Reviews
Fits: KAWASAKI W800, KAWASAKI Versys., KAWASAKI Meguro K3, KAWASAKI Varios II, KAWASAKI Ninja ZX-9R, KAWASAKI Ninja ZX-9R, KAWASAKI Zephyr 750 RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr X, KAWASAKI Zephyr X, KAWASAKI Zephyr X, KAWASAKI Zephyr 400, KAWASAKI Zephyr 400, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Estrella (Disk Car), KAWASAKI Estrella (Disk Car), KAWASAKI Estrella (Disk Car), KAWASAKI Estrella -RS (disc model), KAWASAKI Estrella -RS (disc model), KAWASAKI Estrella -RS (disc model)
It is the zephyr 400 by touch! Clutch lever exchange! When compared from the original manufacturer's product, color changed. However, appearance is completely different only by lever exchange. Degree up is carried out custom and it does.
It is the zephyr 400 by touch! Clutch lever exchange! When compared from the original manufacturer's product, color changed.
However, appearance is completely different only by lever exchange.
Degree up is carried out custom and it does.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
It attached to VT750S. Since the clutch lever was far, it exchanged. Although it was good to have become easy to put power into a lever, probably because the path of an axis does not suit, it somewhat carries out that it is shaky. Since it use
It attached to VT750S.
Since the clutch lever was far, it exchanged.
Although it was good to have become easy to put power into a lever, probably because the path of an axis does not suit, it somewhat carries out that it is shaky.
Since it uses, and was not troubled so much and there was no VT750S in a conformity table, a cramp also complains.
It was slightly regrettable.
View detail
I received its. This is simple clamp switch handle; but its look strange, and the pat is not nice.
I received its. This is simple clamp switch handle; but its look strange, and the pat is not nice. View detail
At the time of large-sized ONRODO, since it changed to the off vehicle although exceeded by the grip heater (volume type), it decided to attach without hesitation. The chalk lever is attached on the clutch, and thickness of XL degree does not suit, bu
At the time of large-sized ONRODO, since it changed to the off vehicle although exceeded by the grip heater (volume type), it decided to attach without hesitation.
The chalk lever is attached on the clutch, and thickness of XL degree does not suit, but ? misses a little, and I think that it was well attached by the insulation lock combination which needed to be processed.
it ran without the glove -- feeling and coming out -- yes, it is not slightly a hard when it is a long distance, although it is and the wind is avoided to touch -- or [ there being no grip heater attachment and ending, if it is ? glove combined use ].
.
.
Are the items which a price is also cheap and can use it so so places?
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
CB400SF Revo is equipped. Since the surface had been somber although it was silver, an authentic positive one exchanged the brake & clutch lever. Exchange was completed simply. It is satisfied with the simple design and the competitive price.
CB400SF Revo is equipped.
Since the surface had been somber although it was silver, an authentic positive one exchanged the brake & clutch lever.
Exchange was completed simply.
It is satisfied with the simple design and the competitive price.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
It purchased by the object for CB750F. Otherwise the object for F was not found but became this. The angle sticks from normal and I think that lighter operation is possible. A using feeling is comfortable, and if it can obtain at such a cheap
It purchased by the object for CB750F.
Otherwise the object for F was not found but became this.
The angle sticks from normal and I think that lighter operation is possible.
A using feeling is comfortable, and if it can obtain at such a cheap price, it is preeminent for cost performance.
Is the choice of normal lost?
View detail
Although it purchased with the strategy which uses together with a grip heater and overcomes cold in order to attach to Ninja250R -- It is not likely to be attached at all. If stay is made even from the hole for the mirrors of a handle, it uses, b
Although it purchased with the strategy which uses together with a grip heater and overcomes cold in order to attach to Ninja250R --
It is not likely to be attached at all.
If stay is made even from the hole for the mirrors of a handle, it uses, but it is right and the interference to other parts --
After all, it was attached with VOX.
Here, the part was deleted here and it was attached only with drilling.
Although it is effective, a design is the touch which a scooter does not suit.
View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200V SPORTSTER72 SEVENTY-TWO, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON SPORTSTER ROADSTER, HARLEY-DAVIDSON XL1200CA SPORTSTER LIMITED, HARLEY-DAVIDSON XL1200L SPORTSTER LOW, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON SPORTSTER SUPERLOW, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON SPORTSTER IRON883, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13
He bought twice 1200R of 04 models. the thing in which this price is cheap at two -- it is a word. As to why he bought it twice, it becomes hollow and is because it has broken. _l~l-lll GAKURI ... (smile)
He bought twice 1200R of 04 models.
the thing in which this price is cheap at two -- it is a word.
As to why he bought it twice, it becomes hollow and is because it has broken.
_l~l-lll GAKURI ... (smile)
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
Clutch levers were also exchanged together with the brake lever. Although it wavered with the lever of silver, the touch and the ease of grasping in which it was good for, appearance changed to, and the circumference of a handle became tight have also
Clutch levers were also exchanged together with the brake lever.
Although it wavered with the lever of silver, the touch and the ease of grasping in which it was good for, appearance changed to, and the circumference of a handle became tight have also said black paint application to mind.
View detail
Fits: YAMAHA XT600E, YAMAHA XT400, YAMAHA XS400, YAMAHA YZ125, YAMAHA XJ650, YAMAHA XJ650, YAMAHA XJ400, YAMAHA XJ400, YAMAHA YZ80, YAMAHA YZ80, YAMAHA XJ750E, YAMAHA MAJESTY250(SG03J), YAMAHA BRONCO, YAMAHA TY250Z TY250, YAMAHA FZR750R(OW-01), YAMAHA YZ125, YAMAHA YZ250, YAMAHA XZ550, YAMAHA XTZ750 SUPERTENERE, YAMAHA XT660Z TENERE
The plating lever for the drum brakes of 4HC found it by the never found thought [ at last ]. When attached, it is comfortable and was also able to use the brakes lock like former. It is considerably satisfied in [ finishing of plating is also ver
The plating lever for the drum brakes of 4HC found it by the never found thought [ at last ].
When attached, it is comfortable and was also able to use the brakes lock like former.
It is considerably satisfied in [ finishing of plating is also very much good and ] itself.
View detail
By having high-throttle-ized KSR110 by the high throttle kit of the kitaco, since the box of the kill switch became obstructive, it equips with this article. This product is in the state where conduction goes out, when a switch is ON, but since the pr
By having high-throttle-ized KSR110 by the high throttle kit of the kitaco, since the box of the kill switch became obstructive, it equips with this article.
This product is in the state where conduction goes out, when a switch is ON, but since the primary configuration is completely in reverse, a switch commits KSR110 exactly the other way around.
Since the switch which can be used for KSR110 is not found even if it searches very much, I want you to also take out with a switch ON the version which carries out conduction by all means.
View detail
It is quite small. To the power source for accessories, it is tight. Permeation of the water from a switch lever part can be prevented thanks to a rubber cap.
It is quite small.
To the power source for accessories, it is tight.
Permeation of the water from a switch lever part can be prevented thanks to a rubber cap.
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
It decided to exchange fronts, since the surface was somber white although the lever of pure silver was attached. Thanks to the comment~L shape after ~ attachment, a lever becomes near and came to go out a clutch more comfortably than before. As f
It decided to exchange fronts, since the surface was somber white although the lever of pure silver was attached.
Thanks to the comment~L shape after ~ attachment, a lever becomes near and came to go out a clutch more comfortably than before.
As for an effect, since it is a clutch lever [ NIGINIGI / clutch lever / frequently ], it is also large that the form of a lever changes a little.
A feeling of fatigue of the left hand after riding on a motorcycle for a long time decreased considerably.
The black lever in design tightens the circumference of a handle, and is sporty touch.
Since [ with the black paint application appropriate for Yasu for a while ], it is * minus.
They are things as it is reasonably priced.
Since the black lever with last thing changes the impression of the circumference of a handle, the ease of grasping is also a recommend.
View detail
Fits: YAMAHA YZF750SP, YAMAHA YZF750R, YAMAHA YZF750, YAMAHA YZF600R, YAMAHA YZF1000R, YAMAHA YZF1000, YAMAHA XJR400R, YAMAHA XJR1300SP, YAMAHA XJR1300, YAMAHA XJR1200, YAMAHA XJ400S, YAMAHA TZ250, YAMAHA TZ125, YAMAHA TRX850, YAMAHA TDM850, YAMAHA GTS1000, YAMAHA FZS600SN, YAMAHA FZS600S, YAMAHA FZR750, YAMAHA FZR400RR-SP
It purchased for the exchange from a pure black lever. There is a handy feeling at an original manufacturer's product and a price practically equal. The touch which is easier to grasp satisfactorily than an original manufacturer's product although
It purchased for the exchange from a pure black lever.
There is a handy feeling at an original manufacturer's product and a price practically equal.
The touch which is easier to grasp satisfactorily than an original manufacturer's product although it is some also carries out an adjuster.
View detail
It purchased feeling the circumference of a handle refreshed. Moro -- it is small -- 3WAY and connection, such as ..., however blinker horn & passing, also remove the membrane of each wiring, that of an easy O price are dramatically as handy as a plug
It purchased feeling the circumference of a handle refreshed.
Moro -- it is small -- 3WAY and connection, such as ..., however blinker horn & passing, also remove the membrane of each wiring, that of an easy O price are dramatically as handy as a plug screw fastening from the bottom, and five starses.
View detail
Fits: HARLEY-DAVIDSON FLHT Electraglide, HARLEY-DAVIDSON FLHTC Electra Glide Classic, HARLEY-DAVIDSON FLTCU Tour Glide, HARLEY-DAVIDSON FLHTCU Ultra Classic Electraglide, HARLEY-DAVIDSON FLHRI Road King, HARLEY-DAVIDSON FLTR Road Glide, HARLEY-DAVIDSON FXST Standard, HARLEY-DAVIDSON FXSTB Night Train, HARLEY-DAVIDSON FLSTC Heritage Classic, HARLEY-DAVIDSON FXSTC Softail Custom, HARLEY-DAVIDSON FXSTS Softail Springer, HARLEY-DAVIDSON FLSTF Fatboy, HARLEY-DAVIDSON FLSTN Heritage Nostalgia, HARLEY-DAVIDSON FXSTSB Bad Boy, HARLEY-DAVIDSON FLSTS Heritage Springer, HARLEY-DAVIDSON FXSTD Deuce, HARLEY-DAVIDSON FXCW Locker, HARLEY-DAVIDSON FXCWC Rocker C, HARLEY-DAVIDSON FLSTSB Crossbones, HARLEY-DAVIDSON FLS Softail Slim
SUPOSUTA XL1200S was equipped. The hand was small, and at the time of touring, although the second half was in the quite hard situation, it has been improved considerably. Since a price is also handy compared with a misumi etc., it is recommended
SUPOSUTA XL1200S was equipped.
The hand was small, and at the time of touring, although the second half was in the quite hard situation, it has been improved considerably.
Since a price is also handy compared with a misumi etc., it is recommended in the direction ! a few also wants to improve the fatigue of a hand for the time being.
View detail
Fits: HARLEY-DAVIDSON XL1200N NIGHTSTER, HARLEY-DAVIDSON XL1200V SPORTSTER72 SEVENTY-TWO, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON XR1200X, HARLEY-DAVIDSON SPORTSTER ROADSTER, HARLEY-DAVIDSON XL1200CA SPORTSTER LIMITED, HARLEY-DAVIDSON XL1200L SPORTSTER LOW, HARLEY-DAVIDSON XL883C, HARLEY-DAVIDSON XL883, HARLEY-DAVIDSON SPORTSTER SUPERLOW, HARLEY-DAVIDSON XL883R, HARLEY-DAVIDSON SPORTSTER IRON883, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13, HARLEY-DAVIDSON Sportster Forty-Eight (XL1200X) 11-13
Although it is a price of one duty of the manufacturer of the other company, it is thought that structure became the thinness of a domestic car and the level quite by the thing, and its operativity also improved. Although the bearing was contained, it
Although it is a price of one duty of the manufacturer of the other company, it is thought that structure became the thinness of a domestic car and the level quite by the thing, and its operativity also improved.
Although the bearing was contained, it was seldom able to feel having become a smooth by it etc.
It is not adopted pure, and if a bearing part is made into color and a price is lowered will be considered.
However, cost performance is dramatically high and a recommend for the first directions and women to ride on a harley!
View detail
Fits: HONDA Super Hawk III CB400D, HONDA CBX400F, HONDA CBX400F, HONDA CB125T, HONDA AX-1, HONDA VRX400 Roadster, HONDA NS-1, HONDA jade, HONDA Steed 400, HONDA Steed 400 VSE, HONDA Steed 600, HONDA Zervis., HONDA Bross 400, HONDA CB750F, HONDA Steed VLS Springer NV400CSW, HONDA GB250 Clubman, HONDA CBX400F Integra, HONDA CBX125, HONDA CBR750, HONDA CBR400F
Since he wanted to make a lever into Black, it purchased. Although I think that the portion of attachment of a wire is troublesome just for a moment, I think that it can do immediately. Although a feeling of a physical disorder was immediately aft
Since he wanted to make a lever into Black, it purchased.
Although I think that the portion of attachment of a wire is troublesome just for a moment, I think that it can do immediately.
Although a feeling of a physical disorder was immediately after changing since a form is different for a while in it being pure, it has got used immediately.
Since structure is also regarded as their being goods good with a price not being so high, I think that it is a recommend to a direction to change a little image of appearance into.
View detail
Fits: YAMAHA XT250, YAMAHA Lanza (DT230), YAMAHA YZ80, YAMAHA YZ250, YAMAHA YZ125, YAMAHA WR250Z, YAMAHA TT-R125LW, YAMAHA TDR50, YAMAHA XT400 Artesia, YAMAHA XT400 Artesia, YAMAHA YZ80, YAMAHA YZ80, YAMAHA YZ80
Since it fell by motorcycle and the lever had bent before, it purchased. Although many levers are emphasizing the difficulty of bending, if it falls by Kami out of whom speed has come too, they will also damage a strong and high-class raw material.
Since it fell by motorcycle and the lever had bent before, it purchased.
Although many levers are emphasizing the difficulty of bending, if it falls by Kami out of whom speed has come too, they will also damage a strong and high-class raw material.
if it is the usual run although I think that an expensive and strong lever is also good -- cheap & -- this product of a certain amount of reinforcement -- enough -- it is not -- I think ?.
I think that a grip feeling and die length are also good exactly, and are goods very good [ considering the balance of a price and quality ].
View detail
A clutch wire goes out, and since it is year ends and New Year holidays, brand-name parts cannot be ordered. Then, although this got, if there is no margin in the wire from an outer, it cannot tie as it is. Slight metal of an outer and inside whic
A clutch wire goes out, and since it is year ends and New Year holidays, brand-name parts cannot be ordered.
Then, although this got, if there is no margin in the wire from an outer, it cannot tie as it is.
Slight metal of an outer and inside which is carrying out the round and round was cut, the die length of the wire was secured, and it changed into the state where it can use somehow.
Since this processing is impossible on the spot, if the wire itself has a margin, they will be very secure items.
View detail