Reviews
Fits: HONDA MONKEY, HONDA GORILLA, HONDA CHALY, HONDA DAX, HONDA CD50
GORILLA
Street driving is much easier now. National highways are no problem.
But not the highest speed.
Next up is a five-speed.
View detail
To replace a deteriorated and obsolete Radiator hose
This is a combination of Straight Type hose and Hose Joint Pipe and is used as a substitute for the Radiator hose, which has been discontinued and cannot be replaced.
The coolant was nearly 40 years old and had deteriorated to the point of leaking, but we were able to stop the leak by replacing it.
Although it was not possible to make it the same shape as the NORMAL, both the inlet & outlet could be made in the same position as the NORMAL, and the substitute could be made without putting a load on the hose.
View detail
Fits: KAWASAKI KLX110L, YAMAHA YZF-R3, HONDA Rebel300, HONDA CB300R, HONDA CB150R, KAWASAKI NINJA400 (2014-), KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA2 Helmet50R ABS, KAWASAKI NINJA250R, KAWASAKI NINJA250R, KAWASAKI ZX-14R, KAWASAKI ZX-14R, KAWASAKI ZX-10R, KAWASAKI Ninja ZX-25R SE KRT Edition, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, YAMAHA YZF-R3, YAMAHA YZF-R25, YAMAHA YZF-R25, YAMAHA YZF-R25
DAYTONA Oil Clean Bolt
Item arrived..as can see,superbe packing since day 1 of my order with webike.product is as advertised.very light and strong magnet.quality good..thank you team webike.. View detail
Tools are required
The most difficult part is to remove the bracket from the throttle body. Once this is removed, installation is easy, Even if you have an oil temperature meter, it will not cool down without an oil cooler in summer. View detail
This is a standard Vmax1200 product.
[How is it used?
I used it on a Vmax 1200.
Was the one you received as per Image?
Yes.
Was the installation difficult?
I had it installed at a Motorcycle shop (Right-arm in Nishi-Tokyo).
It is located in a secluded area, so it would be better to ask for a PRO.
How was your experience with it?
The engine runs well.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
None in particular
View detail
Fits: KAWASAKI GPZ1000RX, KAWASAKI GPZ1100, KAWASAKI GPZ900R, KAWASAKI Ninja ZX-10, KAWASAKI ZZR1100, KAWASAKI ELIMINATOR 750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR1100 RS
DAYTONA Oil Change Perfect set
Would buy again.
because it's easy
View detail
Fits: HONDA CROSSCUB110, HONDA CROSS CUB50, HONDA SUPER CUB110, HONDA SUPER CUB110PRO, HONDA SUPER CUB 50, HONDA SUPER CUB 50PRO
Cost-effective!
This is a must-have Items for CROSS CUB Oil replacement. All packing and filters to be replaced are included, and the discount is very reasonable. I use CROSS CUB for touring, so I replace the oil only about twice a year. So I replace Packing and Filter every time. I will continue to repeat this service in the future. View detail
Fits: HONDA CRF250M, HONDA CRF250 RALLY, HONDA CBR250 R, HONDA CB250F
honda oil filter
A genuine Honda filter that you trust and buy. I was very impressed with the fast delivery and packaging. I want to change the oil quicklyAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: HONDA CRF1000L, HONDA CRF1100L AFRICA TWIN, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES, HONDA CRF1100L AFRICA TWIN ADV SPORTS ES DCT, HONDA CRF1100L AFRICA TWIN DCT, HONDA CRF250L, HONDA CRF250L(S), HONDA CRF250M, HONDA CRF250R, HONDA CRF250RALLY, HONDA CRF250RALLY(S), HONDA CRM250AR, HONDA CT125, HONDA TRAIL125, HONDA TRX450RX, KAWASAKI D-TRACKER X, KAWASAKI VERSYS1000, KAWASAKI VERSYS1000SE, KAWASAKI VERSYS650, SUZUKI V-STORM1000
I still feel safer with the Bolt stop.
OEM Cap." Than Screw bolt." looks better. It also provides some Prank protection. I also put a Plastic bolt cap on mine.
It goes on the 2023 CRF250RLY50MD47 with no problem.
View detail
Fits: SUZUKI GSX600 S, SUZUKI GSX600 F, SUZUKI GSX750 F AK111, SUZUKI GSX750 F AK121, SUZUKI GSX750 F GR78A, SUZUKI GSX750 F AK211, SUZUKI GSX750 F GR7GA, SUZUKI RF400 R GK78A, SUZUKI RF900 R GT73A, SUZUKI RF400 RV GK78A, SUZUKI RF900 R GT73E, SUZUKI SV1000 SZ VT54A, SUZUKI SV1000 S VT54A, SUZUKI SV400 VK53A, SUZUKI SV400 S VK53A, SUZUKI SV650 X VP52A, SUZUKI SV650 SX VP52A, SUZUKI VL800 Intruder Classic VS54A, SUZUKI VL400 Intruder Classic VK54A, SUZUKI VL800 Intruder Classic VS55A
OEM Equivalent Product quality Oil Filter.
I used this filter to replace the oil in my DL1000 V-STROM800. The filter wrench was very good, and the oil filter was installed with the proper torque. View detail
Fits: SUZUKI GS1200SS, SUZUKI GSF1200, SUZUKI Inazuma 1200, SUZUKI Bandit 1200, SUZUKI Bandit 1200 S
That's good enough for me.
It is a reliable manufacturer and not so expensive.
We are replacing them rather quickly.
I've also used Iridium plugs, but they're not as expensive as they should be.
I was not particularly impressed, so I think the Standard Type is sufficient.
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-Strom 650, SUZUKI V-Strom 650 XT
Dare Standard Plug BP5HA
It is replaced at 6 years and 20,000 km.
I was hesitating between Windshield IRIDIUM and Standard Plug BP5HA, but I dared to go with Standard Plug BP5HA.
There is a Gap in the poof.
I can't rely on the burn because of Injection, but Plug is already delirious.
Especially, Sub plug (SV650X has a Plug on the Head with a Quantity:2pc. Set at a time) had soot stuck to both the front and rear sides.
Is this how it's supposed to be? I don't know.
Last time vehicle was inspected (10000 km traveled) I didn't replace them with beans because I thought they were not expensive, but I thought I would replace them with Malu beans next time.
I noticed that the Radiator was distorted when I was replacing it. It seems that it had been hit by the ground when it was standing on the ground.
I was wondering why the Oil cooler fan was making strange contact with the Head.
The Radiator guard I bought occasionally cannot be installed! It's defective! Your Radiator may be distorted!
View detail
Easy installation OEM peace of mind
Installation was very easy.
Lightweight and thinly made.
I am not sure how good the protection effect is (so I rated it 3), but it is an OEM product and I chose it as a reassurance factor!
View detail
Fits: SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI Gixxer 150.
This is all you need to be perfect.
As the name suggests, it is Perfect!
Gasket included in all areas, so no need to worry.
This is a necessity for Oil replacement.
I always Repeat with Oil.
View detail
very well machined carburettor kit, high quality, I recommend to add an English language manual to it as only in Japanese. View detail
Fits: HONDA CR250, HONDA CR500, HONDA CR250R, HONDA CR250R, HONDA CR500R, SUZUKI RM250
ดีส่งไวพนักงานดูแลดี ไว้จะมาสั่งใหม่อีกนะครับผม ขอบพระคุณคร้าบบบบบบบบบบบบบบบบบบบบบบ View detail
The piston ring set contains what you need to freshen up this area
About quality and texture - The piston ring set from SP Takegawa is made from steel with a heat treated surface finish, the quality from the overall fit and finish is perfect. About the feeling of use - SP Takegawa make it too easy to maintain their engine kits. The piston ring set contains what you need to freshen up this area of the engine without having to repurchase the whole engine kit previously installed. Products to buy together - A key product to purchase when freshening up the top end of the engine is a new gasket set as it is far from advised to reassemble this area with used gaskets. Difficulty of installation - The installation of the piston ring set is an advanced task that took 2 hours to complete. Mechanical aptitude and the use of assorted hand tools is what is required to disassemble this part of the engine, correctly fit to the piston and then button the engine back up. Cost performance and comparison with other products - I find the cost of all the products SP Takegawa sell to be on par when compared to what most other companies sell their products for and the piston ring set is no different. About shipping and packaging - With there being no cost difference between sea freight and EMS for the piston ring set, I chose EMS for an earlier arrive date. The part was extremely well protected while being covered in bubble wrap and surrounded with air pillows in a sturdy cardboard box. Any concerns, cautions, or advice when purchasing - Webike Japan is the first place I look to for all my motorcycle needs. From service parts to performance products and even motorcycle gear and apparel, Webike always seem to satisfy my needs in regards to availability and pricing. View detail
Polisport Radiator Shroud Set for CR125R 2001
This was a set of radiator shrouds that needed replacing for wome new ones as the old ones had a lot of damage from rocks etc. I decided on the Polisport ones as I have used them a few times before and have had good experience with this brand. The radiator shrouds were pretty good value and are cheaper than some of the other alternatives out there. With a few other parts in my order, all were shipped together to save some costs. My order was delivered by EMS and took 5 days to arrive. The shrouds arrived in the Polisport packaging and were surrounded in buibble wrap to keepo them from sustaining damage in transit. The shrouds are made from a strong plastic material and are pretty robust and strong. There is a bit of flexibility so you can sit them fairly easily. I would recommend this brand for off road bike body work as they are cheap enough and last a while. The quality is really good and I found no flaws at all. Very pleased after fitting and the bike looks a lot more appealing now. Thanks Webike. View detail
Looks good. Fit nicely.
Compared to the old hose, this is much more flexible. Fitment is good, don't think there will be any issue. I can recommend this hose for replacement need. View detail
No particular deficiencies
It is for advanced users, as a certain amount of knowledge and a certain amount of tools are essential.
The quality is not bad.
There is no BALI that can cut your hand.
Holes, which are holes, should be cleaned thoroughly because of shavings.
BALI should be shaved and finished as usual with a little File, about 1000.
The head has a big valve already assembled,
It was easy to install the included High Camshaft and OEM Locker Arm.
Reinforced Crank, Piston, Cylinder, Headetc.
It's a bit rough, but this is all that's included, along with an instruction manual,
I think it is a much better value for money because of its good quality ^^^;.
View detail