Reviews
Good manufacturing, as good as OEM.
It can be tightened with confidence.
It is well made, so let's tighten it up with a proper Band.
View detail
Repair of external Exhaust System.
The Band of Earls Gear's Slip-on Silencer that I bought used is not usable because the Screw does not turn in RustRust.
I checked and it was the same as this product.
The band itself is stainless steel, and the screws are iron, so Copa Coat is applied to the screw threads to prevent biting and rust.
It can be tightened normally and looks normal. No exhaust leaks, probably because it is evenly tightened.
I thought it was a good, safe product.
View detail
KIJIMA Stainless Steel Exhaust Band
I used to use a different band, but when I tightened it, the bolt diameter was a little thin and it was not strong enough.
After a certain amount of use, it was easy for the screws to be ruined by heat and tightening.
This Band has a slightly thicker Bolt and has no strength problems, so this Band is now used.
View detail
Used for I.D. 60.5Φ.
63-68mmSize is used for Exhaust System with inner diameter of 60.5Φ.
Looking at the cost of Bolt's surplus, it would have been better if it had been a little smaller.
However, there is no problem at all in fixing it, so I am satisfied.
View detail
Material:Stainless Steel is good
I made a mistake with the size, but I think it is a very good product, Stainless Steel and it won't rust, and considering the burning thing, it is a Material:Stainless Steel exhaust pipe and silencer with band and material:Stainless Steel is a good choice. View detail
Used in SR400
Material:The exhaust pipe and silencer are made of Stainless Steel, so the color of the Plating Exhaust Band is different from the Plating Exhaust Band, but the Material:If the band is made of Stainless Steel, the burnt color will look natural. View detail
easy to get
When I installed YOSHIMURA's Slip-on Silencer, I am a stocky person, and I broke the attached Clamp band by holding the Torque wrench too tight for some reason, perhaps because of the installation angle.
It takes time, but I looked on the Net to order from YOSHIMURA and found that KIJIMA's products are identical to YOSHIMURA's.
It was easy to obtain and inexpensive.
View detail
Silencer Fixed
I purchased this product for my car car Silencer-less Toa. It works fine. It can be fixed tightly. View detail
Quality ○○
I only used Rubber because Band did not fit. I did not use it, but the quality of the Band itself was solid. View detail
Used for 60mmSize Silencer
[How is it used?
I used it to fix the external Silencer on my TZr50R.
Silencer is 60mm, but I bought 70mm and Band because I saw that there is a gap at the Bolt fixing point when I put Elastic band.
Was the one you received as per Image?
It's hard to tell because there's no explanation, but as you can see in the picture, it comes with the BandBody and a set of bolts for installation.
There is no BALIetc. and it can be used as it is.
Was the installation difficult?
KIJIMA for Silencer heat resistant Elastic band (https://www.webike.net/sd/1033907/) I used a 60mm Silencer, but it is a bit oval and there is a little gap between the two.
Originally, even if it is not fixed, it is attached rather firmly and is a supplementary fixation, so it is enough for me personally.
How was your experience with it?
Originally, the previous owner also seemed to run without fixing, and there was no particular problem in running, but the sense of security increased.
Also, I personally like the way it looks better fixed, so I'm happy with it.
How did it compare to other products?
Compared with other Silencer band etc., it is inexpensive and the SizeLineup is abundant.
However, I thought that it would be better if there was a middle lineup of 65mmetc. for using Elastic band.
【Review】
This Silencer band is inexpensive but comes with a Bolt and is ready to use.
As long as it doesn't fall over, I don't think there will be any problems with durability.
View detail
It's safe to say we're a trusted Manufacturer!
When I installed the exhaust system of YOSHIMURA, the clearance of the included exhaust band was limited and it was not easy to work with, so I bought a larger one.
I used the Bolt that was included in the Exhaust System because it seemed to hit the Swing Arm.
View detail
I used it for STREET TRIPLE!
When I installed SCORPION's Silencer to STREET TRIPLE, the Band was plastic, and when I rode a little hard, it was broken in seconds. So I bought this band and installed it. The feeling of stability was preeminent because it is made of Stainless Steel. View detail
Stable Material:Stainless Steel
I installed it on my Kawasaki ZX-11.
The exhaust band that came with the motorcycle when I bought it was ripped off during a previous touring session, so I decided to use the durable material:I chose Stainless Steel and with Brace.
Material:I heard that it often breaks by the vibration when the band is made of aluminum.
As you can see in the image, I was reinforcing it with Tie Wrap, but sadly the other side was in the same situation.
In that respect, the Stainless Steel Exhaust Band is a great big deal, and I was able to feel it again.
The supplied Rubber is a bit long, so I cut it and used it.
View detail
kijimaKIJIMA Stainless Steel Exhaust Band
The other day, I bought an Exhaust System and squeezed this product
I bought it. Actually, I installed,
I could install without exhaust leaks.
I think that it is better to tighten it quite tight when tightening the Band.
Also, in case it becomes necessary, you must make this product
I wanted to use it.
View detail
Exchange from Super trap's OEMBand
It is an exchange from OEMBand of Super trap.
The reason is that Bolt of OEMBand is Inch size.
Since the approximate value is 11 mm, it was tightened with 11 mm Box wrench, but workability is bad
Since the quality of Band itself was also questionable, I made it to Band of KIJIMA.
Improve quality by reducing the width of two sides to millimeters. It is tightened to Smooth. I'm glad I bought it.
By the way, painting Thread compound makes Smooth and rust prevention.
Other companies also have similar cheap Band, but because the board around Large Bolt is omitted
I am a cigar. If you tighten it strongly, distort the Pipe
We do not recommend as there is a possibility.
View detail
Satisfied with both quality and price
I used it when installing an external Slip-on Silencer.
Unfortunately Size did not suit, but the product itself was sturdy and texture was good.
I'd like to purchase another Size's item.
View detail
Rubber somewhat shifts due to vibration.
It was used for Yoshimura cyclone exhaust system of SR 500. I think that it does not shift at all if it is a motorcycle with less vibration. In my SR 500 case Rubber slightly shifts due to vibration of the Exhaust System, so we corrected it. I measured the size of the Exhaust System by MAJOR before buying it. View detail