Reviews
The BEST item for xsr!!!
This item is truly amazing, it works and aesthetically it looks brutal with top-notch finishes, totally recommended. -------------------------------------------------- -------- This item is truly amazing, it works and aesthetically it looks brutal with top-notch finishes, totally recommended. Powered by Google Translator View detail
The question is where the preference lies.
Rigidity of the car body as a matter of course (Sensation) The only problem is that you will not have the comfortable twisting feeling of the car body. However, the twisting feeling of the car body that was comfortable will be lost, so I think the point of purchase will be how to take care of that. The Gold price is too high for a trial purchase, so you need to think carefully about what you want to do with a softer chassis. Also, XSR700's suspension is worth the price, so I felt that it would be better to take care of that first. (Although the suspension change will cost much more than this part) View detail
Illusion of better driving
In the public mind, they tend to be classified as occult Goods,
This elation can only be experienced by the owner who has installed it.
The price is reasonable, but the micro-vibrations and the behavior of the Motorcycle in Curve
If you are interested, it is worth considering.
View detail
SUBFRAME Kit TYPE-2 Stupendo
As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures ------------- --------------------------------------------- As always, ACTIVE products are of excellent quality, made of mirror polished aluminium, simple assembly, inside the kit there are all the screws and instructions with tightenings and installation procedures Powered by Google Translator View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 To Racer, YAMAHA MT-09 To Racer, YAMAHA TRACER900, YAMAHA TRACER900, YAMAHA XSR900, YAMAHA XSR900, YAMAHA XSR900
The rigidity is increased, the crotch is solid, and the comfort is increased. It is worth installing. The logistics is very fast, and the overall quality is very good.
Increased rigidity, solid crotch, increased comfort, worthy of installation, fast logistics, overall very good--------------------------------- ------------------------------- The rigidity is increased, the crotch is solid, and the comfort is increased. It is worth installing . The logistics is very fast, and the overall quality is very good. Powered by Google Translator View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
Mounted on HondaCL250
When not installed, I tried driving on the New Tokyo Highway at over 100 km/h. The vibration was so strong that I thought the car body might break. The vibration was so strong that we thought the car body might break, so we gave up flying because we felt sorry for the motorcycle. After that, we installed this product and drove on the same route. Although the vibration was not zero, I was able to run at 120km/h in a stable manner. I can bank the car on the mountain pass without any worries, and I can drive at a higher pace than before with a good feeling. This is just an amateur opinion! (Lol) View detail
DIY is not easy, but it's a great product
This product does not impair the aesthetics of the bike and enhances the rigidity of the vehicle body. Mounting is difficult on your own, I recommend going to the maintenance shop. The shimmering of chrome makes the bike very stand out. If you wear this, your bike gets a different look than others. View detail
Fits: KAWASAKI ELIMINATOR SE, KAWASAKI ELIMINATOR
Definitely a different ride, expensive but I'm glad I installed it.
I found out about PerformanceDamper on the Net, and after doing some research, I wanted it.
Some of the posters said that the ride quality is improved, vibration is reduced at high speeds, etc. Some of the posters said that ”if there is a special product for your Machine, you should definitely install it…”, and some even commented that the ride quality will be above a top ranking, and I was attracted to it. I was attracted to it.
Even as an amateur, I can tell the difference in ride quality from the moment I started driving, such as the absorption of road impact from bumps, and the handling (riding) when turning on the corner. In a word, I felt that the road surface impact became ”soft” on both general roads and high speed roads, and the handling and weight shift became easier to operate on the corner. And as a bonus, I can't say anything definitive because it depends on how you drive, but my personal impression/impression is that fuel economy seems to have improved a bit.
I do not customize my vehicle to a large size, and the investment of about 40,000 yen, including installation labor, was not cheap, but I am glad that I was able to experience the positive effects and improved ride quality and maneuverability.
The installation itself does not seem to be difficult, but since it is related to the Frame and Engine, we used Webig's Pit-in for safety first and to eliminate our own concerns.
View detail
Handlebar vibration reduction
[How is it used?
Commuting and Touring.
Was the one you received as per Image?
Both the packaging and body were better than I had imagined, with a higher quality.
Was the installation difficult?
The manual is very thorough, so there are no problems. General tools are sufficient, but it might be better to use a Torque wrench since the Bolt and Nut are described as Torque in various places. (20N-m to 90N-m)
I did not know the jack-up point for replacing the shaft of the engine mount, so I jacked it up at the appropriate point, but the shaft itself came off without any trouble, so I felt that I did not need to jack up the shaft. (There are descriptions of applying jacks to the Exhaust System, Oil Filter, etc.)
The replacement itself takes about 30 to 40 minutes, and the difficulty level is about normal for those who are familiar with maintenance. However, if you do not have a torque wrench or jack, or if you are not confident about loosening the engine mount, it may be safer to take the engine to a shop.
How was your experience with it?
Vibration was dramatically reduced and the effect was easy to see.
The flopping sensation is reduced and the car feels sturdier, even on rough roads and continuous gapping.
However, I think that the vibration damping on the Frame side plays the role of Large Kinashiro, and there was no change in the impact when passing through the Large Kinashiro Gap.
[Included Parts:were they on?
Complete set shown in the product photo (Clamp, shaft, bolt nuts, etc.), Owner's Manual (Installation Instruction Manual)
[Was there anything that disappointed you?
I am generally satisfied with MinusPoint, but the price is a little over 40,000 yen (+α labor cost), so I am not sure if I would recommend it to everyone in terms of cost-effectiveness. I recommended it to my acquaintances, but they did not respond well. My impression may change depending on the level of dissatisfaction with the vibration of my car. (I don't think the vibration of sv650 is that large, but I am satisfied with it because I am of the opinion that there is nothing better than having no vibration).
View detail
Looks GOOD??
It looks GOOD.
I think it is stronger than without it, but I don't know.
The price is a little high.
View detail
Cost performance ◎
We chose the over-made model because we wanted to coordinate it with the sub-frames.
The installation was done by Shop.
Material:Polishing was selected, and the connection with the sub-frame is now shiningly gorgeous.
Custom feeling is up, I am satisfied.
View detail
Custom look
It is recommended to install at the same time as the engine slider.
How does it improve the performance of the Motorcycle? But this alone will give you a great sense of customization.
View detail
It certainly works.
Looking at the frame structure of the NINJA2 Helmet 50/400, it seems to me that the Left Side conectoplate is intentionally made weaker by bending it. It is my imagination, but it may be that the torsion of the frame improves mobility. The claim is that the Damper will absorb vibration and provide straight-line stability by restricting the movement here.
As it was, the ride quality was not good, so I weakened the front and rear Suspension settings by about 2Click, which I think improved the driving stability without worsening the ride quality.
I am a dull person who cannot tell the difference with a slight change, but I can certainly feel the change. It may be too much to say that the driving has become more luxurious, but I feel a sense of stability.
I am tuning the front and rear suspension with Technics or NITRON, but if you put it on a vehicle with Normal suspension, I think the original uncomfortable ride and thrust will be emphasized. However, if you use NINJA2 Helmet 50/400, it may be good for those who don't feel bad ride quality.
View detail
Parenthesis good!
I installed it and I am satisfied with its appearance and Parenthesis.
However, the Change Pedal and the sub-frame interfere with each other because the engine is set to 125cc, and it seems that some ingenuity is required for installation.
View detail
Jack-up required
When you look down while straddling it, it has a cool Machine feel to it.
I am quite satisfied, but there is a caveat.
Although not mentioned in the Instruction Manual, the Engine must be supported by a Jack or the Bolt may not fit.
Specifically, when removing the OEM FrontEngineMounting Bolt and replacing it with the Engine Mount Collar Bolt, the Engine was lowered and the Bolt did not fit properly.
To prevent this, the Engine must be supported by Jack.
If it does not fit easily, fine-tune the position with Jack and never forcefully tighten Bolt.
You should really be careful because the worst that can happen is that the Engine side will be damaged and you will fly hundreds of thousands of dollars for repair and replacement.
Even if you ask Shop to install it, it is safer to ask a reliable place such as Plaza.
The Instruction Manual does not list the tightening Torque, so there is also a risk in that regard if you ask a contractor who does not refer to the Service Manual.
View detail
Well, yeah.
I don't like that the Bolt on the Front side can have a little gap.
It is recommended that two Jacks be used so that the Engine does not Gap.
I don't like the point where the Bolt paint peels off with Wrench when tightening.
View detail
Even a custom novice could install it.
I installed this product on a CT125 JA65, and although I am new to customization, I was able to remove the existing frame and install this product without any trouble. Although the Instruction Manual mentioned that there is an upper and lower joint frame, it was difficult for a layman to understand the diagram for distinguishing between the upper and lower frames. It was difficult for a layman to understand the diagram for identifying the top and bottom. I thought that only a person who could read drawings could understand it. Apart from my impression of the product, I was also not impressed that I could finally buy the product more than three months after each Site listing began. View detail
Fits: HONDA REBEL250, HONDA REBEL250S EDITION, HONDA CL250
I'm almost satisfied.
Exhaust system was changed from front pipe to MORIWAKI.
The vibration and other factors had already been improved because of the replacement of the
Frankly, it was hard to tell the effect.
Speed at which strong vibration occurs at high speeds is 3 to 5 km/h
I think it has grown.
I definitely felt that the rigidity of the Frame was slightly increased.
I have seen the video etc., and it has a very good reputation.
The more novice you are, the less likely you are to expect too much.
I am sure we will see the effect after long-distance, high-speed driving, etc.
I did the installation myself, but it is definitely better to have a store do it for normal people!
There is a high TorqueBolt attachment and removal of Engine Jack-up and Engine hanger bolt.
There is Torque management, and a reasonable selection of tools, including a hexagonal box wrench,
It would be difficult without knowledge.
As for the look, it is very good as it attaches to the lonely Engine surroundings.
It would be better if there was a Plating Specification or something like that.
View detail
Takegawa Sub Frame Kit installed
The Sub Frame Kit was selected because we wanted to keep the width of the CT125 to the sides of the vehicle, and the volume is slightly increased due to the larger pipe diameter. If you tighten the bolt first, the Under Guard will not be attached. View detail
2017 CB1100EX Active Frame
Excellent product shipped all the way to Canada very promptly. It is a quality item that I look forward to installing. Customer service from Webike was also excellent and I already have a list of other items that I will be buying from them. View detail