Reviews
That's impossible.
Sale item but missing for over a month.Cancelled. View detail
inferior goods
I ordered it because I liked the design, but when I opened the package, I was surprised to find that the surface was uneven like a used product. It's impossible to pay high gold to remake it ?? View detail
Fits: HONDA CABINA 50, HONDA CABINA 90, HONDA LEAD 100, HONDA JULIO, HONDA TACT, HONDA LEAD50, HONDA LEAD50, HONDA TOPIC, HONDA LIVE DIO ZX, HONDA LIVE DIO SR, HONDA LIVE DIO J, HONDA LIVE DIO S, HONDA LIVE DIO J, HONDA LIVE DIO, HONDA LIVE DIO, HONDA BROAD50, HONDA BROAD 90, HONDA DIOFIT, HONDA SUPER DIO XR, HONDA SUPER DIO ZX
Control voltage is too high.
After installation, I casually applied a tester to the battery and found that 16V was output!
I thought it was quirky and expensive, so I measured it and found that both Regulator and Battery
Idling (1600 rpm) The control was at 16V at 4000 rpm and 17.5V at 4000 rpm.
This is not usable!
Idling when I put it back in the OEM that I removed it from. (1600 rpm) The voltage was 14.5V at 4,000 rpm and 16V at 4,000 rpm.
Wasted... Worst of all...
View detail
Fits: KAWASAKI ER-6F, KAWASAKI ER-6N, KAWASAKI NINJA400, KAWASAKI NINJA400R, KAWASAKI NINJA650R, KAWASAKI VERSYS, KAWASAKI W800, KAWASAKI Z750, KAWASAKI Z750S, KAWASAKI Z750S, KAWASAKI ZRX400, KAWASAKI ZX-9R, KAWASAKI ZXR400, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI ZZR600, KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr χ
Inaccurate information on the website
The information on the website say that it is suited for Ninja 400 13-21. I find it is unable to install to my Ninja 400 2020. I think the lever is for the old version of Ninja 400 but not suited for the new one. It is a little bit misleading. View detail
![SPI-H19 Shift Position Indicator Exclusive Kit [for CB400SF H-VTEC SPEC 1/3]](https://img.webike-cdn.net/catalogue/images/41170/protec001_TS.jpg)
Fits: HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR
I received a damaged product and it cannot be used after installation according to the instructions. I also shipped a broken monitor without QC.
Received damaged goods, which cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC ---------------------------- ------------------------------- I received a damaged product and it cannot be used after installation according to the instructions. Even the broken monitor will be shipped without QC. Powered by Google Translator View detail
It was an initial defect.
When I tried to install it immediately after receiving it, it was blinking ChicaChica and I could not use it. I thought my motorcycle was bad, so I ordered another product from Amazon and installed it and it lit up without incident. I would like to return it as soon as possible, but I have not received any response from Webig! Amazon is much more reliable. View detail
failed to pass inspection
Less than one year after replacement, some of the bulbs went out and the Stop became non-lighting.
Although I thought it was faintly on the day before the inspection, it was not lit on the inspection line.
Even if we can discount it to individual differences, the quality control is so poor that we will refrain from using the same Manufacture's products in the future.
View detail
It's shit.
I purchased it because of the mounting diameter Φ54, but the actual size Φwas only 45.
I couldn't get a direct fit on my SR400 CVcarburetor. It sucks. I tried to force it on and it deformed and I can't return it. It is a real piece of shit.
View detail
![[G-Series]Seat Assembly](https://img.webike-cdn.net/catalogue/images/120000/1_TS.jpg)
Myoga Seat
I can't get the device to work at all and I'm returning it, worst case scenario. View detail
Fits: HONDA CBX125F, HONDA NSR250R, HONDA CBR250R, HONDA VFR400R, HONDA Integra, HONDA CBR400R, HONDA SUPER BOLDOR, HONDA CBR300R, HONDA RVF400, HONDA CB400SB, YAMAHA TZM50R, YAMAHA YZF-R125, YAMAHA TZR250, YAMAHA YZF-R15, YAMAHA YZF-R25, YAMAHA FAZER, YAMAHA FZR400RR, YAMAHA YZF-R3, YAMAHA YZF-R6, YAMAHA XJ6
First MirrorBlinker installation
I put it on a yzf-25r early model.
Screw holes don't meet at all, so I have to rebuild them.
It must not be done. It is absolutely impossible for an amateur.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250 RALLY S, HONDA CRF250L, HONDA CRF250L S
(Current status) Dress-up 90%, functionality 10%.
SP Tadao It is a combination with PowerBox Pipe
The combination is not recommended by the respective Manufacturer and
Installation is solely under personal responsibility.
Gasket between Exhaust pipe and Silencer pipe
SP Tadao PowerBox + Normal silencer is not required.
Normal pipe + YOSHIMURAExhaust System
When
Installation Instructions Manual for each product.
Tentatively assembled.
It doesn't seem to make much sense to put it on.
Gasket was not used to do the work.
Installation takes just over an hour.
It is better to temporarily assemble the silencer band & bracket first to make progress.
The sound is LARGER than NORMAL
The sound quality is not as caged as that of NORMAL, and it has a high, clear sound.
I can feel the change itself.
I feel a bit concerned about warming up my own Apartment on the bike parking lot!
As for functionality, I just did a short run around the neighborhood,
at present
I have not been able to experience the same power output increase etc. as when the PowerBox was installed.
■Personal Evaluation
Dress-up 90%,
Functionality 10% (*Contributes to weight reduction, although no output increase can be felt)
So I have to say that Cost performance is low.
If you have a problem with Gold, it might be the first Parts you release...
View detail
Quality is poor for the price.
It is a reasonable price, but I don't think the quality is good. There were welding spatters all over, BALI all over the part where the Bolt is inserted, and even scraps from cutting the Screw. View detail
useless
It is useless unless you use a filter. Moreover, if you use it for a long time, the fuel will not stop. Stable Chinese quality. View detail
Fits: INDIAN MOTORCYCLE 1130 SCOUT, INDIAN MOTORCYCLE 1130 SCOUT BOBBER, INDIAN MOTORCYCLE 1000 SCOUT SIXTY, HUSQVARNA VITPILEN 701, HUSQVARNA VITPILEN 401, HUSQVARNA TR650 TERRA, HUSQVARNA SVARTPILEN 701, HUSQVARNA SVARTPILEN 401, HUSQVARNA SM 510R, HUSQVARNA SM 510R, HUSQVARNA SM 450R, HUSQVARNA SM 450R, HUSQVARNA SM 400R, HUSQVARNA NUDA900, HUSQVARNA NUDA900R, HUSQVARNA 901 NORDEN, HUSQVARNA 701 SUPERMOTO, HONDA XR650 VIGOR, HARLEY-DAVIDSON 1250 PAN AMERICA, DUCATI 800 SCRAMBLER
I was attracted by the Gold color and bought it, but… I was not sure if it would work or not.
I tried replacing it with a Gixxer 250 Rear pad, but the braking force is much weaker than OEM and relies on the Front brake. it may be a compatibility issue with Caliper, but I can't get used to it, so I'm going back to NORMAL. View detail
Shipment was more than 2 month on the way. Webike didn´t help with customs-problems, high taxes comes above !!
This was my absolutelly bades experience with shopping in internet. The Brempo P4 was more than 2 months on the way. Webike did only say look on the tracking, no more help. The article was 4 weeks in customs in frankfurt, many email an phones later ist was shipped to other customs and i have to start discussion here again. Then a lot of taxes for customs and import-taxes and i have to take a customs-specialist to do the import-process. At the end it was much expensive than in Germany. No good support from Webike and also Paypal could not help. I would say dont buy here!! View detail
Lack of good product Level is low.
Used on a SEA BASS VST 650. I tried riding at night with it on, but it was dark. It is just too dark. Also, the optical axis is a little bit off. So, when I adjust it to the lower side, the difference of optical axis between high beam and low beam is very different. PIAA or Ray Brick (Stanley) I would not recommend purchasing anything other than the 2-wheel dedicated LEDs from I think the next best choice would be SYGN HOUSE. By the way, I have purchased SYGN HOUSE twice in the past, but the low beam ran out after about 1.5 years. I hope this will help you in your purchase. View detail
It doesn't make it a pontoon in the first place.
I had checked the 8BK-md47 many times with the staff before purchasing it to make sure it was really large and sturdy, but it was not easy to install as there was quite a bit of modification required.
Also, the design of the Silencer in the product image is different, and it is a mystery why this is not checked and changed every time.
First of all, the fixed bolt hole of the middle pipe is 20mm gapped to the Right when viewed from the front, a position that cannot be corrected by compensation.
The Silencer is not fixed to the fixed bolt hole because it interferes with the RightBlinker on the Rear, so I bought a Bracket and modified it to fit with the Bracket. The exhaust port is directly behind the License Plate, so it's really lame.
Why put a Manufacturer's product on the list that does not seem to conform?
And after confirming it many times, why did they respond as OK?
I don't know if the Staff here is too ignorant or appropriate, but I guess it is a company that can't help itself.
View detail
It doesn't fit.
I applied it to Tank and it didn't fit.
Returned immediately.
View detail
Not functioning.
It goes crazy quickly; about one second a week.
The Double-sided Tape that is attached to the Bracket must be removed to replace the battery.
Really useless. The great people who put out GOSign should try to use it properly!
View detail
Not usable, even COMPRyans in Manufacturer?
First of all, use iPhone for Navigation in Touring, Camera and other corruptions. (Mechanical anti-shake rather old iPhone) of
Purchased this product considering the possibility.
Image was purchased with the intention of being able to use Navigation on the iPhone instead of the Goo GRUMap and other devices.
First of all, as for the product packaging, etc., it is cheap with a Chinese flavor, the inner box with foil stamping but PeLePera, and the outer box is also difficult to understand the product description (This is true for HP as well.)
The quality of the product body is as follows:First of all, two LCD protective films are attached to the body.
The one with the Manufacturer logo is easily recognizable, but there is another one pasted below it.
Also, this QUALITY must be low.
It is very dusty in new condition and looks like a protective film on a smartphone that has been applied in a messy manner.
There are no instructions on how to install anti-theft brackets, etc. The Instruction Manual is almost completely silent, explaining only that you can use it by connecting ACC, Plus, and Earth.
So, what are my impressions of Body's use?
First, the screen size should be measured in advance.
The body size is almost the same as that of the iPhone 14, but like the old LCD Monitor, the bezel portion of the screen is large, so the display portion is much smaller than the body. (Design that feels old-fashioned)
It is also very thick. It is about the thickness of 2.3 cell phones stacked on top of each other, making it very bulky.
And when you use it. First, the Touch panel Response is
It's slow as shit.
It is useless. It's so bad that you can't operate it while driving, but it doesn't make you think about it.
I made the mistake of thinking it was going to be the same as an iPhone that costs about 150,000, but it's soooo bad.
And even if I operate it with my bare hands, it taps on different parts of the board.
Cheesy electronic sounds and Manufacturer logo displayed when powered on
No, you are not such a proud Manufacturer, Small one hour to see if you can't turn it off.
The most discouraging thing about this is that it doesn't connect to my phone very well.
And, due to the radio wave law, the connection cannot be established for 60 seconds after startup.
Now, do you leave your motorcycle in place for 60 seconds after starting the engine each time?
Is your neighborhood Large sturdy?
Or do I leave the Headlight on for 60 seconds without applying Engine?
Is BatteryLarge sturdy?
I contacted the Manufacturer about this.
It's on the website. (W52 indoor /W56 outdoor only; it does not say that it cannot be used for 60 seconds. Are you telling me to check the radio laws myself?)
If you make a W52, you don't have to wait. But it's illegal, so use your own judgment and do something illegal.
Huh, the Manufacturer recommends illegal activities to the User?
I bought it because it was reasonably priced and had just been released.
The website and product descriptions are appropriate. Packaging, quality control, and after sales are all appropriate and pokey.
This is the first time I have purchased from a Manufacturer, but I would not recommend a Manufacturer that is not well-known.
It's been a long time since I've had a chance to make an impression since the sale of the property was successfully finalized.
I wish that one less person would buy this product.
View detail