Reviews
This is good.
The shape of the mirror is designed to avoid the arm holding the handlebar, so the visibility is surprisingly good, and the bracket is thin, so it may be good to be less assertive.
The Mounting Base is a little large, so I adjusted it with a washer so that there would be no wound left on the cowl when tightening it.
View detail
Not good
It might be a little hard to see and I don't like it. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, SUZUKI V-Strom250, SUZUKI GSR250, SUZUKI BANDIT1200-NAKED GSF1200, SUZUKI B-KING, SUZUKI SV1000S, HONDA REBEL250 S Edition, HONDA REBEL250 S Edition, HONDA REBEL250, HONDA REBEL250, HONDA REBEL250, HONDA REBEL250, HONDA REBEL500, HONDA REBEL500, HONDA REBEL500, HONDA REBEL500, HONDA REBEL250, HONDA REBEL250, HONDA MONKEY125
Designed to fit any motorbike, with a luxurious and sporty look and feel.
The mirror looks like anodox round mirror, but the combination of aluminum and carbon gives it a luxurious and sporty appearance.
Looks good on a variety of Motorcycles
I was a little worried that the mirror surface might be too small. I was a little worried that the mirror surface might be too small, but it seems to be slightly convex, so when I actually drive the car, I don't feel that much of an invisible stress.
View detail
turning point
The screw must be drilled a little where the screw hits the surrounding stopper, otherwise it will spin around at high speeds. View detail
Fits: HONDA MONKEY125, HONDA MONKEY125, SUZUKI V-Strom250, SUZUKI GSR250, SUZUKI BANDIT1200-NAKED GSF1200, SUZUKI B-KING, SUZUKI SV1000S, HONDA REBEL250 S Edition, HONDA REBEL250 S Edition, HONDA REBEL250, HONDA REBEL250, HONDA REBEL250, HONDA REBEL250, HONDA REBEL500, HONDA REBEL500, HONDA REBEL500, HONDA REBEL500, HONDA REBEL250, HONDA REBEL250, HONDA MONKEY125
For REBEL.
I bought this to change the look of REBEL.
It is expensive for Mirror.
It's easy to put on and cool!
View detail
I think it's a good product.
I think this product has a very good balance between production and price.
However, I think it is difficult to see the MirrorBody because of its small area.
This is a good choice for those who can separate the importance of production and design.
View detail
Parenthesis is good, but ….
I can't see behind me because it picks up vibration and blurs the image…. View detail
Design is Cool but
Normal mirror was available from Handlebar, so I installed it to make it easier to slip through, but the vibration absorption was so weak and shaky that it was hard to see, so I went back to Normal (tears). View detail
I wonder if it will wobble….
I installed it because of its color, but I had a problem with it rattling even after tightening the bolts. View detail
The angle can be changed.
The angle of the base changes, so I could enjoy it to my liking. View detail
Simple!
I bought it because I wanted to put it lower than the handlebar!
Better than I thought it would be and I'm happy with Large!
Lower than handlebar for simplicity!
View detail
Fits: HONDA PS250, HONDA FORZA, HONDA MONKEY125, HONDA REBEL250, SUZUKI ST250, SUZUKI GEMMA, YAMAHA GRAND MAJESTY, HONDA Rebel300
Switching from BAREN classic in Tanax!
[How is it used?
I used it on a MainMotorcycle XJR1300C. Mainly for touring and city riding.
My XJR has an antlion Handlebar Post and DAYTONA RCMSteel handleSpec.
Originally, we were using Tanax's BAREN classic, but we didn't like the style because of its subtle height adjustment range, so we decided to switch to KIJIMA's EUROlType this time.
Was the one you received as per Image?
For better or worse, it was just like the Image. Compared to the TANA-X, the exterior texture is overwhelmingly cheap and the detailed processing is poor.
As you can see in the images, Tanax is on top, even down to the Edge section of the product and the paint.
The mirror surface is slightly larger on KIJIMA than on TANA-X.
The only thing that KIJIMA moths have over the others is by far the finest number of height adjustment steps.
Now we have the ideal height. This is the only way to close your eyes to the bad parts of Others.
Was the installation difficult?
It is not difficult at all...Porto comes with it, but it is very roughly made...don't use it.
I used the Bolt that came with my Tanax Napoleon On. The accuracy is good and the color is Black.
How was your experience with it?
I am satisfied with the Style because it turned out exactly as I expected.
An unexpected improvement is that the Mirror is slightly heavier than the Tanax Mirror, but the Mirror itself vibrates less?
Mirror shake, which was bad at around 100-120 km/h, is gone, and I can now properly check my rearward direction!
[Included Parts:were they on?
Three mounting Porto's are included.
M8Normal Thread Screw:1pc.
M10 Standard Thread Screw:1pc.
M10 Opposite Thread Screw:1pc.
I don't think you should use it though, Bolt recommends Tanax Black.
[Was there anything that disappointed you?
There are some small BALI and the paint is dirty........ Well, it's a good thing that the Style has improved.
View detail
Easy to slip through
Please note that the screw diameter is different for K7...
K7 requires Screw Diameter Conversion Adapter (8mm→10mm).
Installation is easy, but the Front cowl must be removed.
I like the appearance of the product because it is not cheap, yet it does not stand out in a bad way and is calm.
Above all, it is much easier to slip through the space-saving Mirror than the OEM Mirror.
However, the Mirror portion is smaller than the OEM portion, so the visible area is narrower.
Well, the ease of slipping through is still attractive, so it is a recommendation.
View detail
Easy to slip through
Please note that the screw diameter is different for K7...
K7 requires Screw Diameter Conversion Adapter (8mm→10mm).
Installation is easy, but the Front cowl must be removed.
I like the appearance of the product because it is not cheap, yet it does not stand out in a bad way and is calm.
Above all, it is much easier to slip through the space-saving Mirror than the OEM Mirror.
However, the Mirror portion is smaller than the OEM portion, so the visible area is narrower.
Well, the ease of slipping through is still attractive, so it is a recommendation.
View detail
As expected
Sorry, I haven't installed it yet because I haven't finished the Body Motorcycle yet, but the texture is the Z2Mirror of yesteryear.
I am looking forward to putting it on.
View detail
Fits: HONDA PS250, HONDA FORZA, HONDA MONKEY125, HONDA REBEL250, SUZUKI ST250, SUZUKI GEMMA, YAMAHA GRAND MAJESTY, HONDA Rebel300
Rear view mirrors
The item shipped quickly and packaged well. I installed on my Yamaha Morphous and looks and works great. I highly highly recommend for price and custom look. View detail
Fits: HONDA PS250, HONDA FORZA, HONDA MONKEY125, HONDA REBEL250, SUZUKI ST250, SUZUKI GEMMA, YAMAHA GRAND MAJESTY, HONDA Rebel300
Good solid product
[How is it used? I am satisfied
Was the one you received as per Image? substitute
Was the installation difficult? It is not difficult.
How was your experience with it? I think it is good. I think it is strong against vibration and headwind.
[Included Parts:were they on?
[Was there anything that disappointed you? It is surprisingly heavy.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
It's blurry. ('; Ω; `)
I installed it for designability, but since Idling, I can't see much at all due to vibration.
Vibration subsides somewhat while driving, but it is dangerous and we are considering another product.
View detail
Fits: HONDA PS250, HONDA FORZA, HONDA MONKEY125, HONDA REBEL250, SUZUKI ST250, SUZUKI GEMMA, YAMAHA GRAND MAJESTY, HONDA Rebel300
The product itself is a good, solid product.
The product itself is good and solid. I think it is resistant to vibration and wind. Is it a little heavy? It is a little heavy. View detail
It attached to PCX. Since the usual catalogue article was likely to be uncomfortable by the dual mirror, a blue mirror type called the object for BMW is purchased. Here where it is considered suiting car-body form eventually although I felt that t
It attached to PCX.
Since the usual catalogue article was likely to be uncomfortable by the dual mirror, a blue mirror type called the object for BMW is purchased.
Here where it is considered suiting car-body form eventually although I felt that the direction of an oval (Tech02) suited the line of a meter or a visor and it worried dramatically is chosen.
Since it is metal mostly, there is weight, but the high grade feeling is and is satisfied from the thing made of resin.
Compared with normal, width became narrow and a fear of hitting a wall etc. at the time of parking disappeared.
.
.
Kana good also for those who do a pickpocket omission?
View detail