Reviews
Fits: YAMAHA XG250 TRICKER
Tire that does not decrease.
[How is it used?
The XG250 TRICKER tires we purchased used had cracks on the surface due to age-related deterioration, so we decided to purchase this product to replace the tires.
The cost of a tire is much cheaper than the expensive repair cost of a slippery tire that falls over.
I feel a sense of security as if it were my parents' home since I have been using this Tire for many years in my Dual PurPass car in the past.
How did you like it?
This is a tire that can be driven happily on everything from city streets to winding and flat forest roads.
It is not a heavy tire like the Block tie ya, so it is not easy to ride on muddy surfaces or on hard attack roads (depends on the rider's skill?). However, it is rather fun to ride on a little forest road if you understand that the limit point is low at the beginning of the slide.
Personally, I really enjoy winding, and with 4st single cylinder power of around 20hp, it is hard to break down (except on low μroads) and can be driven with full throttle fun, just like Radial's high grip tires. Grip feels like it sticks to the road surface." However, if the rider is conscious of the weight transfer, the tire has a good ground contact feeling, and even at the limit, it does not suddenly start to slide with a "Span!
And it doesn't decrease.
The rear side also lasts longer, but the front tire wears even less, so unless you ride frequently to work, the tires will last so long that they will harden first.
[Points to note]
From Manufacturer Precautions for use." As mentioned in the previous section, unexpected use will increase the risk, especially at the beginning of the cold season.
How did it compare to other products?
Tires of the same etc. are sold by Bridgestone and Dunlop in Japan, but both products are not as good as the Large Kina Difference There is no
One of the Merit of this Tire is Low prices." Webike's Tire is often offered at more Reasonable prices than the above-mentioned Manufacturer's Tire (except when the above-mentioned Manufacturer is on Sale), so it is always easy to get your hands on it.
Other items that would be helpful
Point and hang of installation
DIYers can use the detachable Tube bite." Please work with great care to ensure that the
If you are anxious about the work for the first time, please check the procedure carefully in the video Site before attempting the work.
If you lose confidence after watching the video, rely on PRO or a friend who is familiar with the work, "I drilled too many holes in Tube, and as a result, it would have been cheaper to hire a PRO..." This is often the case, so please think carefully and choose the best method.
[ITEMS TO BUY TOGETHER
If you don't have all the tools. Tire Lever BEETWax." Rim Guard. etc., so the work will proceed Smoothly, and the Tube should also be replaced with a new one.
In addition, an air compressor will make the work easier.
[Opinions and requests to Manufacturer
forever and ever A friend to the common man." Please maintain the pricing that you have established.
View detail
Anyway, it was hard.
The CT125 Rear tire GP-5 has 2,0mm left, so I'll change it after a few more runs, but I'm running a GWCampaign, so I'll buy the Tire while I can, and I'm in the On 9, Dirt 1 ratio here, so not completely On road, I decided to go Adventure oriented.
So, after much deliberation with the well-reputed Anakee STREET, I decided to go with D604, which has no Reviews at all, as I am a minority, and write my first Review.
In a review by a certain Large River in South Brazil, the only negative image was that it was hard and vibrated.
After touching the one that arrived at my house for a bit, I was prepared that it would be hard and tiring, as it reminded me of the T63 thing from company M.
Now, when I got it in my hands with the usual Pattern, I already wanted to replace it, and I had planned to replace it next month, but I started to do so (laughs).
As you might expect, there is a direction of rotation for installation, so we carefully checked the direction of rotation before starting work.
This is my first time to replace Tire on CUB, but I will follow the theory here.
The GP-5 has a soft bead and was relatively easy to remove.
Now, let's start the assembly.
As usual, apply a generous amount of Bead wax.
Unlike off-road vehicles, we do not want to scratch the rim, so we use rim protector while working.
It's already hard even to fit the first time!
Fit the One Side and put in the Tube. These are not so fiddly.
Turn it over and put the other side in, but it is hard anyway!
After fitting half of the wheel, I held it down with my foot and lever it in, but the remaining 20cm or so was tough!
The installation was done carefully, boldly, and by brute force.
We managed to complete the work without any holes in the tube and with a clean rim.
I ran the car for a while, and it is true that the slight vibration from the Rear has increased, but it is not at a Level that bothers me that much.
Grip is often seen as such and such, but well, it is a CUB, so it can run and stop normally.
We don't ride in the rain, so as long as the dry grip is good, it's fine!
The groove is somewhat larger than GP-5, and the block is also larger, but the tread surface and SIDE are harder, so I think it is easy to be played on the dirt.
Muddy terrain is likely to Stack if not driven well, but the CUB does not have that kind of driving ability to begin with.
If you are used to working on CUBs with Spoke wheels, and if you are used to working on them, and if you drive in an adventurous manner, recommendation.
I thought that GP-5 would be easier to work with when Puncture was done, and that in the end the standard Tire would be the best. I thought that the standard Tire would be the best in the end.
View detail