Reviews
ETC Antenna BracketTYPE 3
Can be installed by co-tightening with Mirror Bracket.
Installation should be completed in 15 minutes.
The product is not very thick, so you can slightly adjust the direction of the ETCAntennas etc. by hand.
View detail
neck-mounted digital voice recorder
As a Type without Wiring, I bought it for its ease of use.
The neck is thin, so it's hard to fix it. It is lightweight, so there is no burden on the neck.
As for the images, they're pretty good. (I'm checking general and wide angle, fisheye, not yet) . The sound sounds almost like noise to me.
The operating time is short because it is a rechargeable Type, but it is possible to use it for commuting to work, etc.
View detail
I have several Helmets, so that helps.
[FreedConn For R1-PLUS I have several Helmets, so I bought the Speaker kit separately, and here is the Plate for when I run out of Income attached to the Helmet!
It's the one and only. (Lol)
View detail
DAYTONAfor Repair
I bought this one because I cry when I drop it.
Used for thruxtonrs.
The oval-shaped swing arm has a shallow hook.
If this is not possible, use a Y-shape.
View detail
Universal touring bag
Also using DFG's Side BackBase, the Quantity:Pair (for Left and Right) It was installed on a CRF250L in the form of a swing.
7.I thought the 5L size would have a very small capacity. However, if two bags are attached, there is plenty of room, and I think it is a size that can be used for overnight touring.
I am a day-tripper, and to cook lunch, I need a GasCooker, mont-bell kettle, mug cup, 1L of water, cup noodles, and KIJIMA's electric air pump, etc.:Pair (for Left and Right) I put them in the bag, but there was still room in the bag.
I actually went on a touring trip on a forest road, and while off-road driving inevitably leads to dust and mud, it is good that this bag can be washed in water without worrying about it.
It can be mounted on top of Tail cowl or Carrier with Single Body, or it can be mounted on top of Quantity like myself.:Pair (for Left and Right) It can also be used in sorting, making it a very user-friendly and universal Bag.
I would like to use it in combination with the 15L size when I go on long tours.
The car is equipped with a variety of DRing and loops, so it can be installed as desired using various straps and belts, even if the installation is not according to the Instruction Manual.
View detail
Fits: HONDA ADV150, HONDA CBR250RR, KAWASAKI Z650, KTM 390DUKE, SUZUKI KATANA, YAMAHA MT-03, Others
Brilliant
Japanese quality, brilliant cases for sport bikes. Looking like custom made for the Suzuki Katana. Tanax needs importer in Europe! View detail
Fits: KAWASAKI KLX250, KAWASAKI D-TRACKER X, KAWASAKI KLX230, YAMAHA Tenere700, YAMAHA WR250X, YAMAHA WR250R, YAMAHA SEROW250, HONDA CRF250RALLY, HONDA CRF250L
For Off-road motorcycle touring
Quantity of ModuleMotoBag, also from DFG, on CRF250L:Pair (for Left and Right) I purchased this product to install in
With this Side BackBase, the Quantity:Pair (for Left and Right) The bag of the "B" is installed diagonally in the front direction, but this position does not bother me at all when standing off-road, and it fits in a good way.
Also, Quantity:Pair (for Left and Right) The bag of the "Rear Sets" is firmly attached without any bloat, so it can be used as a "Quantity" starting from the top of the "Rear Sets".:Pair (for Left and Right) The bag is very good because it feels more integrated with the body of the vehicle than with the bag of the sorting system.
I installed it and used it on a one-day forest road touring and it was very good.
Above all, Bag is not the upper part of Seat, but Quantity:Pair (for Left and Right) It is good to swing the vehicle into and out of a high off-road motorcycle so that your feet do not get caught when you get in and out of the vehicle.
However, when I attached the Belt to the D Ring of the Base as per the Instruction Manual, there was too much room and it was a little too loose, so I attached the Belt to the Quantity:Pair (for Left and Right) It was just right to install it through the different inserts.
However, the method of attachment depends on the capacity of the bag, so I think it is best to be creative here depending on the capacity of the luggage.
I think it is a very good TouringGoods from Offfor Vehicle because it is easy to install on the vehicle body.
View detail
useless
Purchased for Spoke maintenance. Conclusion:It can't be used. First of all, I can't use it with Harley because I can't get over the bumps. It was faster to use Jack. View detail
With a sense of security.
If you are looking for a bar mount, this is it.
Bar mount at 1 inch This is a safe bet.
View detail
Well done.
Purchased for THRUXTONRS FE with KaEdia
The cheap ones will drop the phone, so this must be it.
The joint between the ball and the body is a little loose.
It comes out a little bit when you push it in.
It doesn't matter because I stop at Screw, but it bothers me a little.
View detail
I use it as a parasol.
I used to carry it in my car as a folding umbrella, but when I use it as a parasol on a summer day, it is just the right size and the back is cool. It also looks like a parasol. Why don't you start a parasol men? View detail
Fits: SUZUKI Address50, SUZUKI AddressV110, SUZUKI Basket, SUZUKI LETS, YAMAHA VINO, YAMAHA JOG, HONDA dunk, HONDA glom, HONDA TACT, HONDA Giorno, HONDA DIO, KAWASAKI Z125PRO, KAWASAKI KSR-1, SUZUKI BIRDIE, SUZUKI VECSTAR150, SUZUKI VECSTAR125, SUZUKI ADDRESS110, SUZUKI ADDRESS V50
just plain unsatisfactory
This time, due to various circumstances, we gave up our liter SS and purchased a new GROM after a Hara 2Scooter.
It is my first new car in about 16 years, and although it has a roof, I have to park it in a place where it is almost exposed to the rain, so I decided to buy a Cover first and foremost!
When I put the cover on, it doesn't fit well. I think the height of the Mirror and parking with the Handlebar turned off are not taken into consideration.
Even with very careful Cover, the slightest breeze would roll it up to the Front Fender (I reapplied it this morning, but it was rolled up before noon).
It also has a Belt at the bottom to prevent flapping, but the Belt was not threaded through the Male side of the Buckle.
We are in the process of applying for a conformity warranty, but will replace it even if the application is not approved.
If your application is not approved, you are throwing away Gold. I definitely do not recommend it.
View detail
Expect to see improvements with Up dates.
I used it for Touring about 12 hours, 200 km down the road. I think it looks good, has a good battery capacity, and fits well in the helmet. I had two mysterious power downs during the touring and the doughnut shaped ear pad was too thick to fit my ears properly and bent inside the helmet, causing pain. Once the Ear Pad was removed, the ear pad fit my ears with no problem at all, and I didn't notice much difference in sound quality. The Mesh connection is convenient once you get used to it. As others have pointed out, I was very disappointed that the power supply turned off by itself. I was worried that it would turn off at any moment because I didn't know the reason. I hope this will be improved. View detail
Limited installation methods for back camera
Wiring length of the back camera is halfway; 1m on the Camera side and 1m on the Extension Cord,
The Camera side should be about 30cm and the Extension Cord should be about 2m.
Unlike a driver's camera, the Body's mounting position is near the with handle, so the current wiring length requires a connector connection at the halfway point, making wiring difficult.
The Cable that connects to the Body also has a 4-point screw on the Body Reverse side, but this is troublesome to install.
With this structure, even if the BodyMount base can be removed with One-touch, when the Cable is inserted again,
Since the connector is fixed with a rubber band to prevent 4-point tightening, it is necessary to use a precision driver to remove the screws and insert the cable before fastening the screws, so the screws are left attached after all.
The four screws on this base are not designed to be detached, so if they are completely removed, the screws may be dropped and lost.
The back camera can only be mounted on the upper side of the base in the direction from which the camera is suspended, and cannot be flipped up and down in the body settings.
The position of the Fixing Screw between the Base and Camera is not in the Center, so changing the mounting direction of the CameraBody is necessary,
Difficult to set the adjustment angle downward because the angle of the Camera is Up.
I tried attaching it to the Fender, but it could only be adjusted slightly Up from horizontal.
View detail
Fits: KAWASAKI Ninja ZX-4R SE
M820WDController CT110 HUNTER CUB Brake folder Exactly for mounting
[How is it used?
MiVue M820WD Drareco Controller mounted in the Right SideBrake folder of the CT110 HUNTER CUB2BJ-JA55.
Although the name of the folder is Clutch folder, as shown in the product description photo, the folder can be attached to the Right Side Brake folder as well, effectively and securely.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is easy. The angle of the brake lever changes when the brake folder fixing screw is loosened for installation. If you mark the current position before loosening the screw, you will not have to readjust it when assembling.
How was your experience with it?
It can be mounted securely, making it easy to work with Switch operation.
[Included Parts:were they on?
Yes. Matching mounting Bolt and collar are included and ready to install.
[Was there anything that disappointed you?
There is none. As expected.
▼ Requests
It would be easier to find a Brake folder if the name of the product listed is "Clutch holder...".
View detail
Fits: Others , YAMAHA SEROW250, YAMAHA TMAX500, YAMAHA RZ250R, TRIUMPH TRIDENT 660, YAMAHA MT-09, SUZUKI RF900, SUZUKI GSXS1000F, SUZUKI GSX-S750, SUZUKI GSX1100S KATANA, SUZUKI GSX-S1000, SUZUKI B-KING, SUZUKI GSX-R750, KAWASAKI zephyrχ, KAWASAKI NINJA 1000 (Z1000SX), KAWASAKI ninja250, KAWASAKI ZX-9R, KAWASAKI ZX-6R, KAWASAKI ZEPHYR400χ, KAWASAKI ZRX1200
Great product for the price
Sometimes a backpack is not enough.I use it for daily trips ..After reviewing several different tail bags, the Tanax seemed to be the perfect size.the Trails End bag attached securely and the excess length of the strap ends, tuck away cleanly. It looks well made, and I especially like the fact that the bag keeps it shape when empty.It is waterproof and the fabric is durable.Additional pockets are very functional.really great price, good and quality from many known brands.highly recommend. View detail
It's good to have it
All Data is here.
When something is broken, something is modified, or some parts are added, it is possible to isolate from electrical drawings, tightening torque, and error codes, and to perform pass/fail tests for each part.
If you do your own maintenance, there is a LARGE difference between having it and not having it.
Service manual for YZF-R1 RN20 4C8 is very expensive but I am glad I bought it.
View detail
Smartphone Folder to be expected to be durable in the future.
I had heard that attaching a smartphone to a motorcycle would damage the camera's autofocus, so I did not install one even after purchasing a motorcycle. However, recently I have been touring more and riding on unfamiliar roads, so I decided to install a folder. It is easy to install and holds the phone firmly. The parts that are subject to force are made of aluminum parts, and the durability of the Folder itself seems to be promising. I installed it on the Left Side of the Handlebar, but since the eye movement while driving is Large, it would be safer to put it in the Center. Whether this product is really good or not depends on how long it will protect my phone. View detail
Fits: YAMAHA YZF-R25, SUZUKI Hayabusa, SUZUKI GSX-S750, SUZUKI SV650X, SUZUKI Gixxer 250, SUZUKI V-STROM250, KAWASAKI Z900RS, KAWASAKI ZX-10RR, KAWASAKI Z650, KAWASAKI Ninja250, KAWASAKI W800, YAMAHA YZF-R3, YAMAHA Tenere700, YAMAHA XSR700, YAMAHA SR400, YAMAHA TRACER900, HONDA rebel1100, HONDA VFR800F, HONDA CB1100, HONDA CRF250 RALLY
It is compact and practical.
It is small in size and easy to carry.
If you park outdoors during a long-distance tour, dew will form in the morning and the sheets will often get wet.
Especially in the spring, when pollen gets mixed in and gets messy, it can be really useful.
Lastly, since the material is thin, it is easy to fold and store. -------------------------------------------------- -------- It is small in size and easy to carry. If you park outdoors during a long-distance tour, dew will form in the morning and the sheets will often get wet. Especially in the spring, when pollen gets mixed in and gets messy, it can be really useful. Lastly, because the material is thin, it is easy to fold and store. Powered by Google Translator
View detail
Shame about the cross section.
It is lightweight and strong, only real Carbon, and the price is about the same as the price of Gold or leather shoehorns, so Material:I think this price for Carbon is also cosmetically pleasing.
On the other hand, the cut edges are not rounded and the wall is precipitous. [Color] Too bad it is not Clear painted as well.
In the product photo, it looked like it was treated roundly.
It looks like it's left uncut and looks cheap, and it's easier to use as a shoehorn if the edges of the cut surface are rounded off.
View detail