Reviews
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
Material:Carbon Style is the best
Sticker is a must because the plastic material of the OEM Smart key is cheap.
If you use the Smart Key Cover together, you will feel the Parenthesis even more.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
White stands out.
It will be Accent on Black tasteless Smart key.
It's also good that you can't mistake it for a spare key!
View detail
’Type 74 MONKEY
Personally, I dislike Minimoto products. But this parts is very similar to the ones I had back then, no complaints! I will report any changes after that. View detail
The perfect emblem
Nothing makes the Kawasaki Z900RS Cafe look better than this new emblem. The white letters contrasts against the lime green tank so well. An installation guide was included. You will need fishing line and an adhesive remover and lots of patience. But it is worth the effort. Thanks Webike for giving me a great price. Arigato. View detail
Good looking stickers
Looks great, thick and durable, bonds good.Doesnt get scratched easily.highly recommend this. Easyl install,Cleaned surface of forks where these were to be applied and visually aligned the print applying the center as I held both ends back with one hand. Once the center made contact and I was satisfied the alignment was good I began pressing from the center up and down the full length of the decal to assure no bubbles were being trapped until one half was fully attached. Then worked from center again the other direction until it was fully wrapped around fork.Repeat on other side. View detail
Large eyes, so it stands out and is good.
We wanted to transfer the Wing mark that was on the NC750X to the CT125.
When I tried it, it looked good and beautiful.
It was a little difficult to peel off the Sticker from the protective Seat, so I had to use a different Pin to hold it in place while applying it, but I am happy with the result.
View detail
AKRAPOVIC AKRAPOVIC Heat Resistant Silencer Sticker
[How is it used?
Buy new Sticker, no-name ManufacturerExhaust System
I pasted it in the
Was the one you received as per Image?
World famous AKRAPOVIC AKRAPOVICSticker
How was your experience with it?
Cool！
[Points to note]
Re-paste will wrinkle, wrinkle, position in one shot
Decide and pithy! Let's stick it!
Because I peeled it off and reapplied it again.
Wrinkle is in (crying)
How did it compare to other products?
View detail
Wick Visual Bureau Wick MotoGPLogo Official Ste.
As one point, I bought it and put it up.
At a roadside station where we took a break during the touring
You look great!"
Parenthesis is a great Sticker!
It looks great on the Motorcycle!"
They called out to me, "I'm sorry, I'm sorry, I'm sorry, I'm sorry.
Feel the DNA of YAMAHA motogp TEAM
View detail
It looks better after adding Emblem.
Due to the long W800 two-pad, a shorter width Emblem was selected.
We wanted to install an Emblem with Large letters, but decided against it due to its long width, which would have prevented interference with the Ni-Pad.
It is not possible to attach Exactly without bending it slightly to fit the tank shape, but it is easy because it is soft.
I had a little trouble with the positioning of the two-pad, but I think I managed to settle on a good position.
View detail
Good
It has a curved shape. So it sticks well to the curved tank. It is similar in length to the genuine emblem and narrower in width. Since it is an optional product from the manufacturer, the quality is good!! View detail
To repair Exhaust System that has fallen over
A fall damaged AKRAPOVIC's Silencer
The outer Sticker was also damaged, so it looks like a wreck.
At first I bought an external UniversalSticker and stuck it on, but the size did not fit at all and Silencer itself was thought to be a fake lol.
I knew I needed OEMSticker and found it on webike.
I forgot to measure the size when I removed the damaged OEM sticker, so I measured the mark on the sticker and chose this product in the Large body size. The material is Aluminum or something like that, so if you make a mistake once, you will not be able to use it, so please make sure to align it properly before attaching it!
View detail
I miss the colors and design.
Good old-fashioned color and design. View detail
OEM
I like KAWASAKI in Large letters,
I replaced it with this item.
OEM, so the quality of the product is good.
I love it
View detail
![[Xess] Original Sticker](https://img.webike-cdn.net/catalogue/images/13108/3-t_00103_TS.jpg)
perfectly
He said it would be better if there were both round and square designs. But I am satisfied. View detail
I did it anyway.
Slip-on lineTruck di, and I put it on!
The look of the first Silencer in the shape you're interested in is self-satisfying.
It is not too much, but it is something better. By the way, as soon as I put it up.
The material is aluminum, so it looks like a cord when peeled off.
I hope that the heat will make it disappear. I hope the heat will make it go away.
View detail
The written Size is different.
The size is written, but the length was 75mm. The width is
Is there something about Sticker, or is there a notation?
Photos are uploaded for reference.
View detail
Fits: HONDA PCX160, HONDA PCX125, HONDA DIO110, HONDA LEAD125, HONDA ADV160
I think it would have been better if it were a little thicker.
The fabric is too thin. The texture would be better if it were thicker. View detail
unconcernedly
I bought it to put on Tank.
I like the casual feel.
View detail
Fast and pretty
有效率... 好快收到心頭好
非常開心及滿意
Happy Happy Happy Happy Happy Happy Happy Happy
Happy Happy Happy Happy Happy Happy Happy Happy
Thanks very much
----------------------------------------------------------
Efficient...received my favor very quickly
Very happy and satisfied
Happy Happy Happy Happy Happy Happy Happy Happy
Happy Happy Happy Happy Happy Happy Happy Happy
Thanks very much
Powered by Google Translator
View detail
The manufacturer's logo can be added to the seat!
When I reupholstered the Seat of my XE50, the HONDALogo behind the Seat was gone and I missed it design-wise, so I bought it to put my handmade Manufacturer logo in it.
Since Holy Equip specializes in VINTAGEOff-road, Logo's period consideration is perfect for creating a 70s-80s atmosphere.
This time I purchased the larger size, but it was Exactly in the LogoSpace at the back end of the Seat.
StencilSeat is applied to the Seat fabric and sprayed with Dye-Q to complete the process. It is important to make sure the surface to be applied is clean and the pitch is tight.
In that regard, I might want to use a more adhesive Material.
Nevertheless, it is nice to be able to lineup such a useful product at a low price.
View detail