Reviews
Small type and high performance, the best of all worlds!
I used to use the other company's products, but when I saw the DID Maintenance Video Distribution Site, I decided to use the I bought it (Laughs)
The most important thing is to be able to check the status of your crimp
Also, it has an excellent storage capacity with Small Type, and when it is damaged, you can get the parts only It's something you can do
View detail
This is a part that you absolutely must have a spare.
Even if you use it carefully, it will always break due to Gold genus fatigue. This time, it broke without a sound at the stage of not applying Large force.
If this happens after you turn off the Chain, you'll be left with no way to chain the Motorcycle, so you'll need to keep a spare 1 pc on hand at all times.
Large How many crimped bodies do you have to reach the limit? I wonder if the 20 or so Chains were Crimped because they are shared by an unspecified number of people?
View detail
It's cheap now! (ROFL) A
It's been neglected on my wish list for years, but now it's less than half price for the end of the year Thanksgiving specials
I didn't even have Gold, but I suddenly popped it up
The cheaper ones will be ruined sooner or later, so it's probably sturdy because it's in the form of Both Sides to receive them
View detail
Perfect for DIY!
ChainManufacturer manufacture for ease of use and reliability
That said, the first one I bought was a manufacturing defect!
The 27mm two-sided width is a mess, and Glasses Wrench (BOXEND) did not come in
You should check each part for any problems when you buy it
I contacted the DID and they politely offered to replace it, but the store where it was purchased
I had to return the gold and buy it again
The Manufacturer has an easy to understand video on how to use it, and
The Instruction Manual itself is easy to understand and can be used for the first time
In addition to this product, you will need a 27mm and 19mm Wrench
The 27mm Wrench can be used as a handle so that the Combination and Glasses can be used in place of a handle It's good
The 19mm is used for pin removal, crimping, etc., so it is not necessary to use a socket such as Ratchet You can also wrench
Before removing the pins, use a sander to remove the head of the pin, so the tool can be removed lightly It will last for a long time
Crimp just closes off and Crimp is over, and we are aware of the lack of Crimp and too much Crimp It's very good that you don't have to
Crimped properly because it is a component that can lead to a Heavy Duty accident If you choose ChainManufacturer's
It's safe
DID's Chain Cut & Crimp tool, which is kept at an affordable price, is quite Recommended
View detail
Very easy to use and a solid Tool
Chain replacement... I've been riding motorcycles for a long time, but I don't get to experience it very often The scene
If you ask at the shop, it costs about 3,000 yen But if you bring in the chain, it costs twice as much, so you can get the chain at a lower price It's actually not that cheap when you look at it as a whole
If that happens, why don't you just buy the Tool yourself and replace it yourself? Even at a price of $10,000, you'll get your money's worth if you replace it twice! So, I decided to buy it... By the way, I don't know how many years it will be before I replace it a second time
Now for the comfort level, Outclassing, as Cutter and Crimp are separate products It's really good to be able to do both
The tools that can be obtained for around 3-4,000 yen on the net for various searches, such as amazon.com, have a lot of accuracy and I have some concerns about the strength, but this is a non-issue
The replacement procedure is posted on the Manufacturer's Page with a video, but this is the It was the deciding factor
Very polite and easy to understand... so much so that the actual work feels a little too polite and crudely done It was (Laughs)
I used it on my D.I.D. 520, and both Cut and Crimp were easily and accurately completed, buy it and Thank God! This is a Tool that can be said to be (I'm going to have to change the Chain more often to get the original
In addition, it is convenient that Cutters can be placed in the tube of the handle It's nice to be able to fit all the tendency parts into one Tool This kind of concern was also a good impression! 。
View detail
I am satisfied
I bought this for the maintenance of my Small TypeMotorcycle It is usually easy to use and I am self satisfied with the simple and cool shape If it breaks, I would buy the same one again View detail
Implications of first use
I've never done a Chain exchange before
Used while checking various things
After shaving the head with a sander, Pin extrusion is easy I had to check it over and over again, because when I thought about it, it only goes as far as it can go (laughs) Could it have been any messier? (Laughs)
Crimp in moderation
I bought it, so from now on I'm going to use VANVAN!
View detail
It is the chain tool of number 1 Recommendation
It is more compact and easy to use than the general chain tool You need a 19mm and 27mm glasses wrench. 19mm is a Ratchet If you have glasses, it's a Recommendation. 27mm is MONKEY Wrench is also good enough There is a video explanation of how to use it, and the Instruction Manual is easy to read and is suitable for beginners It is also Recommendation It is a thing that the size used is limited, but it is a thing that the size of my motorcycle is limited If you don't have a problem, it's OK View detail
Easy to use
Cain of Chain, press-in of Plate, Crimp of Pin, easy to use without hesitation.
Working while watching YouTube's commentary video, even the first amateur is easy.
View detail
No problem with the product
Unfortunately for the items that arrived at the beginning we did not enter 27 mm tool with defective items returned.
Wae Big's response was quick and good.
There was no explanation and no apology on this side for defective items of person in charge of DID,
The correspondence of the person in charge is the worst..
I thought the person in charge was that degree.
On the other hand I would like to model as a teacher.
Whether the person in charge does not feel that he carries a signboard of the company is questionable.
As a company as one of many items,
Whether the customer did not think about the fact that one of the products leads to all the evaluation,
I doubt it..
I am making a good product,
I do not notice that the image of the company as a whole gets worse due to the correspondence of only one person in charge,
The person in charge wants to work with sense of crisis.
View detail
Is good
Although there is, there is a crimp Pin, pulling out Pin, when you caulk, you can hang out with Pin and break it .... Is it natural?. When crimping, I have to reverse it properly. View detail
It is a complaint-free product.
Chain was exchanged while checking how to use ManufacturerSite video.
By the way, there was no exchange experience of Crimp formula Chain.
In the movie, I just pulled out Pin of Chain with just this tool, but it was a bit scary so I scraped my head with Disc Grinder and pulled it out. And then work on the video. Safely exchange completed.
Although it is hard to understand how far it will be closed up when crimping Pin, I think that there is a sense of security that chooses this choice without choosing cheap items though the goods themselves are solid.
Because it is rarely used, I think whether it is a bit expensive considering it, but it is more secure than buying a cheap one to fail.
View detail
It is absolutely recommended for those who exchange Chain by yourself.
Since the tool which used before was broken, I bought this.
Prior things worked with Plike press fitting, Pin 's Crimp measuring the dimensions many times with the Caliper, but I was working with this power, but this product is a bit lucrative when I tighten Bolt lightly There are places to increase. Press fit ? Crimp is done. It was perfect if you measured the dimensions for testing.
Just work according to the Instruction Manual.
View detail
It's worth purchasing and trying out for yourself
I was planning to exchange at Shop, but DID's
I think I can also watch Crimp videos and buy it
I did Crimp.
You can fully complete Crimp yourself.
However, because it is Drive system ChainCrimp
I was slightly worried, but once I finished working and tried running
I was relieved to be relieved.
View detail
Value worthy
I did Chain cut for the first time. At first, I used it incorrectly and bent Chain. Pin also bent, but if you set it correctly, you can use it with a bent Pin. I was aided by tools. The texture is also good, I am satisfied, but there are four stars with expectation that the price will be cheaper. View detail
DID Kashimaru #50 Series Set
Hi. I want to share my experience in using the purchased goods - Kashimaru # 50 system DID tools . This is a great tool for removing links from the chain, as well as replacing it with a new one. And the same tool can rivet a new chain. The entire replacement is quick and easy thanks to this tool. I recommend this product. You will not regret buying it. View detail
Because it is an important security part, those who are not confident go to Shop
As the mileage approached 30000 km, Chain heard jingles and a big loud noise and Roller's movements became frustrating and decided to replace. Although exchange at Shop is the most certain, I chose to work on my own using Chain Cut & Crimp tool to raise Maintenance Kill
Experience a series of tasks at Events booth before actually exchanging Chain. The work itself is easy, if you apply the Chain Cut & Crimp tool properly to Chain, there is no problem, Be careful before you move Wrench. Just Cut, press fitting, Crimp and everyone seems to have strong power 40 ~ 60N ? It seems to multiply m Torque
In addition to the Chain Cut & Crimp tool, 19 mm and 27 mm Wrench are used, so prepare separately. While experiencing the tool was fixed with a 27 mm Glasses Wrench, a Crimp work was done from the extrusion of Pin with a 19 mm Gear wrench
Worked on successfully completed thanks to the fact that it was possible to practice with published videos and practice at Events booth. Both 19 mm and 27 mm of Wrench went in Glasses Wrench, but 19 mm was easier to use than Gear wrench used for experience work. Do not forget to measure the width of Plate and the Largeness of Pin in Caliper
View detail
Happy
I bought this to replace a cheap tool that didn't work. The DID rivet was stronger than the cheap tool so I was stuck. Ordered March 14 shipping from Japan to Washington state with package arriving March 17. The DID tool was superior in every way to the cheap tool. Could have saved a lot of time if I would have just purchased this this the first time. For people who have issues breaking the chain I would recommend grinding the rivet down to take some of the pressure off the pint. View detail
DID Kashimaru #50 Series Set
Hi. I want to share my experience in using the purchased goods - Kashimaru # 50 system DID tools . This is a great tool for removing links from the chain, as well as replacing it with a new one. And the same tool can rivet a new chain. The entire replacement is quick and easy thanks to this tool. I recommend this product. You will not regret buying it. View detail
DID Kashimaru #50 Series Set
Hi. I want to share my experience in using the purchased goods - Kashimaru # 50 system DID tools . This is a great tool for removing links from the chain, as well as replacing it with a new one. And the same tool can rivet a new chain. The entire replacement is quick and easy thanks to this tool. I recommend this product. You will not regret buying it. View detail