Reviews
Fits: HONDA MONKEY 125, HONDA NSF100, HONDA CROSS CUB50, HONDA SUPER CUB 50 PRO, YAMAHA YZ65, KAWASAKI KLX110L, KAWASAKI Z125 PRO, HONDA APE100, HONDA APE100 TypeD, HONDA ATC70, HONDA BENLY90S, HONDA C50 SUPER CUB 50 Custom, HONDA C50 SUPER CUB 50 Standard, HONDA C50 SUPER CUB 50 DELUXE, HONDA C50 SUPER CUB 50 BUSINESS, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50 CUB press 50, HONDA C50L LITTLE CUB, HONDA C50LM LITTLE CUB
Necessary and sufficient performance
The price and performance are sufficient for the need. This is OK for city driving Level. View detail
Fits: HONDA CB1100RS, HONDA CB1100EX, HONDA CB1100, HONDA CB1100 type II, HONDA CB1100, HONDA CRF1100L(Africa Twin), HONDA CBR1000RR SP, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000F, HONDA CBF1000, HONDA CBR1000F, HONDA CBR1000F, HONDA CB750K6, HONDA CB900 HORNET, HONDA CB900F (BOL D'OR), ROYAL ENFIELD BULLET 500EFI, ROYAL ENFIELD ContinentalGT
Best Balance Choice
If you consider the product as a consumable item without overdoing it, you will end up with the best balance. The Chain Cut & Crimp tool is also a beautiful choice. A bit of a geek's touch, isn't it? The silver color is a nice touch. View detail
That's what I'm talking about, Mr. OnoSpeed.
The left hand, which was giving me tendonitis, has also been greatly reduced. The installation was a snap, but you have to make sure you adjust the clutch properly, remove the power assist, and adjust the LongRelease properly. If everything was Yellow Pine, it would be the most blissful experience.
The look is great, and the consistency with the Brembo master is perfect.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA SUPER CUB110-PRO, HONDA CROSSCUB110, HONDA CROSSCUB110, HONDA MONKEY125, HONDA DAX125, HONDA glom, HONDA SUPER CUBC125, HONDA SUPER CUBC125, HONDA SUPER CUB 50-PRO
Good quality rear sprocket from KITACO
This is a good quality rear sprocket from KITACO, it's made of steel so it's much more durable than the aluminium ones if a bit more heavy but on the plus side it is a lot less expensive also. This is 32 teeth, it's 2 less than the original 34 one so it's better for top speed. Another good quality product from KITACO as usual! View detail
520Conversion
Chain, I purchased this item from Timing on Sprocket exchange.
The secondary deceleration ratio is now about 2.7, and I can drive Smoothly without feeling a lack of Torque during acceleration. (At first it felt strange when starting off, but once I got used to it, I prefer it this way.)
View detail
Fits: KAWASAKI GPZ400R, KAWASAKI GPZ250R, KAWASAKI GPX400R, KAWASAKI GPX250/R/R2, KAWASAKI FX400R, KAWASAKI EX-4, KAWASAKI ER-5, HONDA SL250, KAWASAKI GPZ400S, KAWASAKI GPZ500, KAWASAKI GPZ500, KAWASAKI KR250/S, KAWASAKI Z250 (2013-), KAWASAKI ZZR250, KAWASAKI ZZR250, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250V, KAWASAKI ELIMINATOR 250, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX
Accurate and lightweight
I bought this for Circuit.
For MINICourse is swinging to the side with the show.
Lighter weight compared to OEM helps reduce load under Spring.
View detail
Fits: KAWASAKI ELIMINATOR250SE, KAWASAKI ELIMINATOR250, KAWASAKI ELIMINATOR250LX, YAMAHA YZF-R3, YAMAHA YZF-R25, KAWASAKI ELIMINATOR250V, KAWASAKI ER-5, KAWASAKI FX400R, KAWASAKI GPX250R II, KAWASAKI GPX250R, KAWASAKI GPX400R, KAWASAKI GPZ250R, KAWASAKI GPZ400R, KAWASAKI GPZ400S, KAWASAKI Ninja250, KAWASAKI Ninja250SL, KAWASAKI VERSYS-X 250, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI ZEPHYR400
exchange
I bought this for a ZZr250 Rear Sprocketfor replacement, it is lighter than the OEMSprocket and looks better in Gold. It is an applicable product and I was able to install it without any modification. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Stable SUNSTAR
I was not sure about BlackSteel, but I decided that lightness is justice.
I changed from 43T to 42T, but since it is Rear, I don't think it changes anything experientially.
Next time I will change Front as well and see how it goes.
View detail
perfect quality
The Gale Speed Clutch has perfect quality and performance. After installing this, you can drive more comfortably than before with a lighter clutch feeling than usual. View detail
Fits: HONDA CLIQ110, HONDA NAVI 110
Thankful product
I appreciate Large change because Aftermarket parts (especially consumables) for Motorcycle that are not FOR JAPAN MODELLineup can be purchased at about half the price of IndiaHondaOEM Product. View detail
Fits: YAMAHA WR250Z, YAMAHA YZ426F, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KX250, KAWASAKI KX125, KAWASAKI KLX300R, KAWASAKI KX125, KAWASAKI KLX250R (for competition), KAWASAKI KLX250R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KDX250R (for competition), KAWASAKI KDX220R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI KDX200R (for competition), KAWASAKI D Tracker, HONDA XR200, HONDA TLR260, HONDA CR250
The best chain you can buy
best chain I have used ,I have been riding for a long time and this chain scares me how long it has lasted .Been on my bike for over 80 hrs of mostly track riding and still has not stretchedI check it often to see if its still ok and cant believe it is .I only buy the best quality and have have excellent chains but this one has already lasted 2 times as long and still going View detail
Fits: YAMAHA vino, YAMAHA jog, YAMAHA jog, YAMAHA jog, YAMAHA JogPetit, YAMAHA JogPetit, YAMAHA JogPetit, YAMAHA JogDX, YAMAHA JogZr, YAMAHA JogDX, YAMAHA JogDX, YAMAHA JogZr, YAMAHA VINO, YAMAHA VINOMolar feh
Kitaco Belt variator
The delivery was successful, but the packaging was damaged, there was an incision on the package, but in general everything is fine. The CVT belt is hard of good quality and goes to the very top. I recommend View detail
Fits: YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Axis Street, YAMAHA Cygnus X, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X FI, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR, YAMAHA Cygnus X SR
Just Right Rate
The rate of the center spring that comes with the KOSODrive kit is too high, and while it is quickly good for acceleration in town driving, the rate of the center spring is too low.
I wanted to reduce the rate because the normal RPM is too high and the Damage to the Belt is too large and the fuel consumption is too low.
Before the replacement, Belt had about 5,000 km when using the KN project, and other than that (including OEM) However, after the replacement, the Belt has been able to run for 10,000 km without running out. (It looks like it can go 20,000 km in terms of wear and tear)
When accelerating at full throttle KICKDown, the Large body shifted at about 8000 rpm before the replacement, but after the replacement, the Large body shifted at about 7000 rpm.
However, the Sensep is not too soft and the shifting is not too rough, and the acceleration is now very natural and smooth. (Although there is also the effect of SliderBearing combined with Center spring)
If you want to drive a Scooter as a normal foot pedal without any discomfort, this level of Rate is better.
View detail
Fits: HONDA CRF250R, YAMAHA TT250R, YAMAHA TT250R, YAMAHA TT250R, SUZUKI RM250, KAWASAKI KLX230, KAWASAKI KDX250SR, KTM 450 SX-F ie, KTM 450 SX-F, YAMAHA WR450F, YAMAHA WR426F, YAMAHA WR400F, YAMAHA WR250Z, YAMAHA WR250Z, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250F, YAMAHA WR250, YAMAHA WR250, YAMAHA WR200R
Genuine DID 520 Replacement Chain Link
I always like to have some of these in stock in case opf any issue during fitting different chains. The DID 520ERT3 is one I do have in stock but have no spares. I found this chain link by just searching through the DID inventory on Webike website. It was really easy to find so you should be just fine. I ordered a few other different chain links along with this as I do like options with spare links. All were shipped together and this saved some shipping cost. My order arrived in 5 days from being shipped. The chain link came in a nice sealed packet with all that is needed to refit. You do get a not seem to get the white grease packet in this size chain but that's ok, I have a lot of these anyway. The chain link is very well made, it also is in the gold colour so nice looking too and it is also embossed with the DID logo so you know it's genuine. Very happy with these small purchases and these will keep me going for future. Thank you Webike. View detail
Fits: SUZUKI GSX-R750/R, SUZUKI GSF650/S oil-cooled(05-06), SUZUKI GSX750F oil cooling, SUZUKI VZ800 MARAUDER (97-02), SUZUKI GSX-R1100 530conSize), SUZUKI DESPERADO800/X(97-), SUZUKI RF600R(93-), SUZUKI GSX600F oil cooling, SUZUKI GSF600/S oil cooled(95-04), SUZUKI GSX-R1100 [oil cooled] 530con size), SUZUKI GSX750F[GR78A/GR7GA]Oil cooled, SUZUKI GSX-R750/R [oil cooled], SUZUKI GSX600F[GN72A/GN79A]Oil cooled, SUZUKI DESPERADO800/X(97-), SUZUKI VZ800 MARAUDER [Marauder](97-02), SUZUKI GSF650/S[Bandit]Oil cooled(05-06), SUZUKI GSF600/S[Bandit]Oil cooled(95-04), SUZUKI RF600R(93-), SUZUKI DESPERADO800/X(97-), SUZUKI VZ800 MARAUDER [Marauder](97-02)
AFAMAfamRear spokeROCKET (Steel)
I was looking for a Steel spot ROCKET that can be used with GSXR110 Wheels.
I think they will last longer than the ones we used before.
Unfortunately, it is Painted.
View detail
Fits: YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA XSR700, YAMAHA MT-10 SP, YAMAHA MT-10, YAMAHA XSR900, YAMAHA YZF-R1M, YAMAHA YZF-R1, YAMAHA MT-09SP, YAMAHA MT-09 TRACER GT, YAMAHA MT-09 TRACER, YAMAHA MT-09, YAMAHA MT-07, YAMAHA FZ8S, YAMAHA FAZER8, YAMAHA TDM900
Optimized with Front1Down
[How is it used?
This is an IMPRESSION with 100% Circuit running.
Was the one you received as per Image?
Yes.
This time, we dared to choose 525 without 520Conversion, but even though Steel is the same as OEM, it is MADE IN SUNSTAR. (OEM may be SUNSTAR as well.) is lightweight due to the lack of meat removal and the RubberDamper, which is present on the OEM.
Was the installation difficult?
The shop is in charge of the front replacement, so the process is basically to loosen the axle of the rear wheel, lower the tension of the chain, and then remove and install the front sprocket. The front sprocket nut has a high torque of 140Nm and the OEM is very tight, so it may be difficult to remove the front sprocket without a proper tool.
How was your experience with it?
The OEM YZF-R1/M has a secondary reduction ratio of F16/R41, but even in Circuit, it rarely goes into 6th gear, and most people change it Large. Most people change the ratio to a large one. Unless you want to adapt it to a specific Circuit, it can run in any Circuit to some extent.:As for the Set, I think Front1Down is the best solution, running with the OEM GEAR ratio, In second gear, it's hard to ride at high rpm, and in third gear it's a little heavy." You can drive comfortably in 3rd gear on the Point where you feel like you are in the middle of the road. The appearance does not change at all, but expensive Parts (Exhaust System, Suspension, etc.) I think it is more expensive and outstanding than replacing the
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
A new pure STD Nut is required for replacement. I also replaced the Washer, which is in the form of a plate, at the same time.
・90208-22002 Washer、ConicalSpring ¥616 (Tax included/as of April 2024)
・90179-22018 Nut ¥660 (Tax included/as of April 2024)
The two points are
View detail
Fits: HUSABERG FE400e, HUSABERG FC550, HUSABERG FC450, HUSABERG FC350/400/501/600 6SPEED 00-01, HUSABERG FC350/400/501/600 4SPEED 00-01, KTM 144SX, KTM 125SX, KTM 125SX, KTM 125SX, KTM 125EXC, KTM 125EXC, KTM 125 SUPERMOTO, KTM 125 MX 91-94, KTM 125 LC2 , KTM 125 GS 94-97, KTM 125 GS 91-94, KTM 125 EXE 00, KTM 125 EGS 99, HUSQVARNA TE250, HUSQVARNA TC250
It looks fancy, but it surprisingly MATCHES!
When it arrived. "That's a flashy color…." But when I put it on, it was surprisingly good.
I don't know about the quality part since it has only been run once, but I am sure it will be Large sturdy.
View detail
Fits: SUZUKI RM80, SUZUKI RM80, SUZUKI RM80, HONDA TL125, HONDA CB150R, KTM 85 SX, HUSQVARNA TC85 Large, APRILIA RS4 Replica 4T, APRILIA RS4 Replica, KAWASAKI KMX200, KAWASAKI KMX125, KAWASAKI KLX125, KAWASAKI KE125, KAWASAKI KDX125SR, KAWASAKI KDX125SR, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI ELIMINATOR125, KAWASAKI D Tracker 125, KAWASAKI AR125S
I think it's a good Chain.
The chain on my TW200 was falling apart, so I bought this one.
I was also worried about the Seal chain, but I don't drive that far and I don't have a lot of distance to cover.
That I've used it on groms and haven't had any problems.
The rest is just price. lol
The churn that came with it so far was awful.
After the replacement, it feels great.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, YAMAHA TW125
feel well
Used for Restore on TW200
It is a little more expensive than other manufacturers, but I trust them.
The one that came with it so far was terrible.
In case of TW200, it is necessary to remove the Left cover to replace the FrontSprocket.
I'll have to buy Packing at the same time.
View detail
Fits: YAMAHA TW225E, YAMAHA TW200E, YAMAHA TW200, YAMAHA AG200, YAMAHA TW125
A little tainted.
Used for Restore of TW200
I bought it to go along with the Front that I also replaced.
Maybe it didn't have to be Duralumin.
Well, I bought it.
The items are clean and trustworthy.
View detail