Reviews
Purchased to install a BOX.
Installation is easy if you follow the instruction manual, and the helmet holder is also included. View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer 150., SUZUKI Gixxer 250
Impression after 2 years of use
There are 5 different types of carriers for the Gixxer 150 that are always available, but others are too tough, too weak, too expensive, etc. This one is made of a sturdy material and is good for refilling. The others are too tough, too weak, too expensive, or too many other things, but this one is made sturdily and is good for refreshing.
The material is solid and does not shake even if a 40L~ear box is attached. I am generally satisfied with it.
But this is the point of … I dare to write!
Material is not very good, and even with the cover in place, the rain still soaks in and keeps it wet, so the rust is noticeable, especially in the cherubs that are written under the box. The rust is not noticeable if you don't look into the box because of the location.
The ? front side tip of the Cap is easy to remove. The front side was lost without my knowledge. The remaining Right Side can be easily pulled off by pulling with fingers. The Right Side is probably lost, but I think it got caught and fell off when I pulled it toward me to remove the Saddle Bag. One day, I found a black round disk on the Garage. I don't know. I found out when I was storing it. I pulled out the remaining parts on the Pipe with the broken lid and attached them with glue, but they seemed to come off again, so I used a chair cover instead.
?This is the best It's kinda…" I have a Spacer and a Carrier, but if left unattended in a downpour, water will definitely get inside. I think it is probably opening too much for the Saddlebag Support Plate that can be attached at the same time. I'd better think of a way to block it.
View detail
I am satisfied
I had a GORILLA until I bought the MONKEY125, and I wanted to get closer to the Classical Image, so I bought this product. I am happy with my purchase. View detail
Gorgeous.
I think it is the Large type among OEMOption and others.
Installation is easy, but there are some situations where it may get caught when getting in and out of the car because it is a large type.
Please consider those who have concerns about the high Seat height of the car.
View detail
Beautiful product
[How is it used?
Attached to Multi Wing Carrier.
Was the one you received as per Image?
Very nicely cut out Rubber sheet.
Was the installation difficult?
Please peel off the release paper little by little according to the Instruction Manual. I had a hard time peeling it off all at once.
How was your experience with it?
I put a small cold box on the Carrier and it did not scratch the Carrier.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
None in particular
View detail
Well
I thought the fit was good.
The installation was a bit of a hassle as the color tends to fall off when done by one person, but it was difficult enough to install in about 10 minutes.
I think that the product itself is not Beauty because of the lack of waste treatment when painting and welding.
The function itself seems to be fine, but it seems to be loose.
View detail
![[K TOUR] Rear Carrier](https://img.webike-cdn.net/catalogue/images/107660/80-539-11220_1_TS.jpg)
It's best
Because it is small in size, it seems difficult to lift luggage.
The quality is good and the overall balance seems good.
It creates a pretty look and looks better than when it was original.
It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat.
Thank you for the fast delivery. -------------------------------------------------- -------- Because it is small in size, it seems difficult to lift luggage. The quality is good and the overall balance seems good. It creates a pretty look and looks better than when it was original. It cannot be installed on the Ape 100 seat and fits perfectly on the Ape 50 seat. Thank you for the fast delivery. Powered by Google Translator
View detail
Fits: HUSQVARNA SVARTPILEN 401, HUSQVARNA VITPILEN 401, HUSQVARNA SVARTPILEN 200, HUSQVARNA SVARTPILEN 125, HUSQVARNA SVARTPILEN 250
The best choice for waterproof bag storage
It was useful during long distance tours.
Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters.
The design is simple, so it doesn't look too distracting.
Both 1st and 2nd generation fillens can be used. -------------------------------------------------- -------- It was useful during long distance tours. Since the rear seat of the Svartpilen is short and narrow, this carrier can stably hold a waterproof bag of about 40 liters. The design is simple, so it doesn't look too distracting. Both 1st and 2nd generation fillens can be used. Powered by Google Translator
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Classic and cool.
Installed on SR400Final edition.
It fit without any problems.
Anyway, I am very happy with Classical.
I installed the Side Back on the Left Side, but the Back interferes with the Chain.
I gave this place 4 stars because it was unexpected.
Even with that, I am very satisfied with the product.
View detail
It is a solid making
When installing, it was a bit of a hassle to assemble the auxiliary fixture to remove and attach the Rear Fender, but other than that, it was easy.
It is well made and useful.
View detail
The 6-point clamping is strong enough. But there are a lot of places to remove when installing.
Satisfaction with installation is ◎
The 6-point fastening with 4 seat rails and 2 tandem step holders seems to be strong enough.
The instruction manual says Top case is limited to 32L, but we installed 47L at our own risk.
Installation is a bit troublesome.
Seat Cowl, Rear Fender, Tandem Footpeg, Blinkeretc. wiring needs to be removed.
The instruction manual can be downloaded from the ManufacturerSite, so you might want to take a look at it before you consider it.
View detail
KIJIMA Assist Carrier
The assist carrier feels like its a "stock" option of the z650rs, fits the bike perfectly. The paint on the metal is very similar to the frame of the motorcycle, though the welding can be improved, i notice some rough portions on the welded parts. Installing is easy and the diagram is clear.And to those who are wondering if the passenger will feel the metal on the side of the carrier, its not going to impede the sitting position of the passenger and can be used as grab rails, all in all, a good product. View detail
Fits: BMW R nineT, BMW R nineT Urban G/S, BMW R nineT scrambler, BMW R nineT Racer, BMW R nineT Pure
UrbanGSParis-Dakarization
I wanted to add a top case, so I did. It looks good and sturdy. View detail
Fits: BMW R nineT, BMW R nineT Urban G/S, BMW R nineT scrambler, BMW R nineT Pure
UrbanGSParis-Dakarization
I bought it for Single Seat. I bought it for Single Seat and now it is Stock because it is Tandem. View detail
Kawasaki genuine Rear Rack
This is the genuine Kawasaki Rear Rack that everyone knows. This is for people who value appearance. The loading area is narrow and has a trapezoidal shape when viewed from above, so you may need to be creative when loading larger items. If you often go on long touring trips, we recommend bikes from other manufacturers (Daytona and SP). I only use it for commuting, so I'm very satisfied with this. ---------------------------------------------------------- This is the genuine Kawasaki Rear Rack that everyone knows. This is for people who value appearance. The loading area is narrow and has a trapezoidal shape when viewed from above, so you may need to be creative when loading larger items. If you often go on long touring trips, we recommend bikes from other manufacturers (Daytona and SP). I only use it for commuting, so I'm very satisfied with this. Powered by Google Translator View detail
ninja400 2018 Rear Carrier
[How is it used?
Install SeatBack
Was the one you received as per Image?
Street Image
How was your experience with it?
Is good
[Points to note]
It might be better to have someone from Support to do the installation.
How did it compare to other products?
I don't know, I haven't compared.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Even though it's only for car models ….
I purchased it specifically for my car model, but could not install it without modifications. View detail
EnduranceRear Carrier for GROM late model
Installation is very simple:remove the Seat, push out the four hidden hole caps, and attach them there with the included screws.
Furthermore, the optional Helmet holder can be attached to the Carrier.
The Rear Carrier fills the empty space at the rear of the GROM and has a good design. The load capacity is 8Kg, which is stronger and more practical than the Honda OEM product. It was a good decision to buy it.
View detail
Installation review
The original luggage rack was too big, so I bought it to replace it. It was easy to install and the overall finish was good. It would be nice to have a seat that fits perfectly.
After replacing it, it is compact and pretty. It says the load is 5kg, but I wonder if tandem doesn't work ------------------------------- --------------------------- The original luggage rack was too big, so I bought it to replace it. It was easy to install and the overall finish was good. It would be nice to have a seat that fits perfectly. After replacing it, it is compact and pretty. It says the load is 5kg, but I wonder if tandem doesn't work. Powered by Google Translate
View detail
Tandem seat can be installed with Compact
The paint texture is also high, making it Compact and Stylish.
I am satisfied with the rigidity of the Carrier and its use for Tandem.
View detail