Reviews
Refresh
Used and ragged AKRAPOVICExhaust System to Refresh
We have replaced the Sticker.
I decided on Simple Type because I don't like flashy things.
There are some grasshoppers, but we decided to go with the real Sticker because it is the real AXIS La.
View detail
Almost satisfied
It's been a while since I bought it, but I put it on my Swing Arm as one point. striker's logo is my favorite, and I really like the design, The large size is just right, and the Black Swing Arm with the Red One point is a little makeover.
As usual, I degreased the object with Silicon-off before applying Sticker, but since this Sticker has almost no elasticity, it was quite difficult to apply it neatly on a curved surface. Also, the glue is not very strong, so it would be better to apply it only once.
However, the glue is not very strong, so even if it peels off, I don't think I will have any trouble cleaning up the remaining glue.
I will try again when it comes off.
View detail
OEM400fourType Sticker!
[How is it used?
We also matched the Emblem along with the Tank paint job of the coveted Yong FourSpec.
Was the one you received as per Image?
I felt that the size was larger than the Image, but I think that's just how it is.
Was the installation difficult?
Alignment is very difficult due to the diversion of another car model.
I am especially nervous because I have failed once in the past and I assume it will be used for a long time, but it is difficult for an amateur to do so, so after the application from painting to pasting [Color] I asked PRO among PROs whom I can trust for Clear finishing.
How was your experience with it?
[Color] It is said to be a Material that can withstand Clear coating.
The durability is yet to be seen, but I don't think I will ever get tired of it because it is the Design of my dreams.
[Included Parts:were they on?
Sticker only.
[Was there anything that disappointed you?
Sticker at the time may have been like this, but the colors seem a bit cheap.
Please refer to the images etc. as Tanks of ▼Yon FourDesign are still rare.
View detail
It took a lot of work.
This is only a personal evaluation.
I got my long-held dream, MotorcycleGarage.
ask a contractor to do it for you
Directly attached to the ground. Quantities in foundation assembly.:Pair (for Left and Right) The Garage was installed in a block with Brass in the The drawing shows the air-conditioner hole, the ventilation fan hole, and the GlassSash as a quantity.:Pair (for Left and Right) I had it installed on a Quantity of SprayBond type Urethane foam because condensation is a problem.:Pair (for Left and Right) I did the power supply, ventilation fan, outlet and light fixtures myself with hanghang during my vacation to avoid Cost.
The final touch was the DAYTONA Sticker, which was a struggle.
Sticker is as thin as Vinyl Tape and cannot be applied all at once.
First of all, it is hard to peel off the reflective seal. It sticks and does not come off. I can only apply it while cutting it partially with scissors.
Fill a spray bottle with water and a drop of dishwashing detergent. Shake it well and spray it on the Garage while carefully applying it. Since air bubbles will form, the only way to get rid of them is to rub them out as you apply it.
Be careful not to pull too hard or it will tear.
I wanted to put a little more up and down, but I had to match it with Seal's upper hangers to make it Gap, so I ended up with an upper temperament.
Well, I was able to put it up, so that's good.
Is it durable?
If this were the case, I thought it would be more durable to ask a private seller on Yahoo!
Design is good
If you have purchased the Garage and are not confident about installing it, you may want to ask us to do so when you make the Garage.
View detail
AKRAPOVIC AluminumHeat-resistant Sticker
AKRAPOVIC's Heat-resistant Sticker.
I think it could also be used as a Silencer for RepairSticker.
The texture etc. is also good.
I think it would be a good idea to put it on Silencer, which has nothing to do with AXIS Lapo, as a pun.
View detail
โลโก้ทอง takegawa แปะตรงไหนก็ได้ที่อยากแปะ งานดี View detail
As expected of an OEM product, it is a good one.
I purchased this for a ClassicSCRAMBLERCustom on CD90.
I was wandering around in some auctions and jungle, not knowing how to get the OldWing mark, when I noticed that it seems to have been commercialized by HondaOEMAccessories.
I immediately looked on webike and there it was!
The product I received was exactly what I wanted and I am Large satisfied.
The tank, which had already been coated in color, was lined, pasted, and overcoated with urethane.
The decal itself is thin and well finished with an OverCoat premise.
View detail
Daytona stickers
Bought 4 pieces together to save shipping fees. Quality is good as expected. Look like made from aluminium foil. The size is just nice, not too big. View detail
cute little
I found out that MOON Goods handles it, so I ordered it along with other products.
StickerQuantity:I am happy to order stock from 1pc. as well.
View detail
3M Carbon Seat
Used on GSX-R1000R
Carbon Seat made by 3M.
If you are simply looking for a carbon seat, there are many different types available from various manufacturers on Amazon.
Recent Trend (?) is on top of the Carbon Style layer. [Color] It is a Clear layered Type and looks quite Real in the photo.
But when you buy it and get it in your hands, it”s not so bad. I'm not sure how much I'm going to be able to do with it, but I'm sure I'll be able to do it.
On the other hand, this is a one-layer Carbon Style Seat with a three-dimensional fiber pattern on the surface.
It may be a step down in terms of”realism”, but”Material:I think it is a reasonable Quality for a Carbon Style Seat”.
A notable Point of this product is its functionality.
The glue side is a groove (?) The surface is processed as shown in Figure 1, and can be applied without water or air bubbles.
The adhesive strength is exquisite and easy to apply and peel off, so it can be applied and reapplied many times, and it can also be peeled off cleanly without adhesive residue even if it has been applied for a while.
Also, if heat is applied at the time of pasting, it can be pasted while extending it considerably, so it has good tracking properties.
In R1000, it is attached as an anti-scratch pad on the side of the tank, which tends to be scratched by Pants' Rivet during handling.
I had originally applied a special colorless Seat, but it quickly became tattered and didn't last long.
This product, on the other hand, is resistant to slippage and has stuck on for more than two years without any problems.
This is a product that is often Repeat in Car/Motorcycle.
The only drawback is the price, but it is a very cost-effective product if you consider that you have to repeatedly buy cheap products and reapply them many times.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
Quintessential OEM Product
It is an OEM Product, and is therefore, ExactlySize. View detail
Ideal for StickerTune
I put it on the Front fork of NORMAL.
The NORMAL is a gold-colored outer tube, so it looks pretty good.
View detail
สติ๊กเกอร์สีสวยมากคมชัดติดแน่นดีมาก View detail
The zrx400.
The Emblem was also renewed when the Tank was polished.
I heard that cheap ones have dirty white paint inside the Emblem.
This item was a Well product in the RedPackage.
View detail
DAX125Custom
Just StickerTune.
I put it up casually at One point.
I am personally concerned about it.
To those around me, I'm just an idiot.
View detail
DAX125Custom
I tried to Bracket car Tune the inexpensive suspension.
It is a fake OHLINS for everyone to see, but it is only for self-satisfaction.
I would like to have the real thing, but it is too expensive and I have given up.
I am not sure how well the Exhaust System can withstand the heat.
View detail
Wow that's cool
I put it on the side cover to hide scratches, but it looks cool without any monk. It looks a little bit shiny, but I warmed it up with a dryer and was able to apply it to the curved surface beautifully. I will add one more sheet. View detail
Just looks great on the fuel tank of my custom build
About quality and texture, I can confirm that the quality is great and the material used is PVC (Polyvinyl Chloride) with a smooth gloss finish. About the feeling of use, This set of Honda decals just looks great on the fuel tank of my custom build and even with the bike spending most of it's life out in the sun the pearl red colouring shows no signs of fading. Products to buy together, If you are a fan of Honda bikes like myself then you could also add a some apparel from the Honda riding gear range to your cart so you look the part when you're out riding. Difficulty of installation, I can say the fitment of the decals for my installation was very easy due to the surface being flat and I used a wax and grease remover before the application of the decals to help the adhesive have the best chance of adhering to the paint. Cost performance and comparison with other products, The pricing of this product is great. Your receive two decals that are of a good size and great quality from a well known brand. The pricing of decals similar to these that are part number specific to a bike will be much higher. About shipping and packaging, My order was shipped within 48 hours of me placing the order and I received a few emails advising me of the status up until the order was dispatched. I find the link supplied to track my order very useful and the order arrived within the estimated date range. Extremely well packaged and the Webike staff even added one of their stickers to the order which I'll be adding to my helmet. Any concerns, cautions, or advice when purchasing, I have no concerns or cautions when purchasing from Webike. I cannot recommend Webike enough for the majority of your biking needs. They not only sell aftermarket parts and bike gear but also OEM parts for your repairs and servicing needs. View detail
For StickerFor re-covering
I bought it for Re-covering because spII's Sticker is reversed in terms of the position of Plug insertion when I try to install it on MONKEY.
Quantity:1 Set of 2pc. so I put it on the back side.
The price is reasonable, so there is no harm in buying it.
View detail
For Dress-up
Type with release paper peeled off and letters left on, used on painted surface. Durability will be checked in the future. View detail