Reviews
Smartphone Folder to be expected to be durable in the future.
I had heard that attaching a smartphone to a motorcycle would damage the camera's autofocus, so I did not install one even after purchasing a motorcycle. However, recently I have been touring more and riding on unfamiliar roads, so I decided to install a folder. It is easy to install and holds the phone firmly. The parts that are subject to force are made of aluminum parts, and the durability of the Folder itself seems to be promising. I installed it on the Left Side of the Handlebar, but since the eye movement while driving is Large, it would be safer to put it in the Center. Whether this product is really good or not depends on how long it will protect my phone. View detail
It's convenient to use without any problems.
The only complaint was the startup time, but this has been improved with the May 2024 Up date.
The screen is easy to read, and there are no problems operating it with the Gloves on.
Merit is more Large-like, which allows you to control Navigation and music without leaving your phone in the Bag, than the fact that you can no longer control your phone in Insta360.
View detail
Good visibility
It is easy to see and use even during the day. It is also good that USB can be used for power supply. View detail
FirstDisplayMonitor
Installation was done by Dealer.
The hardness of the USB port, the problem of breaking if the USB port is not facing the right way, and the hardness when removing the USB port from the Slide, etc., give the impression that the product is not made with frequent connection and disconnection in mind, although it is possible to remove the USB port.
So it is basically to be used with it attached all the time. It is possible to put Wire through it to prevent theft, so I recommend using it.
I feel Merit to have a wired connection as well as a wireless connection, but you need to be careful not to lose the USB Cap!
I have not used it that much yet, but the screen is large, visibility is high, and Response is not bad.
View detail
It's secure
[How is it used?
Used for FrontCamera installation of the MiVue M820WD driver recorder.
CT110 HUNTER CUBFrontCarrier mounting bolt was co-tightened to the Bolt. Although this is not where it was originally intended to be used, it was securely installed.
Was the one you received as per Image?
Yes
Was the installation difficult?
Easy!
How was your experience with it?
I am satisfied with the image and no shaking.
[Was there anything that disappointed you?
Expected
View detail
Purchased for LenBarrelMotorcycle
I gave up my own Motorcycle when I turned 70, but I occasionally participate in Touring with Len BarrelMotorcycle.
LenBarrelMotorcycle's Option Smartphone Holder is hard to see, so I bought this product, which is easy to install without tools.
I was invited to Touring, so I immediately installed this and went Touring.
It was easy to install and secured securely to the Attachment Bar. It was easy to fix the phone with One-touch and I am glad I purchased this product.
We would like to see durability in the future.
View detail
Fits: Others
EDR-21Gα
It took me a long time to put Wiring together nicely. View detail
For my first SMARTRideMonitor.
I installed it because the slight vibration of the Motorcycle was affecting the Camera function of my phone (iPhone11Pro).
We wanted to keep Wiring simple, so we chose the Type without the drareco function.
The kit comes with a variety of brackets for installation, so I think it can be used on most large vehicles. I used the base of the RAM Mount that I originally used, so I was able to install it without any extra work.
Wiring is only required to connect to the Plus and Minus terminals of the battery and to the ACC power supply.
Both WiFi and Bluetooth connect without any problems or glitches.
It is not particularly difficult to see even under bright sunlight during the day. I expect that it will be visible even in the midsummer sun.
The downside is that other WiFi-based devices will not work. I tried to remotely control my insta360 from my phone and couldn't do it.
As a supplement, when you register as a User, you will be directed to a dedicated line for inquiries and they will respond to your detailed questions. I was lost in Wiring myself, but they were very polite and helpful.
View detail
STREET TRIPLE2023 KDR-D21 installation
I had already installed it on March 16,
This is an Impression after using it for a while and doing various settings since it did not come with a proper Instruction Manual.
First of all, installation is a simple matter of connecting the Attachment power supply, Battery power supply, and Earth.
If you know how to get power, you can DIY it. The other thing to do is to install Wiring.
In this respect, it would be good without the Instruction Manual.
It is a Camera, but I like the fact that the length of the Wiring is different for the rear and the front. However,
Why are the terminals at the connection points the same color! I don't know which way to connect...
Also, as others have mentioned, the Cap for the Air Pressure Sensor had the F and R reversed. Also, I had to disconnect the battery and reconnect it to connect to the Body.
Well, so far, it's the usual Trouble in doing DIY, so I'll leave it at that.
I'd rather have nothing. What? Nothing?" I think.
From here on, it is a feeling of use. However, since there is no Instruction Manual, it is difficult to set up the system.
Touch panel is a bit dull. I guess this area can't be helped because of the low price.
I am an iPhone and it is CARPLAY, but it takes a long time to connect.
Do you want to connect to CARPLAY 60 seconds after turning it on? appears about 2 times after turning on the power.
I can't wait, so I'm running slowly and warming up until the connection is made.
As for the connection, it's like this, so if you CHOINORI and turn the key Off
It is a hassle to reconnect each time.
The Touch panel is dull, so smooth navigation is possible when using the iPhone to search for routes.
I feel like my iPhone battery runs out faster since I started connecting to this.
All of these electrical systems are the same, but the length of the connection terminals coming out of the Body is the same.
If the terminal part is the same length, only the terminal part will swell up when it is put together...
If possible, I would like them to be connected with one wire because they are bulky, or if there are four wires coming out, I would like them to have two different lengths for each wire.
Finally, the
The good part
No need to worry about battery level since it is connected to the vehicle.
I heard that people who connect to Income can operate it by voice,
It can be operated without using the Touch panel. (I do not use Income).
This price includes Air Pressure Sensor and Front and Rear Camera.
The bad part
The iPhone battery runs out fast. (I think this is the same with all machines)
Touch panel is dull.
No Instruction Manual.
BallMount, so lower Quantity:Cannot Set. (I used SP CONNECTO)
The hardness of the Camera's feet makes it difficult to wear on round surfaces.
Is this how it is?
Frankly, I don't recommend this for those who already have a driver's license.
The price is low, so it is good for new installations.
View detail
ease of use
I purchased this for mounting a Camera on my Motorcycle using Ram Mount Parts.
The mounting is no problem, but it is troublesome to adjust the position and angle of the Camera for attaching and detaching the Camera because of the screw tightening only, so a quick release mounting is attached to the CameraAdapter.
View detail
I am satisfied with it, but there are some points that may bother some people.
I purchased the initial lot and installed it on the same day, and use it every weekend for day-touring. I originally used a smartphone Holder, but found the following points inconvenient, so I purchased this SMARTMonitor.
It is a hassle to take the phone on and off every time you get in and out of the car, especially when you stop for a short while at a convenience store.
It can't be used in the rain (it's a notebook case, so it gets wet, and USB charging from Motorcycle is likely to be shorted).
・Heat makes the phone behave strangely during extreme heat.
The phone holder that can be mounted even in a pocketbook case is too bulky and cluttered around the handlebar.
When a phone call comes in while driving, the Sleep screen appears and Navigation cannot be viewed.
The proportion of parts that are not functions of the product itself (DFS for the application of the Radio Law (60-second wait for connection), Android Auto's characteristics, and performance) is large, but I will write my impressions when I put them together and consider them as a single product.
Elimination of inconvenience points
I→m still not sure how it behaves in extreme heat, but I have almost eliminated it.
Comfort of use
→ no problem but with the following caveats
Points to note
Touch with→Gloves is not very responsive, so Touch pan is required (or TradeOff, since it didn't malfunction even with considerable rain?)
→Brightness switching may be dependent on the phone side, or it may be set to nighttime MODE even in the daytime, or daytime MODE even in the middle of the night.
→After DFS is completed, it takes a long time to connect to my phone. after DFS is completed, it goes to WiFi connection, but it connects after repeating device search, Home screen, device search 2 or 3 times (1 or 2 minutes during this time). is it compatible with my phone?
→ The screen rendering is choppy. I don't use it for Video or Game, so it doesn't affect my use, but if you're used to the slippery crispness of a smartphone, that? If you are used to the smoothness and crispness of a smartphone, you may think, "What the hell?
→And Lloyd Auto is limited in what it can do due to many restrictions.
If you don't check it beforehand, you may be surprised at how little you can do if you use it like MirrorRingMonitor on your smartphone.
Overall, I am satisfied with the price because I was able to solve the inconvenience I had expected at this price, but I think I might have been disappointed if I had purchased the product without much research.
View detail
Cospa best
It is easy to lock and the mounting strength is Firmly fixed, unmatched by other companies. View detail
Used for SHOEIEX-ZERO
This size is ideal for helmets that do not have speaker holes like EX-ZERO and have no space in the mounting position.
I have used the standard Speaker and the thin Speaker, but the Smallest is the thinnest and the sound quality is the same as the others.
The price is a bit high, so IncomeQuantity:It would be appreciated if the Speaker of the Set could also be selected.
View detail
good
I installed it on my current Ninja 400.
There is no detailed year information on the webike, but it can be installed on a '23 model.
I had a hard time deciding between DAYTONA and WorldWalk's Mount bar, but I had used WorldWalk's Mount bar on my GSX250R before, so I decided to go with it again this time.
Installation is very easy as all you have to do is remove the screw at the handlebar and install it. (about 5 minutes)
I just put it on, so I don't know how durable it is, but it is a good product and well made, so I am recommending it.
View detail
Fits: KAWASAKI Ninja ZX-4R SE, KAWASAKI Ninja ZX-4RR, KAWASAKI ZX-25R SE, KAWASAKI ZX-25R
Good vibes
I thought it would be more rugged.
It's not so bad.
View detail
Purchased due to malfunction
It has been about 2 years since I purchased Income. I bought it to try it out because I was the only one who was having trouble with Noise when I was using it.
I was hoping that it was not a malfunction of the Body, but when I tried to use it, I was able to hear it properly.
I think the cause of the failure is that Helmet was used with the speaker left inside even when Income is not in use. Considering the heat during the summer, it may have been a state of considerable overuse.
So you might want to leave it off when not in use.
View detail
Smartphone Holder KaEdia
This Holder can be easily attached with the included Hexagonal Wrench. It has an Attachment for any Motorcycle. It is very easy to operate and you can fix and remove the phone with one hand. I am very satisfied with it. View detail
Fits: HONDA CBR1000RR FIRE BLADE, HONDA CBR1100XX SUPERBLACKBIRD
Suitable for Separate Handlebars
I purchased this for a new installation of SENA's MESHAntennas. I re-installed the Antennas on the Multi Bar that previously had the Smartphone Holder and the Smartphone Holder on BPYamato's AluminumMount Bar. It is a product for CBRetc. SS. View detail
Very good.
Motard bikes do not have space to store the body, and I was concerned about the large size of the body. I chose this model because the body is small and the connecting cable is SMART and thin.
I was very anxious about the purchase, but I was able to install it without any problems, and I am glad that I was able to use the included double-sided tape and tie wrap instead of using a bracket.
View detail
Nice detail but good ??
I like it because it's easy to dress up and immeChain ??
However, it sometimes hurts that most of the colors are out of stock….
View detail