Reviews
Fits: HONDA TLR200, HONDA TLR200, HONDA TLR200, HONDA TLR200, HONDA NX650, HONDA NX650, HONDA NX650, HONDA NX650, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA NX250 AC, HONDA NX250 A, HONDA NS50F A
Speedometer Cable Set Screw
This Screw was hard and did not turn when the Tire was replaced before, and was slightly tarnished.
With the FCB400TOverhaul, we used the Impact Driver to remove it this time.
It is not impossible to reuse it, but I had to replace it because it would cry if it stuck again.
It's inexpensive and there's nothing wrong with it.
View detail
Fits: HONDA NS-1, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR50
HRCSticker
I bought this for spare parts.
The texture of HondaOEMHRCSticker is not bad, but it is difficult to apply to curved surfaces. It is difficult to stick it on curved surfaces. If air gets in and you try to reapply it, it will tear.
View detail
Fits: HONDA NS-1, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR50
HRCSticker
HRCSticker on RearCowl side, I am repurchasing due to failure to attach.
I thought I was going to paste it so that it was nice and straight and no air would get in, but …...
I plan to repurchase, this time sticking it so it won't fail.
View detail
Fits: SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI GSX-R1100, SUZUKI GSX-R750, SUZUKI DR200SE, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GN125E, SUZUKI DR350SE, SUZUKI DR350, SUZUKI DR200SE, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI DR350SE, SUZUKI DR350, SUZUKI DR200SE, SUZUKI GSX-R750
OEM is the best
For what it's worth, OEMs are the most reliable. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YFZ-R1, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1, YAMAHA R1, YAMAHA R1, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Replaced with a new part
My first purchase from your site... Shipping was good and very fast, I used EMS... Well packed and everything arrived fine!!! Original products in original packaging in the best quality!!! Thank You Webike!!! View detail
Fits: KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS LIMITED EDITION, KAWASAKI ESTRELLA-RS, KAWASAKI ESTRELLA-RS, KAWASAKI ESTRELLA-RS, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA CUSTOM, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA, KAWASAKI ESTRELLA
ESTRELLA's Crying Place
I started Restore of ESTRELLA, which was immobilized after I stopped riding it.
I was looking for the cause of the problem I felt at the time I was riding and was concerned about the restoration of the engine.
One of the causes we considered and replaced was the Piston ring.
[Piston ring]
Simply put, it is the Seal of compressed Gas.
The Piston ring acts as a seal when compressing the fuel/air mixture inside the Engine's Cylinder. 。 This maintains the pressure in the combustion chamber and keeps the Engine's Power.
Why did you think it was a Piston ring? ◆Why did you think of Piston ring?
*Looks like it's going up Oil.
Oil is running high...White smoke from the exhaust system while driving and engine oil is running low.
This is a symptom of oil wear→ Oil leaking from the gap between the Piston and Cylinder. Then, it is possible that the Oil leaks to the outside.
Here, we replaced it with an OEM product, not a low-priced external product, etc.
Piston ring replacement procedure
(1) Remove the cylinder head.
If you drop the Camshaft Chain down, you will have to lower it below the waist, so it is better to hang it with a needle gold with tension.
↓
(2) Remove the Ring of the Stopper with radio pliers and pull out the Piston Pin.
↓
(3) After the Clip is removed, press the inside Pin from the inside to easily pull it out and remove the Piston. 。
(4) Take out the old ring. It is deformed rather than chipped.
(5) Ring is correctly set to Quantity.:Set and Install 。 The order is ExpanderRing → top and bottom SteelRail→ Top ring→ SecondRing.
? Simply assemble in reverse order.
[After exchange]
White smoke from the Exhaust System is gone.
It seems that the Oil uplift was the right way to look at it.
However, the oil leakage does not seem to have stopped.
I would like to start on the next part.
The clearance between the cylinder and piston is very small (around 0.1mm), but this small gap makes it impossible to compress the air mixture and receive combustion pressure without loss.
It seems that there are many cases of malfunctions in ESTRELLA's Initial Model (90's), and one of them is oil leakage.
Initial Model's Piston ring is thin and has low strength.
If you suspect oil leakage as well as oil rise, you should consider replacement.
Oil leaks have not gone away yet, so next we will look at the Camshaft Chain Tensioner.
View detail
Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB650F, HONDA CB650F, HONDA CB650F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F
For CB250F
Genuine product Spark (CR9E 98059-59916) Cost performance and comparison with other products Good value for money. About shipping and packaging Fast shipping and very good packaging. highly ercomended. View detail
Fits: HONDA VF750, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A, HONDA VT600C A
Very good part
Original Honda part, new. It has a beautiful finish. It's trustable. Manufactured to a high quality standard. It appears to have good durability. I highly recommend it. View detail
Fits: YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA TRAILWAY, YAMAHA SEROW (XT225K), YAMAHA SEROW (XT225KC), YAMAHA SEROW (XT225L), YAMAHA SEROW (XT225LC), YAMAHA SEROW (XT225M), YAMAHA SEROW (XT225MC), YAMAHA TT-R225 (TTR225S), YAMAHA TT-R225 (TTR225SC), YAMAHA TT-R230 (TTR230T), YAMAHA TT-R230 (TTR230TC), YAMAHA TT-R230 (TTR230V), YAMAHA TT-R230 (TTR230W), YAMAHA TT-R230 (TTR230X), YAMAHA TT-R230 (TTR230Y)
ดีครับของแท้ใช้งานได้ดี View detail
ดีครับใช้งานได้ดีมาก View detail
ส่งเร็วทันใจไม่ผิดหวัง View detail
ส่งเร็วตรงรุ่น บรรจุกล่องดีมากๆถ้าจะดีอะไหล่ แท้มีรูปแสดง หรือเป็น manual parts แสดงจะดีมากเลยครับ View detail
Fits: HONDA CB900F, HONDA CB900F, HONDA CB750S, HONDA CB750S, HONDA CB750L, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750K, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750, HONDA CB750, HONDA CB750, HONDA CB1100F
Oil change
I am replacing the seal along with the Mission oil change, but it is a bit expensive. It is just a sealing washer, but I feel it is expensive because Bolt is too cheap. View detail
Fits: HONDA CRF150R, HONDA CRF150R, HONDA CRF150RB, HONDA CRF150RB, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB400F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB600F, HONDA CB650F, HONDA CB650F, HONDA CB650F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F, HONDA CB900F
FOR CB250F
It's realy genuine and reasonable price.Spark (CR9E 98059-59916). It is Genuine. Very good packaging. Fast shipping. Thanks to the webike team. It Highly recommended. View detail
Fits: KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F, KAWASAKI KX450F
Great piston for the price
I have never been led astray on any yamaha oem part and when it came time to split the cases for a bottom end rebuild I added the oem piston kit (does require case split to install the oil sprayer). Immediate power and torque gains throughout with negligible rev impact.webike offers it at the best price. Shipping and packaging is great. Webike is too fast View detail
Fits: HONDA NS-1, HONDA NSR250SP, HONDA NSR250SP, HONDA NSR50
repapering
HRCSticker on the rear cowl.
I put a scratch on it, so I am repurchasing it because I can buy the same OEM ProductSticker.
Perhaps it is because it is not that inexpensive, but it is properly protected and packed with cardboard.
It helps that HondaOEM Product sells the same thing, but every time I buy it, I wish it were cheaper because it is a Sticker.
View detail
Fits: YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09
To correct rattling of Pedal in Rear Sets
Quantity of 1-positionRear Sets in FAZE before.:Pair (for Left and Right) The included Wave washer to prevent rattling of the pedal was not well-seasoned, so it was very soft and rattled easily. I put this YAMAHAOEM Wave washer in and it worked perfectly.:Pair (for Left and Right) I bought two for two minutes.
Incidentally, COERCE's Rear Sets are probably manufactured by the same manufacturer as FAZE, so I believe this part can also be used.
View detail
Fits: YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA R1 Limited Edition, YAMAHA R1 Limited Edition, YAMAHA R1 50th Anniversary, YAMAHA R1 50th Anniversary, YAMAHA R1, YAMAHA R1, YAMAHA YFZ-R1, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6 W/ FLAMES, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6, YAMAHA YZF-R6
Genuine Yamaha Screw Set for YZF-R6 2006
I needed to replace the front brake screw set as it the original were failing and the head was mashed nd this did not make the bike look good at all, I decided I would change these for OEM screws as they fit with the age and how it looks on the bike. I went for the standard OEM Yamaha ones as this is what would look best by far. The correct parts was found using the tools Webike provide and cross referencing with Yamaha's own schematics. Best price ever for this set of screws and better than I could source locally. With some other parts in my order, all were shipped together with EMS and arrived in perfect condition in 5 days from shipping. The parts were well packed and no damage was sustained during transit. The screws that were on the bike had gotten a little chewed up but these are absolutely perfect and make the bike now look a lot better. I also purchased a brand new front brake reservoir cover too so the job got done correctly. Works a treat. Very pleased with this purchase, thank you Webike, awesome every time. View detail
Fits: YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1M, YAMAHA YZFR1 (YZFR1FB), YAMAHA YZFR1 (YZFR1FCB), YAMAHA YZFR1 (YZFR1FCL), YAMAHA YZFR1 (YZFR1FCR), YAMAHA YZFR1 (YZFR1FL), YAMAHA YZFR1 (YZFR1FR), YAMAHA YZFR1 (YZFR1GCGY), YAMAHA YZFR1 (YZFR1GCL)
Yamaha Master Cylinder used on YZF-R1 2018
I got this as a replacement for the one that was already fitted to the R1 2018 but the seals had stared to go and the front brake was not holding as it should. The ones I have seen here are not great so I wanted to just get a fresh new Yamaha part so I jk ow it will work as it originally should do. I already have access to the Yamaha parts catalogue and this meant finding the right master cylinder was not difficult at all. The price Webike had this for was a bit of a surprise actually and lots better value that where I would usually get my parts from. The shipping cost was pretty good too and I used Fedex as I have used them may times beofre with no issues. My part arrived in about 6 days if I remember correctly. The master cylinder was packed well inside a large amount of wadding inside the outer box. The master cylinder with it being the same as I had just removed went on really fast and once I bled it all up, the front brake now works better than I remember and obviously, this is how is should work. The finish of the master cylinder is weird as it has a texture going off but this feels really nice. Well made part. View detail
Fits: YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT07, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT09, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA MT10, YAMAHA XSR900, YAMAHA XSR900, YAMAHA MT07, YAMAHA MT07
Genuine Yamaha Diapragm Reservoir Gasket for FZ8 2012
The old reservoir diaphragm was not in the greatest of condition when checking the fluid for maintenance. There was a noticible split in part of it and this is no doubt why the braking was useless on this bike. I was not going to leave it like that so decided to get a brand new one from Webike. The part was easy to find using the tools Webike provide and cross referencing with Yamaha schemaics for my own assurance. The price was excellent and better than I could surce locally. Shipped with EMS all my parts arrived in 5 days from shipping. The diaphragm came in teh usual Yamaha packet and aslo inside a bubble wrap encelope for safety. The diaphragm itself is a lovely moulded piece. Very supple and maliable which is of course needed to cope with the constant preseures of the brake fluid. Not too hard to fit as it is just a straight swap out. Now all back together, the brakes now work as they should. Give it a week and I will also bleed the brakes again. Great job, thank you so much Webike, happy customer. View detail