Reviews
It becomes more KATANA-like.
The OEM screen is small, but if you install YOSHIMURA's WINDArmour, it will improve the parenthesis even more.
The production is also as expected of YOSHIMURA, and is so matched that it would be fine if it were OEM.
I also feel that the wind is not affected by it.
View detail
Reliable Manufacturer
I have installed this screen on a different motorcycle, and it is a good screen in terms of both fitting and quality. View detail
The change in appearance is 80%.
NINJA400 (2023) I installed it in
OEM [Color] From Clear [Color] The Smoke gives a tighter appearance from the front.
The windproof effect on highways and windy days is I think I might have changed, if you ask me." It is a degree.
The texture is slightly cheesier than OEM as it is thinner.
In general, I think it's more than enough if you divide it into fashionable Items.
View detail
Fits: HONDA PCX150, HONDA PCX
Windproofing, though.
As far as I have been able to find out, I think this item is the LARGEST as a windshield. (At the time of purchase)
I think the windproof effect is solid in the Large size range.
However, in the summer, when parked in the sun, the light was concentrated on the Screen and the inside of the Screen melted.
It is possible to countermeasure this problem by placing Towel or other material between the two, but be careful, as the entire Towel may burn if it is not properly placed.
View detail
Increased windshield effectiveness.
I purchased this product for the purpose of reducing wind effects when driving at high speeds.
OVER Separate Handlebars interfere with the Throttle Cable and the Tank of the Master Cylinder.
Handlebar is installed back to OEM (without Spacer).
Well nuts (C-440) are used to join the Base and Screen sections.
The experience of installation is that the posture is shallower than OEM, where the benefit of drag reduction is achieved.
The effect is not that noticeable in the normal posture, but the reduction was noticeable in the sticky prone position.
About the appearance (FRP Black, [Color] (Select Option in Clear)
The Luster feel is good, but as you can see from the light reflection in the Base area in the photo, the surface preparation is a bit lax.
if you are concerned about [Color] It is best to purchase without Clear and paint after priming.
The Screen section is not distorted in any strange way, and it is nice to know that this is also available as a Single Body.
It seems to be #Made-to-Order, so the delivery time may take a couple of months.
View detail
Satisfied with Simple Design
One month has passed since the product was installed, and the height is definitely 4 cm higher than that of the OEMScreen, and I am satisfied with the simple design that does not give the impression that it is just for show. However, the OEMScreen has a step between the cowl and the screen, so there is no difference between the screen and the cowl, but this product has no step between the cowl and the screen, so there is a difference between the cowl and the screen. In addition, the product has a quantity of Screen mounting screws.:Since it is not set, the Screen mounting Screw must be ported from OEMScreen or prepared separately. View detail
Fits: KAWASAKI ZX-25R SE, KAWASAKI ZX-25R, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
ZEROGRAVITY CORSA
I have two of them with Sports touring, but I think Long touring is Sports and CORSA is close by & looks good (lol). View detail
I am very happy with the installation and the effectiveness of Wind Screen!
[Color] I couldn't decide whether to use Smoke or Transparent.
Point of Selection I did not want to change the original image of the Eliminator to a large size by adding the Screen, and I considered the windproof effect of the Screen first and foremost, [Color] I made it a little taller and more transparent than Smoke.
Impressions before and after installation The screen looks very small, and before installation, I had doubts about the windproofing effect, but I experienced a windproofing effect that was larger than expected. Especially when driving at high speeds, the wind that used to hit my body directly became considerably softer, and I feel that stability and fatigue during driving were drastically reduced.
[… So, in a nutshell. I installed it and it was”great” to the best…. This is my current opinion….
Installation work When I purchased the bike, I read the instruction manual on the Internet and initially thought I would install it myself, but as a novice at removing the bikini cowl and headlight, I felt it would be too complicated and I was worried about failure, so I had it installed at a shop. However, I was worried that it would be too difficult for me, a novice, to remove the bikini cowl and headlight, etc., and I was worried that I might fail to do it.
Photo after installation.
Since it is a transparent Screen, I don't think the photo will do it justice, but please take a closer look at it, such as by zooming in Larger. It is not noticeable and you can feel the effect, and I think it looks very nice.
View detail
Fits: KAWASAKI NINJA650R, KAWASAKI ER-6f, KAWASAKI NINJA400R
For NINJA400R
I installed it on my NINJA400R.
It has a solid windproof effect.
The product is well made and I am satisfied with it.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZrX1200ZrX1200 DAEG, KAWASAKI ZRX1200R
Zero gravity Screen (AeroTouring)
Wind resistance is easier when driving on the highway. View detail
Perfect for XSR125
Mounted on XSR125
Smoked color is a nice touch!
Good wind protection effect.
Even a headwind will not hit your body and make you less tired.
I would recommend it to anyone who is beginning to think the wind is a bit harsh.
View detail
Item well packed!
Webike is one stop accessories shop for Motorcycle product. Especially the Magical Racing carbon! Ordered a Puig windshield for Gen 3 busa. Very fast shipment and product is authentic. View detail
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Screen
I used the OEM screws as they are, but the rubber was too stiff and the removal and installation was too large, so I would recommend getting a screen bolt. View detail
Just right.
OEM is too low and I want a little more height, but too high and it looks like Tourer, so +1.5 MARC is just right.
I prefer sharp designs to rounded ones.
[Color] Smoke so it has good visibility even when it is face down.
View detail
As generally expected
I bought this for RonTwo.
Alafi Return.
Before Return, I had only ridden Vixque and rarely rode at high speeds, so I did not understand the large aerodynamic drag of a naked motorcycle at high speeds.
I was not convinced that it was hard to run at legal speeds due to the large aerodynamic drag of the bike, even though the bike can reach the legal speed limit at high speeds in Japan without even half the speed of the Meter.
My impression is generally in line with expectations.
For driving at legal speeds on highways, the resistance is reduced considerably and it is easier to drive. Plusα speed when overtaking is also much easier, and is generally as expected. The height of the screen is a little lower than my eye level.
The only thing I feel a little minus is that the wind, which seems to come from the slit in the center, just touches the top of the helmet, and I feel a lot of noise and vibration. Once you get used to it, it's not so bad, but it's a little too large and at low speeds, it's not so bad. (in town) But I can feel it, so it might bother some people.
What was surprising was that it was originally attached to the MeterCowl as well, [Color] I was going to buy Smoke, but because of inventory and because I was going to remove it when not doing basic RonTwo, [Color] I bought the Clear, but the Screen picks up the light from the Headlight and the whole thing glows dimly. I don't drive much at night, but I think it's quite beautiful.
View detail
[Color] Smoke Screen
Installation was easy, even for an amateur. With a good density, (in Tokyo) I could see in front of me even at night, the Large size was just right, and the wind hit me not hard at all at 100km/highway cruising. View detail
Asahi windshield windproof under repair crow model
"If you are a sports fan, you can enter your favorite sports name in the comments section below. If you are a sports fan, you can enter your favorite product name in the comments section below. It's hard..
This screen is unique and has a good appearance. Also, the picture of a small monkey on the transparent glass is very impressive. It seems to be a very good product as it has the advantage of being equipped with or without a windbreak cover.
View detail
Fits: HONDA CRF250L, HONDA CRF250M, HONDA CRF250L(S), HONDA CRF300L
The thick Frame is useful!
Since it is a Small Shield, I wonder how effective the windshield is. However, in my opinion, the Level is better than no Level.
The advantage of the Large is that a Smartphone Holder, DriveRecorder, and Drink Holder can be attached to the thick and sturdy frame, making it possible to configure a cockpit on a motorcycle. Even with all of these things attached, there is no shaking at all.
It's really useful. 。 I'm glad I bought it 。 My Kok Pit is now complete.
View detail
Cool!
I think it is the coolest of all Screen's products.
Easy to install.
Since the Cover area would be left open, I plugged it with thin plastic sheeting from Black.
The windproof effect is about as good as the bottom of the Helmet, so high speeds are now easier.
View detail
UrbanGSParis-Dakarization
It's a standard Custom, Parenthesis is good. I don't know the effect of wind protection yet, but I think there is some because NORMAL is not there. The main thing is the appearance design. View detail