Reviews
This is good.
The shape of the mirror is designed to avoid the arm holding the handlebar, so the visibility is surprisingly good, and the bracket is thin, so it may be good to be less assertive.
The Mounting Base is a little large, so I adjusted it with a washer so that there would be no wound left on the cowl when tightening it.
View detail
It can also be used on the lower road!
I bought it on impulse, thinking that it would be good if I could use it mainly on downhill roads. Surprisingly, my right hand became very comfortable. I have heard some people say that they can't use it because it slides too much, since the grip varies depending on the large size and texture. In my case, it was just right. So, if you feel it is going down, you can easily put it back up. It almost never comes down, though. This is a great buy! I wish I had tried it sooner! View detail
Fits: HARLEY-DAVIDSON FXLRS SOFTAIL LOW RIDER S, HARLEY-DAVIDSON FXLRST SOFTAIL LOW RIDER ST, HARLEY-DAVIDSON FXRST SOFTAIL LOW RIDER EL DIABLO
Pull back easily
It is just right to be able to pull back easily without changing wiring.
If this isn't enough, you could replace the Riser and raise it.
It's cheap and helpful.
View detail
Fits: KAWASAKI Ninja ZX-25R KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE
Great for cold winters!
I use Heater because it's cold in the morning.
Adjustable and comfortable.
View detail
KIJIMA
Grip is the one! This is the one to choose! View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZR-7S, KAWASAKI ZR-7, KAWASAKI Z750S, KAWASAKI Z1000, KAWASAKI ER-6n, KAWASAKI ER-5, HONDA CBR650RA, KAWASAKI Versys 650, KAWASAKI Ninja ZX-6RR, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-14R, KAWASAKI Ninja ZX-14, YAMAHA FZR6, YAMAHA FZ6R, YAMAHA FZ6, YAMAHA FZ10, YAMAHA FZ09, KAWASAKI Tengai, KAWASAKI ZRX1200 DAEG
Appearance Refreshing
It's warm and looks simple, so it's great. View detail
Good design and ease of use
It was used for YAMAHA's DT250.
The design of this one is a Grip using VINTAGEMotocross, and it looks SO good.
In addition to its appearance, the grip is the most comfortable! The hand does not shake even when driving on rough roads, allowing you to drive with peace of mind.
The other day off-road driving was no problem!
View detail
Fits: HONDA VT750, HARLEY-DAVIDSON Electra Glide Electra Glide FLH, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESportsSuper Glide Sport FXDX, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDECustomSuper Glide Custom FXDC, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESuper Glide FXD, HARLEY-DAVIDSON Electra GlideSportsElectra Glide Sport FLHS, HARLEY-DAVIDSON Electra GlideStandardElectra Glide Standard FLHT, HARLEY-DAVIDSON FLHTCElectra Glide Classic FLHTC, HARLEY-DAVIDSON FLHTCU Electra Glide Ultra Classic FLHT, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR1100, YAMAHA XV1600WILD STAR, YAMAHA BOLT, KAWASAKI VULCAN DRIFTER400, KAWASAKI VULCAN900 CLASSIC400, KAWASAKI VULCAN800 CLASSIC, KAWASAKI VULCAN800 DRIFTER, KAWASAKI VULCAN800
Good heating grips!
It's a really good product. Both the finish and the design are excellent. Thank you for your prompt delivery. I recommend this product to others, too View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90
Easily attachable
During the restoration process, the grips were covered with mold and were so dirty that wiping them off with a military hand did not help, so I replaced them.
Moreover, the CUB-specific Quantity:Pair (for Left and Right) I cut it out and measured the thickness, because it seems to be the same thickness. It is written that the thickness may differ depending on the year and grade.
My vehicle is Quantity:Pair (for Left and Right) They were the same thickness. Thus, the choices were narrowed down.
The accuracy was slightly smaller than the Single Item measurement, so I blew on Brakes cleaner, pushed it in, and finished.
We have used this product in the past, and it is a trusted manufacturer, so we are comfortable with it. Grips are consumables, so we replace them when they wear out.
View detail
KIJIMAGrip sch RingTube
Grip heater protection and electronic Throttle is heavy so I wanted to make the Grip thicker.
The length and thickness are just right.
View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
Required for Northeast Number.
The grip is so thin and natural that you don't even notice it has been replaced. View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA650, YAMAHA CYGNUS X, YAMAHA CYGNUS X SR, YAMAHA DRAGSTAR250, YAMAHA YZFR3, YAMAHA YZF-R25, YAMAHA YZ65, YAMAHA YZ80, YAMAHA YZ85, YAMAHA YZ450FX, YAMAHA YZ250X, YAMAHA YZ426F, YAMAHA YZ250F, YAMAHA MAJESTY, YAMAHA YZ450F, YAMAHA YZ250FX, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA XT250
Large satisfied
I have been asked by my daughter for a long time, but due to the severe cold weather this year, I bought it. (Scooter) So I had a hard time removing the cowl, but I am Large satisfied with the contents of the product. I have several other motorcycles, so I plan to purchase & install them one after another. I think it is very cost effective! View detail
Classic Mini Rubber Grip
This is the first time I have purchased this product.
Fit feeling is good.
View detail
Much easier to operate.
This, this!
The handlebar on the RH975S is difficult to operate and dangerous for my system!
When the handlebar is replaced with this handlebar, the maneuverability is no different from that of a domestic motorcycle.
Also, you don't have to change the length of the hose or anything, so you don't have to pay extra Gold.
However, it was difficult for me to change it myself, so I asked my local Honda to do it for me.
I also had Clutch and Brake lever changed. This cost 6,850 yen including tax!
If you take this to a HD store, they will definitely charge you 3,000 yen.
Compared to domestic motorcycles, which have lost their individuality
Harley is a Motorcycle that is unique but built to cost Gold, and United States has put in a Gold flying system here as well. It is truly a terrific thing!
View detail
Fits: HONDA PCX150, HONDA PCX150, HONDA PCX125, HONDA PCX125 Special edition, HONDA PCX125, HONDA PCX125, HONDA , HONDA CT125 HUNTER CUB, HONDA CT125 CT110 HUNTER CUB, HONDA PCX160, HONDA PCX150, HONDA PCX150, HONDA PCX, HONDA PCX
CT125Grip heater
The installation was large and sturdy enough to replace the Motorcycle Grip and allow for some electrical wiring, and the wiring length is universal, so it could be installed if the wiring was handled. The feeling is very good because it can be operated without releasing the hand from the Grip. The grip feels slightly thicker than the NORMAL, and the all-around heat seems to use a lot of power, so it may be better for the battery to lower the temperature setting once the Grip is warmed up. View detail
Fits: SUZUKI B-KING, SUZUKI BURGMAN400, SUZUKI BURGMAN650 , SUZUKI GLADIUS, SUZUKI GSR250, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSX250R, SUZUKI HAYABUSA, SUZUKI KATANAGSX250R, SUZUKI SV650, SUZUKI V-STROM1000, SUZUKI V-STROM250, SUZUKI V-STROM650, SUZUKI V-STROM650XT
good quality and price
It makes install Kijima grip heater easier, i can install throttle grip without addhesive. I used Kijima GH10 before, it was good, but little bit play on the throttle due to the optional gear parts, but now with this tube there is no throttle play. I used several Kijima products until now, they supply aftermarket parts with the great quality and decent price. I think they are smart, do hard work and one of the best motorcycle aftermarket product company. View detail
Fits: SUZUKI GSX-R750, HONDA CBR600RA, HONDA CBR300R, HONDA CBR250RR, HONDA CBR250R, HONDA CBR1100XX, HONDA CBR1000RR-R, HONDA RVT1000R, HONDA NC750XD, HONDA NC750X, HONDA Monkey125, HONDA GROM, HONDA FORZASi, HONDA CTX700ND, HONDA CTX700D, HONDA CTX700, HONDA CBR600RR, YAMAHA FZ6R, HONDA CB500F, HONDA CB500FA
best grip heater
This is 3rd time i use Kijima grip heater. I think this is the best grip heater, it is thin as original grips and included aluminum tape helps hold the grip quite strongly on the handlebar without addhesive, of course need to make effort little bit to install. View detail
Raw Rubber grip… I like it!
After reading the article by Webig, I thought Raw Rubber might be good … and since it was time to replace it, I chose it.
I have always thought that raw rubber is inexpensive and is not as good as branded products such as Pro grip's.
As the article says, both the grip and vibration absorption are quite good.
However, the durability of Raw Rubber is not so good, according to the review.
I wonder how long it will maintain this feel after use …?
But the feeling after starting to use it is really good.
If you have never used it, please try it once.
View detail
Fits: HARLEY-DAVIDSON FXDX DYNA SUPER GLIDE T-SportsSuper Glide T-Sport FXDXT, HARLEY-DAVIDSON XL1200C SPORTSTER 1200SUPER Low SuperLow XLT, HARLEY-DAVIDSON XL883SUPER Low SuperLow XLL, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Seventy-TwoSportster Seventy-Two XLV, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSportster Forty-Eight XLX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200 Forty-EightSPECIAL KnifeSportster Forty-Eight Special XLXS, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSICFLSTF FATBOY Lo Fat Boy Lo FLSTFB, HARLEY-DAVIDSON FLSTC HERITAGE SOFTAIL CLASSIC BreakOutBreakout FXSB, SUZUKI BOULEVARDC50, HARLEY-DAVIDSON Electra GlideElectra Glide FLH, HARLEY-DAVIDSON FLHTCUElectra Glide Ultra Classic FLHTCU, HARLEY-DAVIDSON FLHTCElectra Glide Classic FLHTC, HARLEY-DAVIDSON Electra GlideStandardElectra Glide Standard FLHT, HARLEY-DAVIDSON Electra GlideSportsElectra Glide Sport FLHS, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESuper Glide FXD, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDECustomSuper Glide Custom FXDC, HARLEY-DAVIDSON FXDX DYNA SUPER GLIDESportsSuper Glide Sport FXDX, HARLEY-DAVIDSON FLHXStreet Glide FLHX, HARLEY-DAVIDSON XL1200C SPORTSTER 1200IronIron XLNS, HARLEY-DAVIDSON XL1200C SPORTSTER 1200Custom Custom XLC
Buns Grip
It is easy to grip and Grip works well. View detail
Fits: HONDA SH125, HONDA NX250, HONDA XR650L, HONDA LEAD125, HONDA XR250L, HONDA CBR900RE, HONDA DIO110, HONDA CRF230M, HONDA CBR900RR, HONDA CRF230L, HONDA CB900F, KAWASAKI Z1000, HONDA CB600F, HONDA CB1300 SUPER FOUR, HONDA Spacy110, YAMAHA YZF-R3, YAMAHA XMAX300, YAMAHA NMAX155, HONDA Forza300, HONDA CB150R
On a 2011 CBR600RR.
I bought it because I didn't want to do thick Gloves in the winter.
The installation was done by Webike's Support store with direct shipping.
In the case of the CBR600RR, I gave up on it myself because it is Large strange to remove the FI side of the Accelerator Wire.
I have used it and it heats up so much that it is hot at the strongest Level.
My wish to use thin Gloves in winter was fulfilled as long as I warmed the back side of my hand from time to time.
There is no possibility of mishandling during Blinker operation.
View detail