Reviews
![[DAYTONA x AC SANCTUARY] RCM Concept COZY Seat [COMP]](https://img.webike-cdn.net/catalogue/images/101907/24329_TS.jpg)
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
A little disappointed.
The design is great, but long touring is a pain in the butt for me personally.
As a result, I purchased DAYTONA's Gay Lupinz.
View detail
fall
If I put it on Normal seat, I think it will be a little forward and downward.
My Seat has no problem because I have removed the anchor, so the Seat is like a crescent moon, and the footing is even better.
View detail
ease of use
Very easy to handle. View detail
Style is outstanding, but 、、、、
[How is it used?
The OEM Seat of Z900RS is famous for butt pain Seat, so we replaced it with DOREMI Seat once and the butt pain was solved, but it became a little high seat and the style was too bulky, so we replaced it with Archi Seat without bean paste and with Gel Seat.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
The DOREMISeat had some rattling, but the Archi Seat was able to fit snugly.
How was your experience with it?
The texture of the outer skin is good, and the feeling of pressing with the fingers is also very sticky, so I used it with high expectations, but the footing was not improved much compared to OEMSeat, and the cushioning was not so good for the GelSeat included. I didn't get butt pain after about 2 hours test ride, but after a little longer ride, it might be painful. （I did not get butt pain after about 2 hours of test riding, but it would be painful after a longer ride (somewhat better than the OEMSeat).
[Included Parts:were they on?
Seat belt and tacks are optional parts.
I'd like to see it included as standard.
View detail
It's fine without it, but it's not tight enough without it.
[How is it used?
Mounted on Archi's Seat
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
Not difficult, but since the length is Limit, Bolt tightening while pulling a little.
How was your experience with it?
Without it, Seat's Balance looks bad.
[Included Parts:were they on?
Mounting Bolt only
[Was there anything that disappointed you?
Nothing in particular, but I wish it had been included instead of sold separately.
View detail
![[GTR-Series]Seat Assembly](https://img.webike-cdn.net/catalogue/images/120000/21_TS.jpg)
The ultimate cafe seat.
The Myoga seat is lower and better looking than another aftermarket low seat I had purchased before. My heels are 2mm from the ground where before it only my toes touched the ground. This seat is also more comfortable on long rides. It was also less expensive than the other seat. Thank you, Webike. View detail
From the eyes ??
I don't care about the texture or design, I bought it because it fits all my books, etc. neatly. I am fully satisfied. View detail
The more you use it, the more you understand! he said.
The more you use it, the more you will know! I had a sore butt after 150km of touring, but the distance was a little longer than the OEMSeat and the pain was a little less (personal opinion). The footing is a little worse when stacked because of the thickness. Also, if you don't attach the strap, the tongue will look obtrusive. View detail
Fits: YAMAHA BirdCity125, KAWASAKI W650, KAWASAKI W400, HONDA Dio110, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125, KAWASAKI W800, YAMAHA SR400, SUZUKI Gixxer, SUZUKI ADDRESS110, YAMAHA CYGNUS X, YAMAHA SEROW250, HONDA GB350S, SUZUKI swish
I do manage to get into the Seat of BirdCity125 though.
Seat at BirdCity125 is the Level that I manage to get into.
I had to pull it in quite a bit. There is no room on the back side either, and I had to repair it with a shoe pond because it was coming loose from the front side of the seat. I needed another one size larger.
View detail
Fits: YAMAHA tricity, YAMAHA Tricity 155, YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity 155
It's pretty good!
In my previous motorcycles, when I opened the seat, the handlebar interfered with the seat and tore the seat, so I bought this to reinforce the seat in advance. I was a little worried because of all the comments I had heard about the seat, but when I tried it on, I was able to install it without too much trouble. I like the YAMAHA ?Logo on it, it's fashionable. View detail
Fits: HONDA REBEL500, HONDA REBEL250SEdition, HONDA REBEL250
KIJIMAFrontReachSeat
I used to ride with a GelCushion, but it used to be a hassle with gapping, etc. The Cushion is no longer necessary, and the seating has become more comfortable.
Regarding the installation, there is too much play in the claws that insert into the body, so some modification is necessary, such as covering the claws with rubber material. I would like you to improve this part.
View detail
Tire and road surface conditions can be monitored through the butt
[How is it used?
Sports driving on mini circuits 80%, open road 20%.
Was the one you received as per Image?
Gel Coating. [Color] Used as is without blowing Clear, no problems
How was your experience with it?
Good Fee Ring in Mini circuit
[Points to note]
On public roads, the vibration will (of course) come to the buttocks, and with Gap, etc., be careful because it will hit your cervical vertebrae!
How did it compare to other products?
No comparative products were available.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
I think the size of Seat rubber is too small.......
View detail
For Automobile Inspection Case
I had to tuck it under the Seat because there was no place to store the vehicle inspection certificate.
However, the tag portion of the electronic vehicle verification had become folded in and was about to become unusable as it was, so I installed it as a countermeasure.
The size is a bit large for a car that is not an applicable model, but it is easy to install. However, the attached tape is weak, so be careful when removing it many times, as it may come off including the tape.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50Custom, HONDA SUPER CUB 50Custom, HONDA SUPER CUB70, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA SUPER CUB 90, HONDA CUB press 50, HONDA LITTLE CUB, HONDA CUB press 50, HONDA LITTLE CUB
Difficulty in weather resistance
Why is it that everyone is so quick to exchange to NORMAL? I was wondering,
Now I know why. After about a year of storage under the eaves, the surface hardens.
ParisParis and tear it up.
View detail
![Seat Cover [SK-110V]](https://img.webike-cdn.net/catalogue/images/13570/32632935_TS.jpg)
Fits: KAWASAKI ESTRELLARSCustom, KAWASAKI ESTRELLARS
Stretched well.
I bought Tucker to reupholster my old motorbike, and I didn't have the budget to spend tens of thousands of dollars on OEM or custom-made stuff, so I decided to do it myself at a low price. The thickness and texture of the seat is not as good as OEM, but I regretted that it looked cheap when I received it, but after I stretched it, it looks beautiful. The ride quality is also better. Even if I applied anti-slip coating, after applying the brake, it was gapping in front of the car but now it is stable and easy to drive without sliding. The material that looked cheap is now shiny and beautiful. I've never done any DIY before, so I'm a beginner and I'm too lazy to watch YouTube, but I can get by even if I do it haphazardly. Now I'm planning to reupholster it again and put Nylon in it for rain protection and Gel Zab under the Seat for long distance protection. View detail
Y’S GEAR (YAMAHA) Y's Gear Yamaha Single Seat
Y’S GEAR (YAMAHA) Y's Gear Yamaha Single seat cowl
We chose it as a high quality, OEMOption! is
Until the previous generation, this Seat cover, open/close, remove, and install with a key.
One-touch, I was able to do it, but from this model 2015~.
This single seat cover was installed by Bolt.
You can either carry a Hexagonal Wrench with you, or you can use it as a
We need to put Wrench in a handy place on the body of the car.
I can't take it off when I'm out and about!
It's a little weird to put away all those documents.
Looks Large satisfactory!
View detail
StyleUp is a sure thing, but the rider's body shape will affect the Riding.
The GCraft seat is a good choice for me because of the balance between the tank and the seat. The ground contact area of the seat is limited, so in a positive sense, the position is fixed and the stability is increased. If you are heavy or taller than 170cm, you may feel cramped. View detail
Fits: KAWASAKI ZX-4R, KAWASAKI ZX-4RR, KAWASAKI ZX-25R
Small modification required
I wanted to improve the grip at a track meet, but not enough to install a race cowl, so I decided on this product.
Weight is approximately 950g, a slight increase in weight from OEM (FRP).
Color because it will get dirty with Rubber replacement.:It is unpainted, but the matte texture makes it feel comfortable as it is.
The installation of the product was partially interfered with by the body of the car. The installation itself could have been done without modification, but we did not want the stress to be concentrated and cause cracking.
Fitting is otherwise good, and the rear end, which had a wide gap in the company's 10R model and seemed prone to water and dust infiltration, is now better aligned.
The attached rubber was already cut, but I beveled it with File because the Edge was going to be damaged.
The installation was a few Bolts, but it was unexpectedly time-consuming due to its location in a narrow space, and I was thinking of switching to NORMAL depending on my mood, but it was such a hassle that I didn't feel like doing so.
Wet type rubber is attached. The gripping feeling is very large, but it is difficult to shift a little while sitting on it because it grips as if it is attached.
The sponge also feels resilient to the touch, but when you sit on it, it feels chica-chic and is not suitable for everyday use.
(It's RaceParts, of course, but I was thinking of using them on a regular basis because they are a pain to replace)
View detail
Firm Grip force
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
apprehensive
Product Name
PROGRIP Pro grip Seat cover
Item Number
PG5011S-G
Vehicles
Honda CRF125F 2024 MODEL
Number of man-hours
1 hour
Required Tools
Torque wrench, Hexagon socket, Hexagon socket, Extension bar, Combination wrench, -Driver, Hammer, Pliers, ClipGun, etc.
Why did you choose this product?
I often sit on a seat, so I was looking for a seat with good grip and found this one.
Was the one you received as per Image?
It was just like the Image. It has more gripping power than I expected.
Was the installation difficult?
It is difficult. It takes hang to put it up tight without too much.
How was your experience with it?
I am Large satisfied with the firm Grip force.
[Included Parts:were they on?
None in particular.
[Was there anything that disappointed you?
None in particular.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS
It looks better, but ….
Not so effective in preventing RS ass pain ^_^ Better than OEM, but …. The price is low, so I recommend it to those who can afford it. View detail