Reviews
Most satisfying recent purchase
I have been wearing SHOEI's ADV LSize I had been wearing them, but recently the price has skyrocketed and the gold price is almost double what it was when I bought them.
I was looking for a helmet with sun visor when I came across this helmet and tried it on. I could have worn the MSize, but it felt a little small, so I decided to go with the Just fit. I bought the LS size, Helmet cover, Helmet Bags, anti-fog Shield Visor, and many other features.
I don't see the need to be concerned about JAPAN at this point! I felt that JAPAN should do more.
View detail
Lightweight! PerformanceGood !
Light! It is so light and has no problem with safety standards.
And cheap!
The product texture is also good.
I bought Blue.
Note that the actual color differs from the Manufacturer photo. (See attached photo) 。
Belt is a little long?
That's about all I care about.
It's lightweight, so you can wear it for a long time.
I am less tired.
View detail
Headache.
The first impressions here are before the trial run.
After three trial runs, but the caps are for complete westerners and I get a strong headache within 30 minutes of running.
If you hold back any longer, you will feel nauseous.
I have worn many foreign and domestic helmets, but this is the first helmet that gives me a headache.
Simpson and Icon, which came covered with foreign-made products, were Made in USA, but none of them gave me headaches.
This LS2 is made by Spain and has a European doll shape with a pointed head, not for flat Asians.
I have pain in my temples and behind and above my ears that feels like I am being squeezed in a vise.
I thought that if I kept wearing it, I would get used to it, but after three times, the result was the same....
Purchasers should consider the premise of Repair from the beginning.
The head is made narrower as it goes to the top of the head, so I will either use Sandpaper to cut the foam styrene at the temples and ears, or use Spoonetc. to crush the foam.
It is a shame because the design and construction is very good, but it is a Helmet that gives me a headache, so I do not recommend it.
View detail
I am sure you will not regret it.
I am a SHOEI believer, but recently the Gold price is too high and I cannot easily buy a helmet. I was reluctant to buy the ADV that I bought before because it cost 66,000 yen, no matter how much it was for safety reasons, but the LS2's QualityFit feeling Design I bought this helmet because I felt it was as good as SHOEI's in every way. The size is not too large and not too small, but just right. I am very happy with my purchase.
If I may say so, it was a little troublesome to remove and install the Shield Visor, including the removal of the Cover, because of the screw type.
I thought it was good enough based on that.
View detail
Price destruction!
I have been interested in LS2 Explorer for a long time, and I bought it.
Overall, I am Large satisfied.
I was impressed with how they were able to sell it at this price.
As you can see in the picture, the kit comes with a helmet bag, helmet pouch, pin lock, reflector, instruction manual, etc.
Included Parts:of the domestic manufacturer is a great Included Parts:for HelmetPorch only.
The HelmetBody is the key, but for the price, the construction is solid, and the graphics are cool.
The Inner Visor is also included, and the price is inexpensive, so I think it is a must buy.
So far, I've only written about the good things, but there are some bad points as well.
1.The silhouette of the cap is large, so if a rider of short stature wears it, he will look like he has a big head.
See Helmet comparison in the attached image.
Compared with other companies' WINS Helmet with Shield, the appearance looks like Large.
I'm 165cm tall, and my head is as big as a child wearing a helmet. (laughs)
As an easy-to-understand analogy, Arai, a Japanese two-large manufacturer, looks small in appearance, while SHOEI looks large and shapely.
It gives the impression of a SHOEI with a big head.
2.Translation (There are many flaws in the Instruction Manual that you can enter here.
It's made in Spain, so I guess it can't be helped, but there are many parts that are not fully explained.
The inside of this helmet can be removed and washed just like Japanese manufacturers, but there are no instructions on how to remove and install the important parts.
I referred to the videos on You Tube, but the large half of the FOR JAPAN MODEL videos were of the On road Helmet, and none of them were of the Off-Road Helmet Explorer.
The specs are completely different depending on the helmet model, so I couldn't use the ones for On roadHelmet as a reference.
I had no choice but to implement it by referring to overseas videos.
Removing the Cheek pad is easy, but as a precaution, when removing the Cheek pad, be sure to check where the nails on the back of the pad are located before removing it.
When installing it, I had a hard time figuring out where it went in at all.
If it were not for these two negative points, I would have given it 5 stars without complaint, but unfortunately, I gave it 4 stars.
I'm not sure if it's a negative, but for this price and quality, it's a must buy! I think it is.
View detail
Difficult to paint
The arai and shoei are L Size, but since they are made overseas, I chose XL with 1 Size up.
The cheeks are tight, but the front and top of the head are roomy.
If the Cheek pad is worn out, the L Size will be fine, but since the ear area is narrow, the Income Speaker must be thin.
Compared to the FOR JAPAN MODELManufacturer, the price is more affordable, the cost is higher, and the design is more to my liking, but the painting is not so good, and there is a lot of garbage sticking to the paint surface and paint chipping.
In particular, the chipped paint on the frontal Logo was a Level that was rejected during inspection.
Minus the fact that the SIDEBench and Sun visor lever are in the perfect position for mounting the Income, so you have to move it forward or backward to get it to fit.
View detail
Choose your size carefully
I can't complain about the features and design.
It comes with two Helmet Bags and a maintenance bag.
It also comes with a pedestal.
It even comes with a Pin Lock Seat!
Ventilation is also set in detail.
I can put the Air where I want it.
Lighter than expected for its large size, and no neck fatigue.
The fit is excellent and the construction of each part is solid.
However, the reason for the low overall satisfaction is its large size.
I've been using an XL in the domestic market, so I decided to go with an XXL just in case.
It's pretty tight and not wide enough.
No space to install Income, no space to install Speaker.
Even though it's an Adventure model, you can't use it while listening to Navigation or music.
Minus rating.
View detail
good
When I was looking for an Off-Road Helmet, I found the standard FOX, ARAI, SHOEI, etc., but they didn't do much for me.
I found a helmet that no one else would wear.
I have yet to meet BEELHelmet.
It comes with a shield, which is perfect for city riding, and the shield can be removed for use with goggles.
This helmet is also in L size.
Finally, of course, it is light and easy to breathe.
View detail
High technology interior, which is unimaginable from its monstrous design
This is the best Helmet along with Yomoya Yomoya Firefox.
I ordered it from FCMOTO in Germany to match the Grom that was given to me by a younger colleague.
The high technology interior is unimaginable from the massive design.
The fit is good, and it feels as secure as the fox V2.
I've been a fan of fox's Large, but I think I'm going to start collecting Leatt's heavy designs, including Goggles.
The size is similar to fox v4.
View detail
I think it's in the SEROW.
I bought this for my SEROW because the quality doesn't seem too bad.
The Benchoolation function was fine and there was no distortion of vision.
One complaint is that the bracket is not attached to the end of the helmet, making it difficult to attach to the helmet holder.
As for the size, the cheek part is tight, so I usually buy M, but I decided to buy L. It was just right.
I think the quality is good enough for this price.
View detail
Basically, it's hjcBase, so it's bearable there.
WR250X and WR250R, mt09ToRacer, etc., I bought it exclusively for moving around on the motorcycle at night and in the rain, etc., when carrying out tire replacement and heavy maintenance, I also own a hjcVERSION for commuting, so I know that it is a decent Helmet out there I knew. The wind guard under the chin and the Pin Lock Shield can also be used. In addition, the chinstrap locks more securely than the hjcVERSION, so I decided to go with the Gibson. hjcHelmet Large body will deteriorate in about a year, so I will use it for commuting except for maintenance and transport. View detail
It was cooler than the picture.
I thought it would be Lame.
It is a large thing that it is not overlooked in the mountain and the night, etc. though austere color was good, and it is bright color.
White is Blue, if you want to buy a new one, because it has been White for a long time.
Blue on Yamaha Blue.......
Ventilation is good, but it would be nice if the shield could be opened a little bit, so I deducted one point.
I think the shape of the head and the Size feeling is the same as a domestic Helmet in general.
(From OGK KAMUI2.... I wonder how many years I've been wearing it...)
Visor for city driving is not convenience equipment, it's safety equipment.
I think the reduction of fatigue is the most important safety.
View detail
Anyway, lightweight?
Anyway, it's light and my neck doesn't get tired.
There is also a service hole for InnerSpeaker, so expandability is good.
The chinstrap is a D-ring, which is also a good point.
View detail
It's hard to wear one for long periods of time without buying one!
I decided to buy it based on Design and price and also reading the Reviews.
The price and design is good as it looks, but the comfort is not good. I went on a 150km one way day tour, but after an hour of using it, my head started hurting and it became a large strange touring.
After I got home, I went to a 100-yen store and bought some thin Cushion material. (Floor mat) I bought a target and processed it and put it on the inside.
I'm struggling to find a way to improve the comfort and love it.
View detail
Safety first!
Was the one you received as per Image?
My car is also a Honda, so I went with Honda!
I'm happy with the image!
[How did you feel about the Fit?
It wasn't tight, it wasn't loose, and I wasn't tired from wearing it for so long!
[Was there anything that disappointed you?
I wasn't disappointed in any way.
How did it compare to other products?
No particular comparison.
[Usage]
This was my first off-road experience, so I made sure I had the right gear!
After all, I wanted to protect my head, so I chose a brand I could trust!
View detail
It's a great deal at Almighty!
Was the one you received as per Image?
I ordered these after trying them on at my local Motorcycle supply store and they were exactly as Image described.
[How did you feel about the Fit?
The Helmet I usually use is M-L depending on the manufacturer.
The YX-6 was OK in MS size, but since the main purpose was to play in the mountains, I ordered the LS size in consideration of taking it on and off in a sweaty condition, and the fit was good and easy to take on and off.
How was your experience with it?
Good design, Reasonable price and easy to use.
I hesitate to put it on the ground in the mountain if it is a high-end Helmet of A or S company, but in this price range, I can put it on the ground without hesitation (in the sense that I do not care if it gets a little dirty or scratched).
What are the specifications of the product?
The Diffuser also works well, there is a recess for the InnerSpeaker, the interior can be removed and replaced, and the fog shield is an option.
If I had wanted, an Inner Visor like W's would have been perfect.
[Was there anything that disappointed you?
if I may say so myself "It's hard to wash because you can't remove the Cover of the Jaw Belt." Is it about the same?
How did it compare to other products?
Don't compare it to the high-end Adventure Helmet from Company A or S. It's Gold for two YX-6s.
As for the Rival in the price range, I think it will be W's Ano product, but I personally think it is second to none except Inner Visor (and it is a bit lighter...)
Other items that would be helpful
The deciding factor in the purchase
Good price and Design and Fit feeling.
【Included Parts:presence or absence】.
As you can see in the picture, Body, Shield and Visor are Standard Equipment, Fog Shield is Option.
[Notes]
Belt cover on the chin is not removable, please be careful when cleaning
[Opinions and requests to Manufacturer
There are not many Adventure Helmets in this price range, so I hope it will remain in the lineup for a long time.
View detail
It's Almighty and the price is reasonable.
Was the one you received as per Image?
I ordered these after trying them on at my local Motorcycle supply store and they were exactly as Image described.
[How did you feel about the Fit?
The Helmet I usually use is M-L depending on the manufacturer.
The YX-6 was OK in MS size, but since the main purpose was to play in the mountains, I ordered the LS size in consideration of taking it on and off in a sweaty condition, and the fit was good and easy to take on and off.
How was your experience with it?
Good design, Reasonable price and easy to use.
I hesitate to put it on the ground in the mountain if it is a high-end Helmet of A or S company, but in this price range, I can put it on the ground without hesitation (in the sense that I do not care if it gets a little dirty or scratched).
What are the specifications of the product?
The Diffuser also works well, there is a recess for the InnerSpeaker, the interior can be removed and replaced, and the fog shield is an option.
If I had wanted, an Inner Visor like W's would have been perfect.
[Was there anything that disappointed you?
if I may say so myself "It's hard to wash because you can't remove the Cover of the Jaw Belt." Is it about the same?
How did it compare to other products?
Don't compare it to the high-end Adventure Helmet from Company A or S. It's Gold for two YX-6s.
As for the Rival in the price range, I think it will be W's Ano product, but I personally think it is second to none except Inner Visor (and it is a bit lighter...)
Other items that would be helpful
The deciding factor in the purchase
Good price and Design and Fit feeling.
【Included Parts:presence or absence】.
As you can see in the picture, Body, Shield and Visor are Standard Equipment, Fog Shield is Option.
[Notes]
Belt cover on the chin is not removable, please be careful when cleaning
[Opinions and requests to Manufacturer
There are not many Adventure Helmets in this price range, so I hope it will remain in the lineup for a long time.
View detail
Balance of price and quality is good.
Did you receive the item as per the Image?
Originally, Y’S GEAR's for playing in the mountains. YX-6 Zenith GraphicWhite/Black/Red However, the interior and exterior were getting very tired due to the many removals and falls at the job site, and because the interior was covered in sweat every time it was used, and the interior was washed every time it was used, Webike's Year-End Thanksgiving Celebration I took advantage of this opportunity to search for a renewal of OffHelmet for mountain play.
Since we are not going to use them for competitions such as flying, jumping, and competing at high speeds, we were considering ARAI's TOUR-CROSSSeries with Shield, SHOEI's HORNET-ADV series, OGK KABUTO's newly released GEOSYS, WINS's X-ROADIII, LS2's EXPLORER, THH TX-28, etc., etc. and LS2 EXPLORER, THH TX-28 etc., but after much consideration, I decided to go with YX-6 of Y’S GEAR, which is the same product I am currently using. (Pearl white monochrome) I've settled on
It is a different color from the Helmet I had been using, so it was exactly as I had imagined.
How was the fit feeling?
The helmets I usually use are M~L depending on the manufacturer.
I bought YX-6Graphic in L size because I had been using YX-6Graphic in L size.
In my case, if I had purchased this product for touring etc., I would have been OK with the M size, but my main purpose is to play in the mountains with Main. Frequent removal of clothing in sweaty conditions." The L size is used in consideration of the
It is a little loose, but the spec. to fit the entire interior is not too loose and easy to put on and take off, which is what I was aiming for.
How did you like it?
It is not the most advanced design in the off-road world, but it is well put together, reasonably priced, and easy to use.
I hesitate to place a high-end helmet from ARAI or SHOEI on the ground in the mountains, but at this price range, I can place it on the ground without hesitation. (meaning that you don't mind if it gets a little dirty or scratched). It is a sober Stress to be overly concerned about the Helmet you have taken off when you are exhausted from playing in the mountains.
What are the specifications of the product?
The Diffuser functions well, there is a recess for the Income speaker, the interior is removable, and although it is an option, there is also a dedicated fog shield, which is fully functional.
My personal desire would be to have an Inner Visor like the WINS X-ROADII.
Were there any disappointments?
if I may say so myself The protective cover on the chin belt cannot be removed, making it difficult to wash." It's about the same.
How did it compare to other products?
Do not compare with expensive Helmet made by ARAI or SHOEI! (Because the price of this product can buy two or more of these products.) 。
The WINS X-ROADII comes with Inner Visor and is in the same price range, but the ownership rate among my friends is too high... and I, being a twisted person, choose the Helmet of other companies! (But I envy Inner Visor). 。
Other items that would be helpful
The deciding factor in the purchase
Price, replacement parts (Interior etc.) Ease of obtaining the
【Included Parts:presence or absence】.
Helmet (Shield and Visor are Standard Equipment) 。
Pin Lock Shield is sold separately.
[Notes]
The Pad on the top of the head and cheeks is removable, but the Belt Protection Cover on the chin is not.
Please note that those who are looking for a fully interior detachable Helmet should be careful.
[Opinions and requests to Manufacturer
If there is a next model change, I would appreciate it if you could keep the price as unchanged as possible and make it with Inner Visor.
View detail
It's just so light!
I've tried them on at the store and was impressed with how light they are, but now that the market is running out of stock, I bought them. The design is very similar to the Shorey VFX and looks great. The design is also very cool and similar to Shoei's VFX. Furthermore, it is made in Japan so you can rest assured of its quality. View detail
Parenthesis is good, but...
The texture and functionality are good, but it's very small.
I wear it with a Shoei Helmet XL, but the entry is too small anyway.
It does go in, but I thought my ears were going to tear off when I put it in.
When I wore it, it didn't hurt my temples or anything, but my cheeks were chapped.
The mouth is quite roomy and comfortable.
But anyway, the entrance is narrow.
So I went with Minus2.
The design is good for parenthesis and the atmosphere changes depending on the visor, but the mouth of the head is good.
Personal Thoughts.
View detail