Reviews
The Grip is slimmer and easier to drive and operate.
[How is it used?
Replaced with Handlebar.
Was the one you received as per Image?
It is made by Honda and the texture/material is excellent.
Was the installation difficult?
I asked Right-arm in Nishi-Tokyo City, and I feel safer asking PRO to do it.
How was your experience with it?
It is slimmer and easier to grip than VmaxOEMGrip.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
I asked PRO to install it, so there is nothing special about it.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
A little short, a little thick
I installed it on a ZrX1200ZrX1200 DAEG and it was a little short in overall length.
I think 125mm is just right. i bought some Sponge from Home center and filled the gap.
The thickness is about 33mm compared to about 30mm for OEM. It is just right for me. It may be too thick for some people.
View detail
Hazard.
It is easy to install., No problem, good product! View detail
please note
OEM Grip Heater Installation is not easy, the included bolt does not reach the handlebar weight, and even if the handlebar weight is removed, it cannot be installed with the Included Parts:. View detail
Neat around the Stem. I'm glad I bought it.
The Flasher is built into the x2Protector, and by removing the OEMBlinker, the Stem area is refreshed, making maintenance around the Stem area easier. View detail
Fits: HONDA GB350, HONDA GB350S
I think COSPA is expensive
I bought a new car with the new Type added and I replaced it.
The bend of Lever was good and it was easy to finger.
Clutch side rattles have been reduced and the clutch is easy to grip.
Some products are expensive, but Quantity:Pair (for Left and Right) So I think the cost performance is high.
View detail
Fits: YAMAHA MT-07, YAMAHA MT-03, YAMAHA MT-25, YAMAHA XSR700, YAMAHA FZS1000FAZER, KAWASAKI Z1000, KAWASAKI Z800, KTM 790 DUKE, KTM 390 DUKE, KTM 250 DUKE, KTM 125 DUKE, KAWASAKI ZX6R, MV AGUSTA BRUTALE, SUZUKI GSR600, SUZUKI GLADIUS 650, MV AGUSTA F4, APRILIA SHIVER 750, APRILIA RSV1000, HONDA Inner diameter 18-19.5mm, DUCATI MONSTER 821
Parenthesis looking good
[How is it used?
It is a 100% Circuit run.
Was the one you received as per Image?
Yes
Was the installation difficult?
It is completely Bolt On.
How was your experience with it?
I have not actually experienced the effect, but the texture of the shaving is good and the finish is beautiful. I am highly satisfied with the look and feel of the Race ish.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
(An Adapter Kit (sold separately) is required for installation depending on the car model.
View detail
Fits: YAMAHA DRAG STAR 400, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-25, YAMAHA MT-03, YAMAHA MT03, YAMAHA XSR700, YAMAHA XSR900, YAMAHA TRACER900, YAMAHA TRACER900 GT, YAMAHA BOLT, YAMAHA MAJESTY250, YAMAHA MT-07, YAMAHA MT-09
Just right Custom
I installed it on my YamahaBolt and it looks great with the Round Type, a little less visible than the OEM but not hard to see. View detail
Fits: HONDA CBR400R, HONDA CBR600RR, HONDA CBR650F, HONDA CBR650R, HONDA CB650R, HONDA CB250R, HONDA 400X, HONDA CB125R
Blue sky reflected in the Mirror
The purpose of purchasing the product was to improve rearward visibility when merging lanes.
Immediately after receiving the product, we started installation. First, check the approximate position by placing it on the OEM Mirror. After degreasing the mounting surface, peel off about half of the protective seal on the double-sided tape of the Mirror to be mounted, and slowly apply the tape,
One SideIt took about 5 minutes. The dimensions show a slight gap, but it did not bother me at all while driving.
I bought the Blue color this time and I think the color is good. I went out after noon and the sky was a little white, but when I looked through Mirror, I saw the reflection in the Blue sky as seen in the picture and it lifted my mood. Unexpected effect. I have not driven at night, but I feel that the visibility is not bad even when driving in the tunnel, and I do not feel dazzled by the headlight of the car behind me.
View detail
![Vehicle Exclusive Throttle Kit [TYPE-2]](https://img.webike-cdn.net/catalogue/images/38974/T2-10_TS.jpg)
Holder appears, who is Rust getting when he opens the box.
I opened the box and found a Rusting Holder in it.
Maybe they were trying to make it in time for the holidays,
Obviously it's used, so I think people will be angry.
View detail
The product was exactly what I expected.
This is the third time I've bought U-KANAYA's Lever,
I decided to use a short type for the first time because the car to which it is attached is a Grom (JC92) and it is small in size.
The look was quite Refreshing and the feel of the operation was perfectly fine with three fingers.
The quality was satisfactory, as I had already experienced with the previous two times, so I was satisfied with the quality I expected, although there were no surprises.
View detail
If Switch Refreshing,
It would be perfect if the Switch could be embedded! View detail
Fits: SUZUKI V-STROME 650XT, SUZUKI V-STROME 650V, SUZUKI V-STROME 1050XT, SUZUKI V-STROME 1050, KTM 890 ADVENTURE, KTM 790 ADVENTURE, KTM 1290 SUPER ADVENTURE R, KTM 1290 SUPER ADVENTURE S, KTM 1090 ADVENTURE, HONDA MSX 125 GROM, HONDA CRF 300 RALLY, HONDA CRF 300L, HONDA CB 125R, HONDA CB 125F, HONDA CB 1000R, DUCATI MULTISTRADA V4 S SPORTS, DUCATI MULTISTRADA V4 S, DUCATI MULTISTRADA V4, BMW G350 GS, BMW F850 GS ADVENTURE
ARGONHand guard
[How is it used?
I had an Africa Twin OEM hand guard on it, but I didn't like the color, so I replaced it.
The deciding factor for the Largeest was that the color that matched the car's body color was an Outlet item and was quite inexpensive.
Was the one you received as per Image?
It is more luxurious than the OEMHand guard and is as per Image.
Was the installation difficult?
It is easy to replace if you have the right tools.
However, ARGONHand guardSingle Body cannot be installed on X-ADV.
A Mount Kit for Africa Twin must be purchased separately.
[Included Parts:were they on?
Everything needed for installation is included.
As mentioned above, a separate Mantle Kit is required to attach to the X-ADV.
[Was there anything that disappointed you?
The hand guard has a gimmick to spread up and down, but even if it is spread, it will naturally return to its original position.
The Bolt is fixed and seems to be adjusted by retightening.
It would have been great if it could be fixed in the open position.
[ITEMS TO BUY TOGETHER
Mount Kit for AC 24836 is required for installation.
View detail
zeta bar rise kit
I love the fast delivery. I also praise the meticulous packaging. It's before installation, but I feel that the product is in very good condition. It's not comparable to the one made in Chi** View detail
Better than OEM
I temporarily installed this handlebar because I had to wait two months for an archi handlebar to be in stock, but it is easier to ride than the OEM one. It is easier to ride than OEM, but the aperture is not enough. If you have a hard time with OEM, it is worth a try. If you have a hard time with OEM, it is worth a try. View detail
Satisfied
I am satisfied with the reduced vibration. I think that the operating feel depends on the handlebar, so it is different for each user. View detail
Buy extra for free shipping
Purchased this for my NSR50 that I am currently Restore. I will not need it for a long time, but I bought it in advance to get free shipping. I will need it sooner or later and the cost is good, so no problem. View detail
Vibration reduced?
I have not had any vibration from the OEM, so I can't compare, but I can say that the Smartphone Holder and SMARTDisplay are not affected. View detail
Bar handle has
I used to use 10cm Long on my HURRICANE Pipe Handlebar Kit, but it was too long, so I decided to use 5cm.
Clearance is just fine.
View detail
Fits: HONDA VFR750, HONDA CB1000, HONDA VTR1000SP, HONDA CB1300SF, HONDA CBR1100XX SUPERBLACKBIRD, HONDA CBR1000RR FIRE BLADE, HONDA CBR1000, HONDA VTR1000F FIRESTORM, HONDA VFR800, HONDA CB1300SB [SUPER BOL D'OR] , HONDA CB1300SB [SUPER BOL D'OR]
Clutch operation is easy!
My Left hand, which was always bad on the way home from touring, does not hurt at all!
The grip was a little jerky with the OEM, but after changing it, the grip felt nur-nur.
Recommendation:Silicon grease and OEM Boots should be purchased separately when installing.
MASTER Boots are likely to be shredded unless they are O/H, so …. (Mine was shredded…) 。
If you are wondering about brembo's MASTER, I think one way is to try this first and see how it goes.
View detail