KIJIMA Motorcycle Controls Reviews

Filter

Write a review and get Webike Points!

Reviews

KIJIMA Controls Frame Cap Clear all

KIJIMA

27 Nov 2022

Grip Heater GH10

Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG

Japanese Webike user

4/5

Grip heater

Installation was relatively easy.
Wiring was also done with Relay and Wiring was done at Bhatt.
However, I think that it was the most strange thing for H2 to hide the wiring so that it would not be visible, because H2 has a long wiring due to the fact that it is a Universal Product.

The rest of the time, the grips were hard and uncomfortable.
I prefer it a little softer myself. View detail

KIJIMA

23 Nov 2022

Grip Heater GH10

Japanese Webike user

5/5

While other stores were out of stock due to the season, this was the lowest price available in stock and immediately delivered.

If you have some DIY experience, you should have no problem installing it. I am satisfied with the low price. View detail

KIJIMA

19 Nov 2022

Grip Heater GH08 Push Switch

Fits: HONDA CT125 HUNTER CUB, HONDA , HONDA CT125 CT110 HUNTER CUB, HONDA PCX150, HONDA PCX160, HONDA PCX, HONDA PCX150, HONDA PCX, HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125

Japanese Webike user

5/5

Say goodbye to cold fingers

It is one of the indispensable Items in midwinter equipment.
I was wondering about the integrated Switch.
For use with Handlebar Cover
Switch separate body. And it's visible.
The price was also a deciding factor.
The installation itself is not difficult, but it depends on the car model.
I think it will change.
Now you have the perfect COTA twin use! View detail

KIJIMA

16 Nov 2022

Grip Heater GH07 Switch Built-in

Fits: HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125, HONDA , HONDA CT125 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX, HONDA PCX

Japanese Webike user

5/5

Very warm.

Just warmer! And it's not hard to install on the car body! If you have any doubts, I recommend you to buy it. I use it in mid-November with thin gloves and Handlebar Cover in Yellow color. I am using it in Yellow color with thin gloves and Handlebar Cover in mid-November. I am looking forward to the middle of winter. View detail

KIJIMA

14 Nov 2022

Grip Heater GH10

Japanese Webike user

4/5

So warm, I can't go back to regular Grip!

I think it functions well as a Grip heater.

However, I had a hard time fitting the Left Side.
Apply power for 10 minutes as instructed in the Instruction Manual, then affix and insert the Aluminum Tape.
I can get about 2 inches in normally, but the rest I can't do with just my hands!
There was a piece of wood two centimeters thick, so I placed it against my stomach and successfully pushed it in with my weight.
However, with the wooden pad, I could not push it all the way in, and I needed to push it in another centimeter or so, and I completed the insertion by gripping it with my hand.

Right Side is easy.
No need to loosen AccessWire, just replace it and you're done.

I tried to add a Posh or OEM Bar End, but without a collar, it goes in too deep and crushes the Grip, and the Axel side does not turn Axel.
As a workaround, I solved the problem by layering Washers on top of each other and substituting a color!
Bolt length will be insufficient, so we changed to Bolt with 60 under the neck. View detail

KIJIMA

13 Nov 2022

Grip Heater GH10

Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R

Japanese Webike user

4/5

Attention installation on a 2022 DL1000 V-STROM250ABS.

I installed it on my new 2022 DL1000 V-STROM250ABS. the handlebar pipe is slightly thicker, so the ThrottleGrip is very hard to use as it is. If the inner surface of the Throttle cone is polished with sandpaper, the ThrottleGrip can be used normally. The impression after 12 hours of long touring is that the grip feels hard due to the thin wall. I used Mesh Gloves at the second lowest temperature setting. The instep is slightly cold due to the driving wind, but the fingers and palms are warm, so there is no problem. View detail

KIJIMA

11 Nov 2022

Grip Heater GH10

Japanese Webike user

4/5

Terrene 700 (2022) attached to

I requested a replacement due to an initial defect. I am satisfied with the service.
GH-10 on Terrene 700 (130mm) It is perfect in
Check the operation and temperature rise change at each level by energizing before mounting.
RedLamp (Strongest) I thought I had confirmed that the temperature was high enough with the Handlebar, but I could not feel the temperature before attaching it, probably because the Handlebar loses heat when attached to the Handlebar. (at Motorcycle's ambient air temperature gauge of 13°C) I will not be able to use it in the middle of winter, but I am a little concerned about it, so I gave it 4 stars. However, I think it will be effective enough until the fall. I think that even a beginner can install this product by watching YouTube. View detail

KIJIMA

07 Nov 2022

Grip Heater GH10

Japanese Webike user

5/5

Best?

The thickness of the grip is comparable to that of the NORMAL, and it is very easy to grip.

I was concerned about the location of the switch, but I can operate the blinker without touching the switch on the grip heater, which is perfect.

Switch ON and it gets warm in 5 seconds! (o^^o) View detail

KIJIMA

07 Nov 2022

Grip Heater GH10

Japanese Webike user

3/5

ESTRELLA requires processing

I installed 130cmType on an ESTRELLA 2009, but it needed some modification.
Even the smallest diameter parts for attaching Accelerator Wire Thailand coils can be used.
It is slightly larger than the OEM Product, and when assembled as is, the Axel is sandwiched between the Holder and the
It's locked up and stuck.
If you are interested in purchasing this product, you can use it by slightly shaving the part where the Thailand coin is threaded.
We recommend that you prepare something to shave
I have had no problems using the system after installation and have been able to use it comfortably.
Grip's design does not fit the atmosphere of ESTRELLA and
The loss of the cushion causes the vibration to be transmitted slightly more strongly to the hand, but this can't be helped.
Once you experience the warmth in winter, it is an irreplaceable equipment! View detail

KIJIMA

30 Oct 2022

Grip Heater GH10

Japanese Webike user

5/5

One Button and it's warm!

We have been using RSThailand Chi electric heating gloves, but with the recovery of the Motorcycle battery connection Cable, we have renewed our winter equipment.
Wear has been replaced with an electrically heated Inner powered by USBMobile Battery.
After all, it is easy not to have to connect wires to Wear.
Gloves are also changed to regular winter gloves and grip heater.
The reason I chose this one out of the many GlovesHeater products is because it has the thinnest Grip thickness. When I grip it, it feels normal and comfortable.
The integrated switch is also good for refreshing.
To install, I have a DUnit in it, so I just connect it. Key Off will also turn off the power. it is necessary to take the Cowl off and on to make the Wiring crawl under the Tank.
The Axel side grip replacement was not difficult because the entire throttle cone was replaced, but the Left Side replacement was very hard to fit. It was difficult for one person to apply force, so it took two people to screw it in.
After installing it, I went for a short run and found that even in the fall when I go out with thin gloves, it is very useful to be able to deal with cold fingertips after the sun goes down with just one Button. View detail

KIJIMA

29 Oct 2022

Grip Heater GH05-2 Winding

Fits: SUZUKI GEMMA, SUZUKI SKYWAVE400 burgman, YAMAHA CYGNUS Gryphus, YAMAHA CYGNUS X, YAMAHA CYGNUS X, YAMAHA CYGNUS X-SR, SUZUKI ADDRESSV125SBasic, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125G, SUZUKI ADDRESSV125, YAMAHA Axis Treat, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA TMAX500, YAMAHA N-MAX, YAMAHA N-MAX, YAMAHA MAXAM, YAMAHA MAJESTY250, YAMAHA JOG125, YAMAHA GRAND MAJESTY400

Japanese Webike user

5/5

A must for winter riding

There is only ON.OFF switch, but there is no problem.
I used to have a Heater with 4 levels of adjustment, but I only used it almost all the way open. if you don't have a Handlebar Cover, I think this is still Large sturdy for Large circa people.
Installation is easy, as the unit can be easily connected to an ACC power source.
The grips feel a little thicker, but you get used to it.
It wraps around and takes like a shoelace, but it doesn't Gap if you tie it tight.
I bought the 95mm one and it is Large sturdy as it is warm enough. View detail

KIJIMA

27 Oct 2022

Grip Heater GH10

Japanese Webike user

5/5

Easy installation

z900rs cafe ARCHI Stainless Steel
It is mounted on Super Bike Handlebar.
Clutch Side is tight in size, but
I managed to get into it.
Harness and other wiring is just the right length.
It's a nice fit.
I thought it would be easy to maneuver, no hassles!
The Grip is also thin and uncomfortable.
When it's cold or Gloves are wet from the rain.
Grip heater is a great help.
I expect it to be durable. View detail

KIJIMA

26 Oct 2022

Grip Heater GH10

Japanese Webike user

5/5

Grip heaterGH10

Overall, Grip heater is a better choice.
It's easy because I don't have to worry about getting in and out of the car.
It's really warm.

It seems to come down to this. View detail

KIJIMA

26 Oct 2022

Brake Lever

Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA MT03, YAMAHA YZF-R3, YAMAHA MT-25, YAMAHA YZF-R3, YAMAHA YZF-R25

Japanese Webike user

3/5

I was asked to do it by an acquaintance.

I bought it because a friend of mine's Motorcycle was bent due to a bump.
I bought this one because it is cheaper than OEM. View detail

KIJIMA

20 Oct 2022

Grip Heater GH10

Japanese Webike user

5/5

Necessities from now on

The LEDs are easier to see than the Switch integrated that I put on before, and the Fit is as good as OEM. Warms up quickly. View detail

Corresponding Left Lever for HONDA Motorcycle

KIJIMA

19 Oct 2022

Corresponding Left Lever for HONDA Motorcycle

Fits: HONDA Benly CD90, HONDA Benly CD90, HONDA diocesan, HONDA Spacey 80, HONDA Journo Clare, HONDA jazz, HONDA gyro X, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA monkey, HONDA livudio, HONDA Livudio SR, HONDA Livdio ZX

Japanese Webike user

5/5

Old Scooter Parts

Used for Eve Smile. I was dissatisfied with the grip and after changing it, it is easier to ride Stress. View detail

KIJIMA

19 Oct 2022

Lever Brake Black

Fits: HONDA Benly CD90, HONDA Benly CD90, HONDA Benly CD90, HONDA Super Cub 70, HONDA Super Cub 70, HONDA Super Cub 90, HONDA Super Cub 90, HONDA DJ-1, HONDA Ape 100, HONDA Ape 100, HONDA Ape 100, HONDA Ape 50, HONDA Ape 50, HONDA Ape 50, HONDA Benly CD90, HONDA Benry 50S, HONDA Benry 50S, HONDA cabina, HONDA Benly CD50, HONDA Shirley 50.

Japanese Webike user

5/5

Old Scooter Parts

Used for Eve Smile I was a little dissatisfied with the OEM Product, after changing to Stress it is easy to grip and fun to drive. View detail

KIJIMA

19 Oct 2022

Lever Brake Barrel

Fits: HONDA NE50 Tact, HONDA XR50R, HONDA Gyro X, HONDA Super Cub 50 Super Custom, HONDA Super Cub 50 Standard, HONDA Super Cub 50 Deluxe, HONDA Super Cub 50 Business, HONDA Super Cub 90, HONDA Smart Dio, HONDA Smart Dio DX, HONDA Zoomer, HONDA APE100, HONDA APE100 DX, HONDA APE100 SPECIAL Knife, HONDA APE50, HONDA APE50 DX, HONDA APE50 SPECIAL Knife, HONDA CD50, HONDA CD90, HONDA CD90

Japanese Webike user

5/5

Old car 6BoltCUB

6Bolt old car CUB I have been wanting to use it for some time and purchased it. It is easy to grip Stress eliminating Touring will be fun. View detail

KIJIMA

16 Oct 2022

Grip Heater GH10

Japanese Webike user

5/5

The sense of unity with Motorcycle is great!

The built-in switch gives it a sense of unity.
The RightHandlebar can be installed by simply replacing the Throttle Wire, which can be done with a little knowledge. The LeftGrip, however, was difficult to install. It was impossible to install the LeftGrip as it was, so I connected the Wiring beforehand, turned on the switch, warmed up the GripBody, applied a thin layer of neutral detergent to the Grip and Handlebar, and inserted the Grip and Handlebar at once. The LeftGrip has a built-in switch, so it may be damaged if it is subjected to excessive force. I don't know how effective it is because I haven't used it in the wintertime, but I think it is Large sturdy because it gets quite hot. View detail

KIJIMA

14 Oct 2022

Grip Heater GH10

Japanese Webike user

5/5

Winter Ride frequency is likely to increase.

It was installed on Kawasakiz900rs along with PMC's Archi TouringHandlebar.
Some handlebars seem to be difficult to insert the grip, but we were able to easily install it on PMC's handlebar.
The KawasakiOEM Grip heater is not warm enough for the price, and replacing the handlebar becomes a hassle, so it is a recommendation to use this product instead of OEM.
Installation is best done by removing the Tank, but we managed to install it without removing it.
I haven't used it in earnest yet, but it looks like it will increase my winter Ride frequency. View detail