Reviews
For my first SMARTRideMonitor.
I installed it because the slight vibration of the Motorcycle was affecting the Camera function of my phone (iPhone11Pro).
We wanted to keep Wiring simple, so we chose the Type without the drareco function.
The kit comes with a variety of brackets for installation, so I think it can be used on most large vehicles. I used the base of the RAM Mount that I originally used, so I was able to install it without any extra work.
Wiring is only required to connect to the Plus and Minus terminals of the battery and to the ACC power supply.
Both WiFi and Bluetooth connect without any problems or glitches.
It is not particularly difficult to see even under bright sunlight during the day. I expect that it will be visible even in the midsummer sun.
The downside is that other WiFi-based devices will not work. I tried to remotely control my insta360 from my phone and couldn't do it.
As a supplement, when you register as a User, you will be directed to a dedicated line for inquiries and they will respond to your detailed questions. I was lost in Wiring myself, but they were very polite and helpful.
View detail
STREET TRIPLE2023 KDR-D21 installation
I had already installed it on March 16,
This is an Impression after using it for a while and doing various settings since it did not come with a proper Instruction Manual.
First of all, installation is a simple matter of connecting the Attachment power supply, Battery power supply, and Earth.
If you know how to get power, you can DIY it. The other thing to do is to install Wiring.
In this respect, it would be good without the Instruction Manual.
It is a Camera, but I like the fact that the length of the Wiring is different for the rear and the front. However,
Why are the terminals at the connection points the same color! I don't know which way to connect...
Also, as others have mentioned, the Cap for the Air Pressure Sensor had the F and R reversed. Also, I had to disconnect the battery and reconnect it to connect to the Body.
Well, so far, it's the usual Trouble in doing DIY, so I'll leave it at that.
I'd rather have nothing. What? Nothing?" I think.
From here on, it is a feeling of use. However, since there is no Instruction Manual, it is difficult to set up the system.
Touch panel is a bit dull. I guess this area can't be helped because of the low price.
I am an iPhone and it is CARPLAY, but it takes a long time to connect.
Do you want to connect to CARPLAY 60 seconds after turning it on? appears about 2 times after turning on the power.
I can't wait, so I'm running slowly and warming up until the connection is made.
As for the connection, it's like this, so if you CHOINORI and turn the key Off
It is a hassle to reconnect each time.
The Touch panel is dull, so smooth navigation is possible when using the iPhone to search for routes.
I feel like my iPhone battery runs out faster since I started connecting to this.
All of these electrical systems are the same, but the length of the connection terminals coming out of the Body is the same.
If the terminal part is the same length, only the terminal part will swell up when it is put together...
If possible, I would like them to be connected with one wire because they are bulky, or if there are four wires coming out, I would like them to have two different lengths for each wire.
Finally, the
The good part
No need to worry about battery level since it is connected to the vehicle.
I heard that people who connect to Income can operate it by voice,
It can be operated without using the Touch panel. (I do not use Income).
This price includes Air Pressure Sensor and Front and Rear Camera.
The bad part
The iPhone battery runs out fast. (I think this is the same with all machines)
Touch panel is dull.
No Instruction Manual.
BallMount, so lower Quantity:Cannot Set. (I used SP CONNECTO)
The hardness of the Camera's feet makes it difficult to wear on round surfaces.
Is this how it is?
Frankly, I don't recommend this for those who already have a driver's license.
The price is low, so it is good for new installations.
View detail
Extensions are useful
I used it for about 2000 km. I also drove about 200 km in the pouring rain. It was easy to install and the included Rain Cover did a great job of keeping the rain out. I put the things I really didn't want to get wet in the WaterproofBack and put them in this backpack, but I didn't need it. The four point fastening system is very secure. If you are not sure, you can add a binding string to the backpack, but unlike a hard case, if the contents are not tightly packed, the back will distort when strapped to the motorcycle and the string will loosen. Fastener and buckle are strong and show no sign of breaking. I got hit by a rocket once, but the back was fine, and the motorcycle was almost unscathed thanks to the back. It is really strong. View detail
Fits: YAMAHA XSR900, YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-10, YAMAHA MT-01, YAMAHA FZ8, YAMAHA FZ-1, YAMAHA FZ-1N, YAMAHA XJ6N, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA TDM850, YAMAHA TDM900, YAMAHA WR250R, YAMAHA WR250X, YAMAHA SEROW250, YAMAHA DS250, YAMAHA SR400
Use of domestic high performance Material!
I bought this Motorcycle Cover for my SR400 for fun. I bought this Motorcycle Cover because I bought an SR400 to play with and I bought this Motorcycle Cover! Also, the rainproof performance is high and it is hard to be flooded! The price is expensive, but the quality is satisfactory and of a high standard! View detail
Parenthesis is good
The look is nice, the texture is nice, and it has Logo and Parenthesis.
It is small in size, but sufficient as a side bag support.
View detail
heat holder
I bought a new bike and needed a key holder. Coincidentally, there was a product on sale on the WeBike website, so I bought it. I am very satisfied because I was able to purchase it at a very low price. And I am happy because the color of the product matches my bike very well. View detail
Awesome compact camp chair
Excellent low seat for tending to stoves, campfires etc. it packs up easily, even with the optional foot extension installed. The construction overall is of high quality. View detail
It is a defense against all odds.
Chain locks between Wheels or between front wheel and Center Stand.
U-Lock is used for outings.
Chain is difficult to load and can be used at home.
It is unlikely to be destroyed by bolt cutter, and I think it is as defensible as military standard.
View detail
ease of use
I purchased this for mounting a Camera on my Motorcycle using Ram Mount Parts.
The mounting is no problem, but it is troublesome to adjust the position and angle of the Camera for attaching and detaching the Camera because of the screw tightening only, so a quick release mounting is attached to the CameraAdapter.
View detail
SOTO PT-14SBCR Poke Torch Purchased in conjunction with
SOTO PT-14SBCR Poke Torch Purchased in conjunction with the
I thought that a regular lighter sold at Convenience or other places would be fine, but I still bought it with the thrusting spirit of wanting to use it OEM at first.
This is not a comparison review as I have not compared it to other lighters, but it works fine with the Poke Torch.
Since the product is not that expensive, I think I will place a regular order with Timing for WeBig purchases.
If it is difficult to ignite, extend the length of the wick to make it easier to light.
*Can be used as a lighter as it is.
View detail
Fits: Others , DUCATI SS900, KAWASAKI W800, SUZUKI V STROM250SX
Just the right Size!
It is just the right size to hold my smalls, change of clothes, water bottle, snacks, etc. ?I like the way it is made and the quality of the product. It is well made and I like it ? View detail
I am satisfied with it, but there are some points that may bother some people.
I purchased the initial lot and installed it on the same day, and use it every weekend for day-touring. I originally used a smartphone Holder, but found the following points inconvenient, so I purchased this SMARTMonitor.
It is a hassle to take the phone on and off every time you get in and out of the car, especially when you stop for a short while at a convenience store.
It can't be used in the rain (it's a notebook case, so it gets wet, and USB charging from Motorcycle is likely to be shorted).
・Heat makes the phone behave strangely during extreme heat.
The phone holder that can be mounted even in a pocketbook case is too bulky and cluttered around the handlebar.
When a phone call comes in while driving, the Sleep screen appears and Navigation cannot be viewed.
The proportion of parts that are not functions of the product itself (DFS for the application of the Radio Law (60-second wait for connection), Android Auto's characteristics, and performance) is large, but I will write my impressions when I put them together and consider them as a single product.
Elimination of inconvenience points
I→m still not sure how it behaves in extreme heat, but I have almost eliminated it.
Comfort of use
→ no problem but with the following caveats
Points to note
Touch with→Gloves is not very responsive, so Touch pan is required (or TradeOff, since it didn't malfunction even with considerable rain?)
→Brightness switching may be dependent on the phone side, or it may be set to nighttime MODE even in the daytime, or daytime MODE even in the middle of the night.
→After DFS is completed, it takes a long time to connect to my phone. after DFS is completed, it goes to WiFi connection, but it connects after repeating device search, Home screen, device search 2 or 3 times (1 or 2 minutes during this time). is it compatible with my phone?
→ The screen rendering is choppy. I don't use it for Video or Game, so it doesn't affect my use, but if you're used to the slippery crispness of a smartphone, that? If you are used to the smoothness and crispness of a smartphone, you may think, "What the hell?
→And Lloyd Auto is limited in what it can do due to many restrictions.
If you don't check it beforehand, you may be surprised at how little you can do if you use it like MirrorRingMonitor on your smartphone.
Overall, I am satisfied with the price because I was able to solve the inconvenience I had expected at this price, but I think I might have been disappointed if I had purchased the product without much research.
View detail
Mounted on CROSSCUB110 JA60
Note that the Main zipper portion is waterproof, but the Others are non-waterproof.
Puncture RepairQuantity:Set, rain gear, Inflator, and folding chairs are always in the bag and have more storage and comfort.
View detail
It's so easy to use.
The SeatBack and Side Back that I used to use were of the type where the Seat is removed and the Support belt is attached, so I used the ETCCard as a Quantity.:I was having trouble with the belt gapping when I set it, but the product I purchased does not require such problems, and it is securely fastened and does not gap at all when breaking.
it's the best
View detail
![Rear Box [B32NB]](https://img.webike-cdn.net/catalogue/images/75563/16965_TS.jpg)
I liked it.
Installation and removal are excellent.
Is the rigidity a little weak, perhaps because it is designed to be lightweight?
View detail
Fits: HONDA CB1300SUPER BOLD'OR, HONDA CB1300SUPER BOLD'OR SP, HONDA CB1300SUPER FOUR SP, HONDA NC750X, HONDA CB1300SUPER FOUR, Others , HONDA CBR650R, HONDA CB1000R, SUZUKI V STROM250SX
Great for touring up to medium distances.
The RainCover was also included, which was a nice touch. View detail
Reliable Brand
Purchased due to the addition of a Large Motorcycle.
We use Chinese STAND for 125 and 400 Class Motorcycles and this one for Large Motorcycles.
With Chinese STAND, the STANDBODY is distorted by the weight of the car body when it is lifted up, but this product can be lifted up stably without any problem at all.
If I had to make a request, I would say that protective parts should be attached to the pipe that touches the ground when lifting up, otherwise the STAND will become wound wound.
View detail
Large doubles as Small
Boxes used so far
Mono-lock case [E43NTL-ADV]
It is good because there is plenty of room in terms of capacity, but the closing operation is cumbersome until you get used to it.
It was Stress every time, every time.
Mono-lock case [B32NB-ADV]
The closing motion was easy as I just closed the lid.
Top box 35L, compatible with Honda OEM and Smart key
Although Merit is that only one Smart key is needed.
The inside of the box has a lot of protruding parts, and perhaps because of its shape, it is necessary to consider the direction of the Helmet when storing it.
I had only used it for 2 months, but Stress was more Large.
That's where I found this B45+ this time.
Well, certainly Large
I think it looks the worst from behind.
But I think the security of being able to fit a lot of luggage and the lack of Stress when using it is good.
Base plate is made of Wide (Sold separately) I feel more secure now that I have changed to
I don't know if it's because it's still new, but the Hinge part is stiff.
Much thinner and chubbier insoles than previous GIVI product insoles
Those are the two things I'm not happy about.
My request to Manufacturer would be to add a Pocket or something to hold the included Net in the corner or edge of the lid side!
View detail
Cospa best
It is easy to lock and the mounting strength is Firmly fixed, unmatched by other companies. View detail
Handlebar Lock is not possible.
Ignition and Seat Cylinder set.
I was able to purchase it at a reasonable price, but I was unable to lock the handlebar, which is the most important thing.
We took security measures in a different way.
View detail