Reviews
Genuine Akrapovic Heat Shield for RSV4 2020
This was a replacement heat shield that I needed for the RSV4 2020 that got a little damage after a small spill. The exhaust was perfectly fine but the heat shield took some scratches and looked bad. Finding the right one for this model bike was super easy as I just searched for the bike and then the brand I wanted into Webike and thisd came up. Very good on price too and slightly cheaper than could be sourced locally. I did have a couple of other small parts in this order too and shipping them all together saved on cost. My order was shipped using EMS and arrived safely in 5 days. The packages in side the box were very well padded and there were no damages to anything inside. This heat shiled is a carbon fibre one and although they are very tough, you still need to be careful not to scratch the outer coating. The heat shiedl itself is a gorgeous piece of craftsmanship and looks absolutely stunning. The weave is precise and the finsih is super glossy. The fitment was a piece of cake and went on smoothly and without a hitch. As I said, there was nothing badly damaged with the exhaust, it was literally a few scratched that would not buff out. Very happy with how this now looks and the bike is back to how it should be, pristine. Great work Webike, thank you. View detail
Dedicated Welding Parts
As an amateur, I appreciated the Large change in the fact that we could handle welding parts specifically for the Exhaust System. View detail
I knew RR had to be this way.
Since we mainly specialize in circuits, we do not need a tough tandem footpeg, so we installed a bracket from the same manufacturer. The silencer is not shaky during driving because of the 5mm thickness of the plate. View detail
like a typical (e.g. of a woman)
I got my wish and installed it.
It is more solidly built than it looks and seems to be able to withstand Tie Down austerity.
This bracket is more suitable for the GSX-R than the Tandem Footpeg.
The Instruction Manual is also easy to understand, and I don't think the installation will be confusing.
View detail
Simple and Cool!
I wanted to remove and refresh the Tandem Footpeg, so I installed the Exhaust System at the same time I purchased the Exhaust System. It was a little bit difficult because the installation holes didn't fit. I am satisfied with the appearance of the Refreshing and the fitment! View detail
Good quality at an affordable price.
It is a low-priced but high quality product and comes with Bolt and other accessories, making it a highly satisfactory product. View detail
Ladybird exhaust bracket
Great upgrade for the cb13 if your running without pillion pegs this looks good and is well made,it didn't take long to fit very pleased with this hanger View detail
GSX-S125 and YOSHIMURA are also acceptable
[How is it used?
Tandem Footpeg removal for weight reduction.
Was the one you received as per Image?
Material:Aluminum and lightweight, it served its purpose.
Was the installation difficult?
I am a beginner, but no problem. It may be an individual difference, but the welding part on the Bracket Exhaust System side slightly interfered with the exhaust bracket, so I installed two 0.5mm washers between them.
How was your experience with it?
In addition to the weight reduction purpose, I liked the look of the Race ish.
[Included Parts:were they on?
Manufacturer logo batch, instruction manual
[Was there anything that disappointed you?
Nothing special. The other company's Black board type looked good, but I think this one is also Race ish.
YOSHIMURA was OK, but there may be individual differences, so it may be safer to prepare a washer for adjustment.
View detail
Yoshimura Silencer Bracket Set for ZX-25R
This was a replacement for the standard exhaust bracket that came on this bike. Not that there was anytrhing specifically wrong with the stock one but it is big and a bit weird looking and the customer wanted to add some bling factor. FInding the right Yoshimura one for this model was already gotten by the customer who asked for this specific one. Not a problem, this makes my life easier not having to search for compatible ones. The price from Webike was the best I could find anywhere. With some other parts in my basket already, I had them all shipped together which saved on the shipping cost as the other parts were really small. My order arrived in 5 days from being shipped which is exceptional to say the least. The silencer bracket cme in the Yoshimura packet and had everything needed to switch the original to this. The bolts were present and well machined. The bracket itself is finished with a lovely satin black paint and feels great to touch. Fitting was surprisingly easy as it is literally a couple of bolts and that's it. The overall look of the silencer with this bracket on is superb. Very nice. View detail
Appearance Refreshing
I was looking for a bracket for a while to remove the OEM footpeg, but I bought this one. The position of the exhaust bracket is slightly offset from the OEM position. View detail
Design is good
Simple and can be mounted to allow for subtle orientation and positional modifications. Good. View detail
Fits: HONDA CBR1000RR-R SP, HONDA CBR1000RR-R
For weight reduction
I never tandem with RR-R, so I installed this one to save weight, and it is compatible with both Normal muffler and Slip-on Silencer. I installed Babyface racing hooks with it and had no problem. The quality of AXIS Lapo is the best. View detail
Stylish
IKAZUCHIExhaust System and Quantity for CBR250RR:I attached it as a set, but it is better to prepare only the collar because a collar is needed between the bracket and the exhaust system. View detail
Fits: KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZRX1200, KAWASAKI ZRX1100
Ladybird excellent upgrade
Very pleased with overall appearance and quality. Installation was very quick and allowed me to remove passenger pegs. This gives a much 'cleaner' look than stock! View detail
Top quality, looks great
This is a top quality item. The welding is handmade and strong. The look is perfect for the bike. The new spar weight 150g, the pair of pillion supports it replaced weight 1500g, a big improvement. The piece fit perfectly to the standard exhaust and frame, millimetre perfect. Great value-for-money, thanks Webike and Wirus Win! View detail
For the company's Oval silencer
I was asked by an acquaintance of mine who rides a ZrX1200 DAEG to purchase one on his behalf.
It seems that we got a DiabloOval silencer from K-Factory, so we decided to use this bracket, which is almost exclusive for this bracket, because the normal tandem/exhaust bracket would not fit.
Of course, I was satisfied with both the angle and length of the angle and the length of the length of the length of the length of the length.
However, Material:I know that Titanium is a good product, but it is expensive to spend more than 20,000….
View detail
Can also be used with OEMExhaust System
The photo is in Black, but please keep in mind that the Lineup is only Silver at the time of posting the Impreza.
The only color available was Silver, and I wanted Black to match the Frame, so I made the following inquiry to OVER.
Q.Are there any plans to manufacture Black
→A. None.
Q.Is it possible to make a special order for Black?
→A. Acceptable at the time of remanufacturing after the current stock is paid out, but the timing is undecided due to the large current stock.
At the end of the exchange, I was referred to ReAnodized Treatment to Coken, which I used.
The cost at my time was 10,000 yen.
If you do not tandem and do not use a loading hook, you can lighten the weight somewhat by replacing the hook.
The OEM Exhaust System can be used, and of course the OVER Exhaust System can be used, but the OVER Swing Arm is a little thicker and the clearance is not so good, so we added an extra 4mm to the collar that comes with the OVER Exhaust System. The OVER Exhaust System can of course be used with the OVER Exhaust System.
The screw threads of the Bolt for fastening the Exhaust System with Bracket remain more than 1cm, so if you are concerned about it, you may procure just the right length yourself.
When fastening the Tandem Footpeg to the Frame, it is recommended to apply a medium-strength screw lock agent.
View detail
Fits: YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR400, YAMAHA XJR1300
Up type Exhaust System is this Bracket.
I purchased Nojima's Up type Exhaust System and only purchased the Bracket during the BackOrder.
Exhaust System Kit includes Bracket, but
I went out of my way to purchase it separately to anodize it to my liking!
As you can see from the pictures, the new one is still beautiful.
Polished.
Urethane [Color] Clear paint would make it last longer.
Is it solosolo stock limited anymore since it is car model specific?
Bolt Nut is also included, which is helpful (although I don't use it).
In case you're wondering, it's the first Yamaha XJR1300.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z900RS CAFE
Nice look
I painted it a low gloss black. I installed the bracket without the provided spacers. This pulled the bracket in 12mm so touching it with my right heal isn't as annoying when my toes are one the peg. This bracket does send a minor vibration through to the handle bars as the muffler moves about on rough roads. View detail
Refreshing, lightweight
Installed to participate in the NinjaTeamGreenCup.
Safety and weight reduction are effective.
View detail