Reviews
big
Slightly protruding? In the event of a fall
LargeDurable?
View detail
Good
The price is a little high, but it has good footing.
STAND is hard, which helps.
View detail
I guess I'm more concerned with looks.
Due to the narrow pipe and the nature of a grom motorcycle, it is not possible to install all of them on the frame, so some of them are installed on the bottom of the engine block. I'm not sure about its defensive power, but it looks great. View detail
Fits: YAMAHA serow250 s, YAMAHA SEROW250
Durability is a problem.
The Horn (Two Extensions) for kicking up the bike is Large and easy to use, but the Two Extensions came off after a year or so. I don't know why, I had it installed at a motorcycle shop, but the bolt is not the same as the material:It seems to be Aluminum. It is unbelievable that they use the aluminum bolt for the part that the stress is applied at every kick-up and kick-down. It is the Level of the old China product. The price is too high. The bottom plate is also Material:I don't think it has to be Aluminum. Because they are Parts that attach to Steel's OEMSide Stand. View detail
It is not bad
I have a Motorcycle in my yard, but the ground is dirt, so it's unstable when it rains.
So I bought this one and installed it in a position to put the Side Stand in.
I think the strength is high for being light. The disadvantage is that it is difficult to find in the dark when it is black, and because it is light, it is sometimes blown away in the strong wind.
Other than that, I have no complaints and I am still using it.
View detail
good quality
I installed it with fast delivery. The inner joint does not match the size of the chassis a little bit, so it does not fit perfectly. fitted with The inside fittings do not fit perfectly because the size of the car is slightly out of alignment. I installed it across the bottom, but I feel uneasy, but there is no problem in using the stand. The quality is perfect(translated by Google Translator) View detail
Only thing wrong is that Ubolt is stainless steel
I bought these and really like them for my NC700X. But when it comes time to adjust the valves you have to remove the right Ubolt to remove plastic plug so you can align timing marks. The Ubolt is stainless steel and without lubricant it galls and doesn't let the nut unthread so the thing twists off. In USA and I can't get more ubolts or don't know how to contact KIJIMA. View detail
Insurance when standing moss
Regarding the installation, you can follow the instructions as instructed and install it for as long as 30 minutes.
Since there is no Cushion material on the side that comes into contact with the Frame, we recommend that you chew a cushioning material if you do not want to scratch the Frame. We substituted the 1 mm Rubber roll with Double-sided Tape.
As if written by others, if prepared - - - I think that it is a way of using it. Accident etc. In the case of severe shock, the Damage may increase.
Things made by other companies may seem to have the same effect as Sub Frame, but there is not such a thing about here, and Damage reduction at standstill is Main.
Because it is Steel, it was good that I thought that the price would be cheaper a little more.
View detail
The remains of welding of the parts attached were somewhat rude. There was no problem in particular about and others.
The remains of welding of the parts attached were somewhat rude.
There was no problem in particular about
and others.
View detail
Fits: HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883
Although a Knee grip can be carried out and it becomes easy to ride, if it has ridden for a long time since there is no Coating, heat is transmitted very well and it is hot.
Although a Knee grip can be carried out and it becomes easy to ride, if it has ridden for a long time since there is no Coating, heat is transmitted very well and it is hot. View detail
Fits: YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC
From a car body, it projects horizontally greatly and claims considerably. If the step board is attached, wearing is difficult, but an engine pedal is firmly protected from a fall. It is good touch.
From a car body, it projects horizontally greatly and claims considerably.
If the step board is attached, wearing is difficult, but an engine pedal is firmly protected from a fall.
It is good touch.
View detail
Fits: HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200, HARLEY-DAVIDSON XLH883, HARLEY-DAVIDSON XLH1200
It attaches to XL883L. appearance is pure -- although it is more smallish and good -- a step -- previously -- an engine guard -- pickpocket measure. This is running and is fairly dreadful. In addition, only two screw threads are not attached t
It attaches to XL883L.
appearance is pure -- although it is more smallish and good -- a step -- previously -- an engine guard -- pickpocket measure.
This is running and is fairly dreadful.
In addition, only two screw threads are not attached to there being four tapped holes.
It is also a subtracting point.
View detail