Reviews
Great Brake Bleeder Nipples
Have to say that I am very very happy with the product, these bleeders are beautiful in finish and looks, they work great not to mention the great looks they add to your bike, highly recommended, quick delivery from Webike Japan as well. Steve Brisbane Australia View detail
Brake Bleeders
Great product and very quick delivery from Webike Japan, have used these on my ZX14R Ninga and very happy with the finish of the product and the looks, very simple to use and makes bleeding your brakes a pleasure to do. Very quick delivery to Brisbane Australia, arrived in a couple of days via DHL, very happy and highly recommended. Steve Brisbane Australia View detail
Also in Universal Product
I purchased this clutch cover to install an oil cooler on a Special clutch cover.
I thought about using a universal product, but since the oil cooler is also made by Takegawa, I decided to use this product to unify the two.
The degree of curvature is moderate and I am satisfied with both the quality and fitting.
Although it is slightly more expensive, I am satisfied with the fact that it is made by Mukawa.
However, it would be better if other colors were available.
View detail
Also in Universal Product
Installed on TakegawaSpecial clutch cover for APE.
I thought about using a universal product, but since I had prepared an oil cooler made by Takegawa, I decided to purchase the product in question anyway.
Naturally, there were no problems with quality or fitting, and the installation process was smooth.
However, I have heard Small ear that color fading occurs after long-term use, so I am concerned about that.
It would be better if other colors could be selected if possible.
View detail
Satisfied with Banjo bolt as expected
The Pitch of Active's GALE SPEED MASTER was 1.0, so I purchased this product.
I was able to choose Screw Pitch, which was very helpful.
As a Banjo bolt, it is a Standard product with no particular outstanding features.
It would be a good choice to match the coloring of the Brake line or the MASTER.
View detail
Banjo bolt as expected!
It is an ordinary Banjo bolt.
This time I wanted to keep the Caliper surroundings in Black and Silver, so I went with Black for the banjo bolt!
After installation, I'm very pleased, especially since the Fluid isn't leaking out!
View detail
Stainless Steel
I have a SteelBanjo bolt from OEM, but I decided to go with Stainless Steel because of its appearance. I have had some experience with aluminum bolts that have been broken off in my old Torque. View detail
I need an air vent.
If the air is not snapped when the Brake is bleed off, it is air remaining in the Master Cylinder. I tap it lightly, but it does not refreshing. It will eventually bleed out. It would be best to have an air bleeder. Also, the price is too expensive. This time, I used DAYTONA's Brake hose.:2pcHose slightly contact. View detail
Great product
I received these a couple of days ago from a Webike Japan and I must say I am very happy with the quality of the item, they are very well made and I would highly recommend them to anyone who is looking for brake banjo bolts like these,. Just to let anyone know that are thinking of buying these bleeders you can not go wrong with the product, the build quality is great and service and delivery times from Webike Japan are exceptional, I highly recommend this product. Steve Australia View detail
Stainless black
I am installing Stainless Steel, Black with matching pitches along with brembo installation. I would appreciate it if the price is lower. View detail
Cheap!
Titaniumium Bolt is available at a very low price!
Will buy again!
View detail
Banjo bolt you can trust.
This is a Banjo bolt from the Swage line.
(Although many people seem to use it without paying much attention to it.) In general, there are two types of Banjo thicknesses, but the Swage line is the so-called EarlsType.
The process for selecting a Banjo bolt is as follows
Swage line or Goodridge?
Aluminum or Stainless Steel?
Is the screw pitch 1.25 or 1.0?
Whether the tightening partner is brembo or not
is an option.
Personally, I prefer the Swage line for brake hose handling, so I'm basically a Swage line guy.
Also, aluminum has a lot of color options and is relatively inexpensive, but it's not strong enough to be used as a bolt, so I'm definitely in the stainless steel camp.
Pitch and length depend on what you are tightening.
So, in my case, if I choose the Banjo bolt in order, I will end up with this product.
In fact, I have used this product many times in the past, and I have never encountered any problems with it.
If I had to pick a Neck, it would be the price.
Many people use aluminum banjo bolts without thinking too much about it, but even though it's an M10, it's only capable of applying a torque of 10N-m or so.:I feel that aluminum is too unreliable as a fastening material.
This is a product that goes against the customist's mindset of being plain and expensive, but considering the importance of using it around the brakes, I strongly recommend using a reliable product like this one.
View detail
Blue
Blue looked beautiful, so we installed this one.
The color of the corners peeled off after a few times of tightening, which is not good.
View detail
brembo
I bought this product because it is compatible with the Brembo master and Pitch.
It's not bad for the price.
View detail
exchange
In conjunction with the replacement of the caliper, we replaced it with a brembo compatible one.
The color of the corners peeled off when tightening, and since it's aluminum, you have to be careful not to overtighten.
View detail
Black
We installed black brake hose to match the black brake hose.
The color is simple and I like the color, though it is not noticeable.
View detail
Screw Pitch should be checked.
I bought this for my XJR1200's RearBrake master cylinder and thought it was a 1.0 pitch because it was a brembo, but it was a 1.25 pitch. View detail
I'll be able to air it out!
[How is it used?
When I bought it as a used car, the brake fluid was replaced in the vehicle inspection maintenance, but when I applied the rear brake, the fee ring was not good, so I thought that I could do something about it. So I decided to replace it with Air Free Banjo Bolt which can remove air completely.
Was the one you received as per Image?
Exactly as seen in the product photos.
Was the installation difficult?
I took it into the shop and had them install it and do a thorough air bleed.
How was your experience with it?
It is true that the fee ring is improved, and the response when stepping on the pedal is drilled, but the brake braking force itself is probably almost the same.
[Included Parts:were they on?
It comes with one Gasket and one Rubber cap.
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Brake fluid is also needed as it needs to be aired out. A quantity of 50ml is enough.
View detail
Required for NisshinHorizontal TypeMASTER
I was having a hard time bleeding the air out of the NisshinHorizontal TypeMaster Cylinder. When I used this Banjo bolt, air bleeding was finished without difficulty. The hose for air bleeding sticks firmly and does not come off easily. View detail
I replaced it with Brake hose.
The quality was satisfactory without any problems.
However, I felt the price was a bit expensive.
I also bought the ↓ Banjo adapter with it.
https://www.webike.net/sd/4465941/
View detail