Reviews
Fits: SUZUKI GSX750E, SUZUKI GSX1100E, SUZUKI GSX400S KATANA, SUZUKI GSX750 KATANA, SUZUKI GSX1100S KATANA (KATANA), SUZUKI GSX400, SUZUKI KATANA 1135 R YOSHIMURA ALL MODEL
It finally arrived!
Installation is easy, just remove the OEM cover and fasten with the included bolt. The back side is not as simple as the OEM one, so there will be a gap between the Cam side and the OEM side. "What? Did I order wrong?" And I can't even put a Cushion like the one on the OEMCover, it's really just for looks! "The Yoshimura. You can't deny that it's still rather expensive, only to View detail
Fits: KAWASAKI Z750, KAWASAKI Z1000, KAWASAKI Z900 (KZ900), KAWASAKI Z750FXII/III, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1 (900SUPER4)
Proof of Engine Opening
Engine overhauled and in good shape does not need a Kick pedal, so I used it when I removed the pedal.
You have to open up the lower back of the engine to install this part. I am happy to be able to install it because it is such a crazy part.
View detail
Fashion casually, just watch out for Edge!
I've used it for 5 years with no problems at all, it's great.
My motorcycle is black, so it doesn't stand out that much, but since I'm using carbon for all the other parts, it's great to have a sense of unity.
The positioning of removing and attaching the NORMALPanel is a little tricky, but it's easy because it's just double-sided tape attachment.
But be careful not to get hurt because Edge is standing quite a bit when you raise Tank for maintenance.
View detail
The atmosphere has changed drastically.
I thought I saw a guy in a magazine once who had one on his W650, so I checked it out and found out it can be mounted on a W800.
There is a poor LeftInjection cover, but I put it on expecting protection from rain and dust and ventilation than it is.
The OEM Right is almost fully covered, so it is easy for hot air to get trapped, and the ventilation of Punching is not as good as the Large width, but it seems to have some effect.
The look and feel of the filter has changed drastically. I've been asked.
Since it is right behind the engine, near the center of gravity, it seems to catch the eye and I have been asked several times about it.
It's easy to install, and the Left Side Cover has no problem lubricating the InjectionLINK part while it's installed, and it's better to have a presence than that unnecessary OEM Cover.
One problem is that the price would be more reasonable if the material was Aluminum Alloy instead of SUS. If it were a little cheaper, I would like to buy it. I feel it can't be helped, but...
The thing itself, the texture, the unmatched machine-like vibe is unique!
It is also effective for Imechain, and can be expected to have some effect in preventing heat.
View detail
Small stone clogging improvement
I had stopped many times in the past to check for abnormal noises near the Front, but I couldn't figure it out and as a result, it was caused by a Small stone stuck in the OEM Cover.
This time I don't get any Small stones and the mud clogging has been improved. It looks cool, but the price is a bit high.
View detail
It's just beautiful!
I replaced my Normal chainCover because it was cracked, and I was looking for something sturdier than Normal with a nice shape, so I went with this one.
WM has been specializing in SRParts for a long time and has been making parts for a long time. We are sure that this is the right part for you.
good point
It looks beautiful and shiny because of buffing.
■Material:It is sturdy because it is Stainless.
The Chain is easy to see, which improves serviceability.
A bad point
If dirt gets on the Cover, it will be noticeable. Please clean it frequently.
I'm happy with the result, because it's easier to maintain and dress up the chain.
There are some custom parts that remove the chain cover, but it will affect the durability of the chain if there is no cover on the chain.
View detail
With a pon.
I bought this to improve maintenance as the nut on the DriveSprocket tends to loosen easily.
I used to have to take the cover off, but now I can easily check it visually and by hand.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
It's well thought out and accurate.
I installed it on my 110cc Bore up MONKEY. because it is Takegawa's Exhaust System Up Type, I put it inside 1cm than Instruction Manual to secure the space between Coils. I prepared a new 30mm Spacer and Bolt and installed them. The accuracy is high and it was attached as calculated. Inexpensive point is also round. View detail
Class B in general. It's an item with a reason. It was to be sold at
The protrusion that seems to have been made in the manufacturing process on the Acrylic board is sanded with Paper
There are clear scars and distortions from the polishing process. "With translation. It's like being sold cheaply at
It was quality.
View detail
ทัายสั้น MSX สำหรับทะเบียนไทย งานเรียบร้อยดีครับ เรียบง่าย ติดตั้งง่าย แน่นหนา แต่เสียดายไม่มียิงเลเซอร์ หริอสกรีนโลโกอะไรมาบนชิ้นงานเลย View detail
Fits: YAMAHA WR250F, YAMAHA WR450F, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ450F, YAMAHA YZ450FX
Required for Muddy driving.
I have installed it on almost every vehicle I have ever owned.
The OEM Subroquet Cover has poor mud drainage, and when muddy, the chain can become so tightly packed with mud, stones, tree branches, and other stuff that it becomes impossible to push or pull, let alone drive.
I was afraid of that, so I stretched the Chain loosely, and this time the Chain came off and almost broke the Crankcase. (NeutralSensor was damaged.)
It looks like Bonsai Custom, but I think it is surprisingly Large thing Parts.
There will be more clearance than the OEMCover, so even if you're not a Muddy, it will be easier to wash your car on a regular basis.
Also, the Anodized is well made and is located at the bottom of the vehicle Left Side where it is less likely to face sunlight, so there is not much fading even though I have been using it for almost 10 years.
The Chromium Plating on the Mounting Bolt will peel and rust where the tool hits it, but it will come right back if you polish it.
The OEMCover's plus ticky look will also be greatly improved, so it's Recommendation.
View detail
Fits: YAMAHA NMAX125, YAMAHA NMAX125, YAMAHA NMAX150, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Exactly to Helmet in.
I bought this to prevent things from rolling around inside the Helmet in and scratching it. The fitment is It just fits. And easy. No sound like rolling around inside, no worries about scratching it, very happy with it. View detail
Accessory CaseSeat。
Sponge sheet for Accessory Case, Exactly for your car. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4)
Buy Front fork when OH
When I removed the Front fork, the corrosion inside the Headlight Bracket was so bad that I bought it to replace the Cover underneath it as well.
Since it is a consumable item, I decided to go with MRS, which has a good reputation for quality without being particular about OEM. There was no problem in the installation. I think the price is reasonable.
View detail
It's cool to look at.
If it is OEM Duct, the collar of Aluminum is attached to the position of the Bolt of photo 2 and it protrudes about 5mm, but this product is not attached. I put the Bolt into the Duct and tightened the Bolt after biting 5 pieces of Flat Washer from the inside of the Duct instead of the collar. Small Cutting more than 2 millimeters in diameter, a little hard? I applied grease at the place where the grease was applied and pushed it in, and if you look carefully, you can hear sinar and BALIBALI sound with Wet carbon. I think you can put it on if you want. View detail
Fits: DUCATI MULTISTRADA 1200, DUCATI MULTISTRADA 1200 S, DUCATI MULTISTRADA 1200 PIKES PEAK, DUCATI MONSTER 1100, DUCATI SUPERSPORT 600, DUCATI HYPERMOTARD 1100, DUCATI HYPERMOTARD 796, DUCATI MONSTER S4, DUCATI MONSTER 900, DUCATI MONSTER 1000, DUCATI MONSTER 800, DUCATI MONSTER 620, DUCATI MONSTER 750, DUCATI MONSTER 695, DUCATI MONSTER S2R, DUCATI MONSTER S4R, DUCATI MONSTER S4RS, DUCATI MONSTER 696, DUCATI MONSTER 796, DUCATI MONSTER 1100 EVO
I think it's cool
I bought it because I didn't like the OEM Sprocket cover.
So far, I had chosen CNCRACING's products, but I couldn't find a sprocket cover that I liked, so I went with Duka Motorcycle's. The Other Brand Product is red in color, and the other CNCRACING's parts have a different color scheme from the other parts. I was worried about the differences, but I don't have any problems and I don't think the Anodized Red from both companies is any different.
Installation is very easy and takes only a few minutes as you simply change into your OEM.
When it is delivered, the Material:The acrylic parts had screw holes pretty much on the edge, and one of the screw holes was damaged, and I thought about putting in an objection, but after thinking about it, I realized that clear acrylic would get chain oil and dirt, and it would be hard to keep it clean. I decided to use Carbon's stuff without Objection in it.
The construction of the Anodized part is solid.
View detail
Good job Parts!
Removing the MT-09SP Tandem Footpeg because it's in the way! I thought I was going to make my own bracket, but Magical racing sent me these great parts.
The Carbon is very stylish. I was also worried about the Bolt being cracked when I tightened it up, but it was a very large torque.
The price is very reasonable, and the costumer is the strongest.
View detail
I want a choice of sizes.
There used to be a LargeSmall size, but Lineup is gone.
The Size is a little out of sync with the desired area, but I can't help but use it.
I'm looking forward to future lineups.
View detail
It is a great tool. I don’t see stuck number on my grom. I very happy when I purchase it and thank you. Recommend products. View detail
It's a pretty good product.
The OEM product is heavy and unappealing, so we wanted to be sure to replace Sprocket and Chain when it came time to replace it.
I found this product when I was wondering what to do with all the Sprocket covers that I thought were good outside of the company because they were all too expensive.
I bought it because it looked like a pretty famous manufacturer, but Parenthesis was good, and when I installed it, it looked very refreshed and tightened up Parenthesis well.
View detail