Reviews
For a classical look.
Classical (but not as much as the old cars, 90s style?) I bought it for the purpose of The look is simple and the grip is rather soft, but it is not as soft as Pro grip and there is no squishy feeling like Pro grip. View detail
ติดตั้งง่าย กระชับมือเวลาขับขี่ เดินทางไกลมือไม่ชาครับ ยอดเยี่ยมจริงๆ View detail
I like the feel of it.
I like the bland design and the feel of holding it. I don't like the rugged design, so I like the simplicity of it.
View detail
Cospa is good!
I'm satisfied with the design that provides some vibration mitigation, the feel of the product is not too hard or soft in the grip, not too slippery, and not too assertive.
APE 100, a little short of the Daytona Pipe Handlebar when I put it on. Well, it wasn't that much of a concern.
View detail
It's a grip that grips well! (Lol)
It is installed on CRF150R and used by Motocross and Enduro.
I have had no complaints about the Grip feel on sunny days or even on Muddy's Race. I think that the many taller ribs make it harder to slide.
The wire is used for installation. Parts cleaner is used to lubricate the wire at the time of insertion, but it will not deteriorate after a period of time.
If it falls down, the part of the Handlebar End is easy to be cut off, but I use it by replacing GunGun because it is a cheap one.
I wish I could buy one side of the Axel side and one side of the Left Side as one side is often damaged.
View detail
Grip heater Grip wear and tear measures
I bought this for the Grip heater to prevent Grip wear.
I use them on my BMW S1000RR, and since they are OEM grips with a built-in heater, when the grips are worn out, you have to replace the entire grip unit. Therefore, it is very different from changing to an external grip for 4,000 to 5,000 yen. To install the Grip Unit, use the heat gun to shrink it. When it becomes loose, heat up the heat gun and shrink it again.:Since it is Rubber, it does not compromise the performance of the Grip Parts.
View detail
Soft Grip
I looked for a soft Grip and bought it.
It feels like a Fit in the hand, no complaints!
The only mistake I made was buying the wrong length of Grip and buying a shorter one.
View detail
It can be mounted with a grip heater and is extremely thick.
Grip heater became slippery, so I installed it to prevent it from slipping.
As a result, Grip is good.
But I put it on the Grip heater, which is originally thick, so it became very thick.
And I chose red, which makes it look even thicker.
I immediately bought the Black one again.
It's very easy to install the thing because all you have to do is cover it up and stir it up.
But I didn't have a Heat gun, so I bought one for this.
If you don't have the right tools, you can't attach them, so it's not very cosmetic.
View detail
Great in the grip, satisfying to ride.
Many people have commented on how soft it is.
I was a little apprehensive, but I bought it.
It's actually soft to the touch, but it's not the Level that bothers me, on the contrary, it feels good!
KIJIMA, you do a great job! (Lol)
View detail
It feels good to the touch
The replacement from the slightly larger diameter Grip is much thinner, and the very soft feel of the Grip is This is a feature that tends to twist if the Axel side is not glued properly We recommend you to glue the main body to the body without wiring I will give you further feedback after experiencing its use View detail
It's soft and comfortable
Material is softer than OEMs, so it's more comfortable
However, the Right Side (Throttle side) is compatible with the Throttle holder I think it is important to note that there are
View detail
Exactly
Replaced the OEMHandlebar with a posh SuperLow Handlebar It's an Exactly to 22.2″ Handlebar There is no more texture View detail
Cheap and Simple
i think this is a short product for a for ReplacementGrip
You should always measure the length of the Grip you plan to remove before you buy
View detail
Calm design and moist texture like an OEM
With the use of an external Aluminum Handlebar and an external Aluminum Bar End I chose this Grip because I thought it would increase the vibration around the Handlebar
The texture is quite fluffy, and when strong force is applied to the Grip by pushing and walking, the Grip is twisted, and the I think So I think Wiring is necessary
I have carpal tunnel syndrome and my fingers tend to go numb easily from the tips of my fingers to the palms of my hands, but after using this Grip No numbness of the hand has so far occurred from
View detail
I wanted to use it on my 4MINI …
I bought it because I liked the look of it and it was inexpensive, but unfortunately I stopped using it immediately Factors "Spit The size of the MX Grip is the size of your left hand thumb when operating the Blinker "Spit It's depressing to hit the part When I bought it:it was a mistake to only check the diameter (Φ 22.2mm) and overall length Now KIJIMA Classic mini It is not recommended for the Honda4MINI View detail
Used in 4MINI
It is a Repeat purchase, it is an Exactly size on a Honda4MINI The function and looks are both great I want to use the one I like because it is a place I always touch I'm buying a new one in View detail
Expect durability
I used to use a certain shockproof Gel grip, but I was dissatisfied with its durability and wanted to try another one, so I decided to use it Buy this one
I thought it was a mistake because it was quite floppy, but when I put it on, it was very easy to grip
I could install it without any problem, but it's a little short for GSX-R1000, so the longer size is not necessary I wish I had
Now I'd like to install it on my commuter groms, hoping for durability
View detail
I think it's good Items
I've been reading the articles on the introduction of motorcycles, etc., and it seems that people are using them I also tried to put it on
I installed it myself, but I'm not sure if the Left Side wasn't overheated enough, or if the Grip Heater As I used to use it, it came off
I overheat it again and use it
It's working fine now, I didn't have it on my last motorcycle, so it's 10,000 The grip is decreasing in Km, but this time, it seems to be Large sturdy
View detail
I should have made it
I bought this one because I thought there was an extra edge to put the Grip heater on I ordered the Grip heater without reading the instruction manual and the one I got was not good enough I was disappointed that it was a soft Urethane like material The gap was filled up tightly, but it would have been better to make it from the material of dovetail View detail
Grip heater protection
Installed on a BMW S1000R 2014
For protection of the Grip heater
I had the shop do the installation
I think the feel is almost the same as NORMAL when you grip it
View detail