Reviews
Fits: HONDA CBR600 RR 07-17, HONDA CBR600 RR 03-06, HONDA CBR600 F4I 01-05, HONDA CBR1000 RR
Aluminum to Steel
I was looking for a steel one because the Duralumin one I was using was worn out, but I didn't know if there was one in 525 that would fit the bill.
Installation is relatively easy if you can remove the rear tire. If you are not confident, we recommend that you have a specialist do the work.
ManufacturerSite does not show the Haddrill conformity, so I think it would be better to contact them to confirm the correctness of the product.
View detail
Fits: HONDA APE 100 TypeD, HONDA XR100MOTARD, HONDA NSR mini, HONDA NSR50, HONDA NS50R, HONDA NSF100, HONDA NS50F, HONDA NS-1, HONDA APE TypeD, HONDA XR50 MOTARD, HONDA NSR80
Affordable Trial
Prepared for the expedition.
When going to an unusual Circuit, it is often necessary to change the final gear ratio by changing the number of Sprocket Dings.
In many cases, it is a gamble, and it is rarely decided in one shot.
So, it is good if you can read the number of hits to some extent (e.g. information from regulars), but if not, you have to run and test it by yourself.
This time, compared to the usual Home, it will be a large width and high speed course, so it is almost impossible to predict how many pins will be used.
Material:The lightweight Aluminum Sprocket is obviously better, but I don't want to waste money buying a bunch of products that I don't know if I will use in the future, so I always use the Iron Sprocket made by KITACO to test it.
Strictly speaking, the heavier weight will have some effect on the driving characteristics, but I don't have that SEVERE sensitivity, so it's not a problem lol.
I was too Long for the results lol.
Still, it is useful for TEST purposes for the future.
View detail
Fits: HONDA CBR250RR, HONDA CBR250RR, HONDA CBR250RR
It is lightweight.
I hold it in my hand when I remove the NORMAL and replace it with the SUNSTAR one, and it is just so light.
Large will be useful to reduce the weight under Spring.
The reduction of the weight under Spring will have a positive effect on the driving itself.
The number of hits is one larger than in NORMAL, which may be good for acceleration.
View detail
Galespeed Gear
Replacing the same gear as the original Galespeed bell, it must be a direct replacement, very good. View detail
Fits: YAMAHA YZF-R1, HONDA CB650F, HONDA CBF500, HONDA CBF600, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CBR650F, HONDA CBR900RRFire blade, HONDA NC700S, HONDA NC700S, HONDA NC700X, HONDA NC700X, HONDA VT750S, HONDA VTR1000FVTR1000F FIRESTORM, HONDA XL1000V VARADERO, HONDA Integra750, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher750
Happiness that there is a wide range of sizes available. I think the products hold up well.
I used to have an image of an aluminum sprocket that would run out quickly and I avoided it, but that was because I was using it on an off-road course, and I wondered if it would hold up well on an on-road course.
In my Motorcycle, I don't remember exactly to the distance, but I think I didn't replace it for 20,000 km....
That product was also XAM's Sprocket.
This time, we decided to replace both the front and rear Sprocket with a new Chain, and chose XAM because it was a minor car model that did not allow us to choose a manufacturer.
XAM is a god that provides even these end sizes.
I don't have any problems with the product, and I think it is very durable. if you have been avoiding Aluminum Sprocket, and especially if you don't drive around a lot of distance, I think you can TRY it once. I think there will be Merit because the weight under the spring will be reduced by the rotating material.
View detail
Fits: YAMAHA DT50, YAMAHA FT-1/FT-50 70-71, YAMAHA GR50, YAMAHA GR80, YAMAHA GT50, YAMAHA GT80, YAMAHA RX50, YAMAHA YSR50, YAMAHA YSR80, YAMAHA CHAPPY, YAMAHA CHAPPY, YAMAHA CHAPPY
Looks good.
It was used to replace a sprocket on a YSR80 that had been depleted on one side.
I could have used a cheaper one, but I chose this one because I wanted it to look nice.
I am very pleased with the change after the replacement, even though the original was no good.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX1300R HAYABUSA, TRIUMPH SPRINT RS, SUZUKI B-KING, SUZUKI GSX-R1000, SUZUKI HAYABUSA, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX-R1000, SUZUKI GSX1400, SUZUKI GSX-R1000, SUZUKI BANDIT1250S, SUZUKI BANDIT1250F, SUZUKI SV1000, SUZUKI BANDIT1250, SUZUKI SV1000S, TRIUMPH TIGER, SUZUKI BANDIT1200
SUNSTAR SUNSTAR Rear Sprocket Duralumin
The product is beautifully made, the weight is satisfactory, and it is very light. View detail
GSX-S125Driven Sprocket replacement
I swung from an OEM 45 to a Short, which is one up. I thought there would not be much change, but the Torque was increased quite a bit. I often stop and go in the city, so it became quite easy to ride. The ministry was Cospa Large. View detail
Fits: SUZUKI V-STROM1000, SUZUKI V-STROM650, DUCATI SCRAMBLER, SUZUKI B-KING, SUZUKI BANDIT1200, SUZUKI BANDIT1200S, SUZUKI BANDIT1250, SUZUKI BANDIT1250F, SUZUKI BANDIT1250S, SUZUKI GSR600, SUZUKI GSR750, SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400, SUZUKI SV1000, SUZUKI SV1000S, SUZUKI V-STROM1000 XT, TRIUMPH BONNEVILLE SE
It's pretty light.
I bought it from OEM and was impressed by its light weight. I don't think the forme without meat is particularly good, but it's a matter of taste.
Color variations would be great. I don't know how durable it is, but if it doesn't fail faster than the Front, there is no problem. Basically, they are replaced at the same time.
View detail
GaleSpeed Sprocket
These sprockets were wheels specific. I had galespeed wheels on my DRZ sm . These sprocket ain't light but definitely gonna last me a long time. View detail
The GEAR ratio was also decided.
Exhaust System, Air cleaner, Ignition, and Sub computer when
I was running comfortably on an F14R36.
After adding High Camshaft, I thought it would be better to set it to Long, so I set it back to NORMAL and it was doing well.
By the way, I tried F15R36, but as I drive a lot on mountain roads, it was not good for me as the Torque feeling was diminished.
View detail
Fits: SUZUKI GSR400, SUZUKI SV1000S, SUZUKI V-STROM1000, SUZUKI GSX1400, SUZUKI GSX1300R HAYABUSA, TRIUMPH DAYTONA650, TRIUMPH SPEEDFOUR600, TRIUMPH TT600, TRIUMPH TIGER, TRIUMPH TIGER, TRIUMPH TIGER ABS, TRIUMPH THRUXTON, TRIUMPH THRUXTON, TRIUMPH SPRINT RS, SUZUKI SV1000, SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR750, SUZUKI GSR600
super ligh weight
I ordered a 520 conversion kit for my Hayabusa 1300R which include Sunstar rear sprochet duralumin 43 teeth same stock size (stoch with 530 size). The Sunstar rear sprocket has super ligh weight, full kit include DID 520 ZVM-X chain, front and rear sprocket weight only about 2.5kg, I think I've lost 50 percent of the weight. View detail
Fits: KAWASAKI Ninja1000, KAWASAKI Ninja1000SX, KAWASAKI Ninja650, KAWASAKI VALCAN S, KAWASAKI VERSYS1000 SE, KAWASAKI VERSYS650, KAWASAKI Z H2, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z900RS, KAWASAKI Z900RS CAFE, KAWASAKI ZX-25R, KAWASAKI ZX-6R, KAWASAKI 750Turbo, KAWASAKI ER-4n, KAWASAKI ER-4n, KAWASAKI ER-6f, KAWASAKI ER-6n
Lightweight &Dress-up
It is just so light. I don't feel any stress at all while riding. It looks beautiful and perfect. View detail
first thing in the past
Both Driven Sprocket and Chain were replaced with new ones, but they are unevenly worn after about 4000 km. I will replace it because it is dangerous any more, but I can't think of a Sprocket of the same Cycle as the Tire. It is better not to do it. View detail
Fits: SUZUKI GR 650, SUZUKI GS 500 E, SUZUKI GS 550 E, SUZUKI GS 550 ES, SUZUKI GS 550 L, SUZUKI GS 550 M KATANA, SUZUKI GS 650 G KATANA, SUZUKI GSF 1200 BANDIT, SUZUKI GSF 1200 BANDIT S, SUZUKI GSF 1200 BANDIT S ABS, SUZUKI GSF 1200 BANDIT S SPECIAL EDITION, SUZUKI GSX 1100 F, SUZUKI GSX 1200 INAZUMA, SUZUKI GSX 400 F KATANA, SUZUKI GSX 500 E, SUZUKI GSX 500 ES, SUZUKI GSX 550 E, SUZUKI GSX 550 EF, SUZUKI GSX 750 E, SUZUKI GSX 750 EF
Genuine JT Sprocket rear for Suzuki GSF 1200 Bandit 2001
This was purchased to complete the refurb of the GSF 1200 Bandit 2001. The front had already been changed but the customer wanted to swap out the gearing for a 44 tooth rear. The correct part was found using Webike help pages and links they offer. The price overall was very good and better than I could source locally. I decided whilst I was buying this item, I added a few other parts to the basket which meant the shipping was spread out all of the order. Cheaper than buying individual items and shipping them as is. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage. The sprocket is great quality and finished in a nice brushed steel. The teeth are clean and free from shards or extra filings. The bolt alignment is perfect. I know JT sprockets do last a long time and now the customer will be happy woth a change of gearing. All fitted and luckily with the chain also being a little longer, it did accommodate this -1 too really well with no need to remove any links. Great job, thanks Webike. View detail
Fits: SUZUKI GSX250R, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-STORM250, SUZUKI ACROSS, SUZUKI BANDIT250, SUZUKI BANDIT400, SUZUKI BANDIT400V, SUZUKI BANDIT400V, SUZUKI BANDIT400VZ, SUZUKI BANDIT600, SUZUKI BANDIT600S, SUZUKI BANDIT650, SUZUKI DESPERADO400 WINDER, SUZUKI DESPERADO400 X, SUZUKI DESPERADO400, SUZUKI DESPERADO800, SUZUKI DESPERADO800X, SUZUKI GLADIUS400, SUZUKI GLADIUS650
It's insanely light.
Chain of did (The higher ones)
First of all, it is so light that you would think it was plastic when you hold it.
And when pressed, the Rear is clearly lighter.
Also, it is now easier to SHIFT UP.
I am satisfied, but I am afraid I gave it 4 stars because I did not feel the effect as I expected, perhaps I was expecting too much, and I personally would have preferred a more subdued color.
View detail
Lighter than expected!
Drive and Driven Sprocket was replaced as well as Tire replacement for CROSS CUB.
The Chain is also brand new, so I think the effect of this is Large?
It looks good, but I don't remove the Chain Cover, so you can't see it. (Lol)
View detail
Fits: YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Renaissa (RENAISSA), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO), YAMAHA Virago (VIRAGO)
VIRAGO250 Rear Sprocket
Replaced OEMRear Sprocket.
It is inexpensive, but it is made with confidence.
View detail
High cost performance.
Compared to other companies' Sprocket products, it is of the same quality but at a lower price.
I think the cosmetics are very cost-effective.
Gold alumite also has good coloring, and it is Custom at a glance.
The fact that it can be recognized is also highly appreciated.
View detail
Fits: HONDA CR80R/RII, HONDA CR80R/RII, HONDA CRF150R, HONDA CRF150R, HONDA CRM50, HONDA CRM80, KAWASAKI D Tracker 125, KAWASAKI KLX125, KAWASAKI KX65, KAWASAKI KX65, SUZUKI RM65, HONDA CR80R/RII, HONDA CR80R/RII, HONDA CR80R/RII, HONDA CR80R/RII, HONDA CR80R/RII, HONDA CR80R/RII, HONDA CR80R/RII
Note the chain size
I bought this for my KLX125.
but please note the supported Chain size.
OEMSize is 428, this item is 420.
It is my fault that I bought it without checking it properly, but the Chain was still 428, so the mesh does not fit slightly and damages the Chain.
Specifically, at the end of the winding side, the Chain hits the pile of Sprocket and makes an unpleasant clattering sound when running.
Finally, we had to repurchase a 428-compatible Sprocket.
If it can run, it can run, but we recommend that you check the Chain size you are using before buying it.
View detail