Reviews
Large is good, but
Lack of Bracket's Length, Body is good, but the mirror surface is Small and it is a plane mirror and the backward visibility is not very good.
There was no mention of the flat mirror in the product explanation, and that was disappointing there.
View detail
Screw has no mountain......... Rust is here.
What you see is what you can do with chitin.
If you observe well after the following problems occur
"Rust" occurred at the connection between Mirror and Arm
Although the problem is attachment, the Arm side is less than half of the included Bolt length only Screw is not cut out
The hole length is open but the Screw is not cut
I cleaned it by machining by myself,
Although I adjusted Mirror even after installation, I am not convinced how to adjust
Only one-third of the rear field of view can be seen
I will make it something else
View detail
Luxurious feeling texture at a low price
【What made you decide the purchase?】
The Motorcycle with this Back Mirror was stopped at Riders Cafe going around on the moon 1, I fell in love at first glance at first sight and heard information from Owner and immediately purchased it.
【How was it actually used?】
One Side It is possible to make Large changeable satisfaction with Design and texture which is unlikely to be less than ten thousand yen.
There is no distortion which the mirror surface tends to be in the cheap external Mirror, and anti-glare measures are taken, so HID of the following car and LEDetc. Headlight light that seems to pierce eyes of eyes can also be confirmed backward confidently.
Since you can adjust the height of Mirror by loosening the Cap bolt of the Arm part, we use it by lowering it to the extent that it does not hinder the running. Because it got better than OEMMirror thanks to you, it made me feel like Refreshing.
【Mounting was difficult?】
Bolt for Joint is attached for each type of car, but if you do not exchange frequently, I think that it is more secure to fix it after applying Screw lock of moderate strength.
Mirror's shake in a specific rotation area was severe and it was a situation that the backward confirmation could not be kept even if it wore it without painting, but the place where fixation was done with medium strength Screw lock was alleviated.
I think that there is Bless LargeSmall depending on the model of Motorcycle, but if you do not take countermeasures, the way of blending is quite different, I think whether it is better for those thinking about buying from now on.
【Please tell me the installation point and hang】
I think that it is the same for any Back Mirror, but if you are tightening the reservoir Tank with Mirror in a separate Master cylinder like my Motorcycle, you will have to damage Hose and Nipple if you do not carefully install it, Fluid There is a danger of getting on the car body, so let's be careful.
Also, since the painting of Nut for fixing the Back Mirror is sweet, it is better for Nut to be curing with Tape or paper when hanging a tool.
Because I peeled Nut's paint with it, I made a Touch up on Black with Luster erase and made it mislead.
[Is there anything I was disappointed about?]
I think it is unavoidable in terms of structure, but since it has more moving parts than OEMMirror, it will definitely come out.
Although it improved to some extent by painting Screw lock of medium strength on Mirror side Screw mountain of Bolt for Joint, it can be used for practical problem degree.
【Hope for Manufacturer - Please let me know if you have any improvement points]
For purchase at for Rightfor Left and confusing so Quantity : Pair (for Left and Right) I think that it is easy to understand if you sell it at.
Also, since DAYTONA 's Grade' s product of the same grade is cheaper than the Mirror at the actual selling price by about 1000 yen, if you can study a little more, it will be easier to buy more.
【Have you compared items?】
None. It was prompt decision purchase of love at first sight.
[Others]
General road - If you use it as a practical item regardless of high speed, some sort of ingenuity is necessary, such as using Screw lock, but we are very satisfied with the quality of no less than the high quality Back Mirror of overseas Brand regardless of the low price.
How is it as a first step of Custom? I think that it is a product that you are surely satisfied.
View detail
Ideal as an ornamental Mirror
Impression with KTM 690 DUKE.
Clearly, practicality is almost none etc.. Yes!.
Since the viewing area is narrow and there is no vibration damping property, it is hard to see even with Idling, the installation Bracket etc are also simple, so the usability is the worst because you bow on the general road.
Unfortunately, in a few days I replaced it with another Manufacturer's item.
There seems to be an impression that Cost performance is good, but there is also a much more practical Mirror in the same price range, so it is hard to say that it is good in COSPA.
But as a good point, it looks stylish and Parenthesis is good.
I thought that user-friendliness would be even better if the Mirror area is a little larger in the design as it is. (Then Bracket and vibration - Wind measure is not usable unless it is more solid)
After that, choosing Coloring is pretty epoch-making. Since other Mirror is Black one option, if it is important to look, ant may be.
It is also advantageous that it is marketed at Motorcycle mass retailers. Since I can buy it by seeing the real thing, I think that the point that it is easy to purchase with reference to Color should be evaluated.
As a general comment, as Mirror for ornaments, ant. Practical use is absolutely pear. It does not pass even for an automobile inspection, and it is not pear even at that point.
View detail
Good for the price
Mounting on RMX. Since we exchanged from outside Mask to DR - ZOEMCowl, we also exchanged Mirror.
Quantity : Pair (for Left and Right) This is the price. I think that it is good for price.
If you tighten the adjustment fixing Bolt tightly it will not lean even if it exceeds 160 km for now.
The back is hard to see, but it can not be helped if you give priority to Design. I do not have a problem because I can not see it.
There are crappy places made of plastic but the logo of KIJIMA is included in the mirror surface and the details are quite nice..
View detail
Reduce vibration.
Looks, Large Kimono, Shape, Making, this is full text satisfaction,
I want you to reduce vibration.
Things originally attached are a little
I did not shake, but this will break a bit..
I wonder if my tightening was bad?
View detail
Large sturdy Mirror
I'm looking for a sturdy Mirror but also a good looking thing, purchased this time.
Because the outside is made wide, it is easier to check backwards slightly from the OEM.
Adjustment, Mirror Bracket tightening, angle (Stepwise) And Mirror's neck premise, there are few adjustable parts, it's simple, and there is not yet any slippage during driving.
Attachment for reverse screws is also included so there was not anything particularly missing.
View detail
Makeover
Makeover wanted to exchange it.
Mirror is in 10 months and it is the third set (Lol)
I was with you earlier. "Y's Gear" Compared with the Short Type of the product, the visible range widens in the horizontal direction, making it easier to see.
Depending on the number of revolutions, I think that it is within the allowable range although it is slightly blurred. (It did not get shaken when Y's Gear was used)
Because the color of Blue is darker Custom feeling rises.
Installation requires a little hang. As I tighten Nut, the Adapter part gets relaxed so I attached Nut of the Adapter part with Screw lock so as not to loosen it. By doing this it was possible to install Firmly.
View detail
For Right, the mirror surface is facing upward from for Left, the horizontal line can not be seen.
I attached it to MONSTER 821. It is a conclusion after adjusting for one hour strongly.
For Left can be set to be the view you want to see, there is no problem. (Position from the top to the third row)
For Right is similarly adjusted from the top to the 3rd row, Quantity : Pair (for Left and Right) It does not look symmetrical.
As I accepted it, no matter how much you adjusted, Right Side did not see horizontal lines in sight.
It may be good to upgrade Mirror installation and Brake & Clutch lever, but I can not recommend it for those who can not give it up.
I did wasteful shopping..
View detail
To improve appearance...
Although OEMMirror has good visibility, I exchanged it because I did not like the appearance. Height and angle can be changed, so I am satisfied functionally. Just because Black paint falls easily, it may be better not to overtight Screw too much View detail
I installed the mirror in sr400 The frame material is plastic Overall neat, beautiful Make the car look more classic !!!
I installed the mirror in sr400 The frame material is plastic Overall neat, beautiful Make the car look more classic !!! View detail
I purchased a pair (left and right) of these Kijima Mini Mirrors because I wanted a smaller, black mirror to replace my oem chrome unit. I like how small they are, and the plastic mirror "glass" is pretty clear. The price is good too. HOWEVER, do not adju
I purchased a pair (left and right) of these Kijima Mini Mirrors because I wanted a smaller, black mirror to replace my oem chrome unit. I like how small they are, and the plastic mirror "glass" is pretty clear. The price is good too. HOWEVER, do not adjust the mirror position too often, because it will eventually loosen up and will not hold its position in the course of a ride, especially if your bike vibrates a lot, like on a thumper! The side I adjusted more frequently is now loose enough where I had to use a tape to hold its position. The other side is fine. Also, don't forget to pick up a reverse thread adapter if you have a Yamaha for the right side mirror. View detail
I like Large in this form
I bought it for SUPER CUB
I think that design is good with Mini type
I think that it is unavoidable in shape, but my legs are short so my arms are reflected and I am afraid to check backwards
Depending on the shape of the Handlebar, if you attach it to SUPER CUB it would be better if you bend the bending angle of the foot a little more
Making is good, there is a high class feeling
I am using Mirror of a different type now, but since the replacement is easy, I think I will change it with the mood at that time
View detail
Surprisingly Compact
It installed in CHALY. I compare it side by side with UniversalMirror for comparison of Large breeds. It is quite compact. Not only short Arm but also Mirror part is Small so it will be cool. I think that it is about half the viewpoint of UniversalMirror to be compared, which is hard to see behind.
I think that it is a Level of feeling that I can not see it anyhow. Let's pay attention to the backward while driving.
View detail
Full of rust
Three Joint adapters are attached per Mirror 1 pc.
Quantity : Pair (for Left and Right) Since I purchased 1 pc each, the Joint adapter
Although 6 are attached, 5 of them are rusty.
Compared to MirrorBody, Joint adapter
Creation is miscellaneous.
View detail
It's not bad. It still has that plastic texture that doesn't bother me. Also it's light, which might effect your movement. And it's fragile. (I've gotten a scratch already on the corner.)You place the ball joint on the base of the mirror between the p
It's not bad. It still has that plastic texture that doesn't bother me. Also it's light, which might effect your movement. And it's fragile. (I've gotten a scratch already on the corner.)
You place the ball joint on the base of the mirror between the plastic mounts, but it's loose even if the the screw is completely tightened. I'm worried if it can resist wind pressure because it moves so easily. I might be able to tighten it by scraping the inner side.
The mirror itself is small so the range of view is limited, but with the position of the base, you won't have trouble with visuality.
I was going to give it four stars because of the loose ball joint, but I think it'll be OK and with this cost benefit, I'm giving it five.
View detail
Probably, additional accessories will be unnecessary also by the domestic car or a reverse vehicle, since attachment accessories with a good Cost performance also correspond to the Yamaha. Since it is lightweight, it can evaluate secondarily t
Probably, additional accessories will be unnecessary also by the
domestic car or a reverse vehicle, since
attachment accessories with a good Cost performance also correspond to the Yamaha.
Since it is lightweight, it can evaluate secondarily that the
inertia of the Handle neighborhood has been reduced as compared with the NORMAL.Since the vibrational absorption of the
Mirror itself was also better than a NORMAL, blur of
rearward visibility was reduced.
Since it does not understand, it is due to return to a NORMAL at the time of an automobile inspection whether
Mirror area is filling on the present standard whether as a point to worry, my reading ability is insufficient.If a somewhat large Size has a Variation addition and
Mirror area in an Anodized Color as a
request in the back, it will become purchase examination material
next time.
View detail
It coordinated with white NC700S and became a little Accent.A thing with small Mirror area is worrisome.Kana slightly cheap although attachment is easy
It coordinated with white NC700S and became a little Accent.A thing with small
Mirror area is worrisome.Kana slightly cheap although
attachment is easy
View detail
The MAG Mirror of the KIJIMA was attached to nc700x (^○^) It could coordinate with the car body and became foppish touch.The Size difference was contained although it was a hezagonal wrench for regulation of attachment.Since seemingly it is a
The MAG Mirror of the KIJIMA was attached to nc700x (^○^) It could coordinate with the
car body and became foppish touch.The Size difference was contained although it was a hezagonal wrench for regulation of
attachment.Since seemingly it is a
nc700x [ itself ] Plastic, it is seldom worrisome, but in a NAKED with many
metal sides, texture may be worrisome for a while
.
View detail
a form and an angle -- perfectly attached without the Adapters also to my D tiger who is the Cool -- it was somewhat smaller than having merely considered ^m^
a form and an angle -- perfectly
attached without the Adapters also to my
D tiger who is the
Cool -- it was somewhat smaller than having merely considered ^m^
View detail