because the Horn Relocation Kit for MONKEY125 from Emon seems to be available.
The Styling is Large compared to the OEM's wild Plastic, and the increased Clearance of the Fender and Tire makes me fantasize about the next Custom if I can make it a block tie ya ….
View detail
good shape
The shape matches the Motorcycle design. 。
Easy to handle.
View detail
A little cheaper would be nice
Short fender was installed along with the conversion to side number.
It is easy to attach with double-sided tape.
It would be helpful if it were cheaper since it is just a Reflector.
View detail
cheap but quite good
I use Kijima tank pad on my Honda VFR800 VTEC gen 6 2003. Kijima tank pad is a bit cheap, small size but quite good. I think it fits very well. View detail
Fits: HARLEY-DAVIDSON FLFB, HARLEY-DAVIDSON FLSL, HARLEY-DAVIDSON FXBB
Number bracket kit
Refreshing around the Number.
Parenthesis I got better.
View detail
I think it's good overall.
I have not had it installed long, but I think I am highly satisfied with its rigidity, appearance, and price.
I also think that even an amateur can easily install it. However, in my case, I over-tightened the supplied JointBolt and screwed up the screw part, which cost me additional money and time to order another one. I was so scared that I finally took it to a motorcycle shop. It has nothing to do with the product itself, though.
View detail
a good product
Quality and Texture Information Flat Braces It was good to install Honda emblem for ease of use Design information for fender bolt holes Compared to other products, there is a Honda emblem with a difference in price and performance, so I only buy brackets WeBike packaging is always great. Arrives in a week for delivery and packaging Monkey125 with down bracket installed is easy to install, but it may be difficult to install if it is std. It doesn't matter if you have a Honda emblem, but buying together can be a small payment View detail
Grab Bar
For the price, it is a well-made product. View detail
It fits perfectly~
I purchased this to secure my bike z900 rs se bag. It was out of stock, so I kept waiting to buy it, and installation was easy and simple.
However, there are two areas on the left and right sides that have been repainted or overpainted. It was difficult to return it, so I decided to just use it. -------------------------------------------------- -------- It was a purchase to fix my bike Z900 RS SE bag. The stock continued and I kept waiting and purchased and the mount was easy and easy. However, there are two parts of the painting part of the painting. The return is also difficult, so I decide to write it. Powered by Google Translator
View detail
It looks like OEM Product and feels comfortable.
I bought it because I didn't like the design of the GSXR125, which looks like just removing the cowl. Personally, I think it looks much more balanced with this Screen.
The windproof effect is almost the same. This was within our expectations as we did not originally expect it. I am satisfied with this product because I purchased it for its appearance.
View detail