Reviews
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Single Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type
Thanks for the quick response to the damage during the Carburetor setting!
I am relieved that it is a KEIHINOriginal product.
However, it seems a bit expensive.
View detail
Definitely OEM
I bought it for a CR33 setting and the shipping was fast and helpful. View detail
For CRBig body
As this is the first time to set up CR Big body, I purchased 51 series Needle from 5177 to 5179 as a standard number. Unlike Small body, needles are not common at all, so I bought Needle for the first time in a while.
In the case of KEIHIN's Carburetor, it is easier to buy all the setting parts at once once once you have identified a large number of hands that you think you will need.
Both Slow Jet and Jet Needle are easy to set up because you can clearly feel the change at the first turn. I feel that the range of setting parts that I have is more important than Mikuni. (Of course, I need Mikuni, too...)
View detail
Fits: Others FCR Carburetor Body Carburetor for ø35-Φ41(Large body)
In fcr mx 37 Setting.
I have several types of fcr mx with different Straight diameter for seasonal setting. fcr has many consumable parts including main nozzle and floating valve, so I replace them regularly. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
Parts to stabilize the pump operation of the FCR Carburetor Body.
Periodic replacement is made to maintain stable acceleration pump operation. View detail
Fits: Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others CR-SPECIAL Carburetor
Used for repair of FCR Carburetor Body
Repair of FCR Carburetor Body with damaged Joint at Hose connection.
Cost performance is good.
View detail
Fits: その他 CR-SPECIAL Carburetor, Others CR-SPECIAL Carburetor
In use at PWK28Carburetor
In Float chamber with PWK28Carburetor
Low-cost Option Parts suitable for gasoline capacity increase
It is
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
FCR Carburetor Body For Small MotorcycleNeedle
Setting parts for FCR Carburetor Body.
Throttle setting in the middle opening range will be affected.
It is good to have several Sizes so you can compare them, but with a 4-cylinder Motorcycle, you have to have 4 of them, which is a bit expensive.
View detail
I need to do something about VTR1000FAfterFire.
I installed it on a VTR1000F European late model.
I wanted to do something about AfterFire after switching to YOSHIMURA's Slip-on Silencer, and also took the time to OH here since I replaced the defective Carburetor with a normal one.
Throw was changed from NORMAL #45 to this #48 for both front and rear, but AfterFire was improved? No change? Changed? I also spent some time on PS adjustment, but it was better than the original? But it was better than the original?
Of course, the goods are good quality with no problems.
OH'd it the most, but Idling also started it up in one shot!
I used to pull chalk in the summer, but that is no longer necessary, and it is stable enough not to stall even at about 800 RPM before it warms up.
Furthermore, there are those who say that FS cannot use 1500 rpm at low speed, but FS can run at 1500 rpm stable and reliable in both early and late periods.
If you can't do it, you must have some problem. (It's an old Motorcycle).
Off topic, but then I changed it further to #50.
View detail
Setting
Purchased for setting of FCR Carburetor Body
It's a pain in the ass, but we have to do it, so we'll replace it.
)
View detail
Fits: その他 CR-SPECIAL Carburetor, Others CR-SPECIAL Carburetor
When the carburetorOH.
[How is it used?
It is a simultaneous replacement with Float chamberO-ring.
How was your experience with it?
Size and quality are both fine.
It fit beautifully without any sagging.
The price of the O-ring system is a little high, but it deteriorates over time, so it is Recommendation to replace the entire system.
View detail
Fits: その他 CR-SPECIAL Carburetor, Others CR-SPECIAL Carburetor
Replaced at the time of carburetor OH
[How is it used?
Bought it when SR's CRcarburetorOH.
How was your experience with it?
Size and quality are both fine.
It fit beautifully without any sagging.
The price is a bit high, but it's a hassle to get a Trouble later on, so I think you should definitely replace it during OH.
View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 CR-SPECIAL Carburetor, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others CR-SPECIAL Carburetor, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
Easy to lose.
I bought this as a spare because it is easy to lose when changing the number of Needle steps. View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, その他 CR-SPECIAL Carburetor, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others CR-SPECIAL Carburetor, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
To the air inlet.
I bought this to seal the air inlet under the Starter B Ranjer. But it may not make much sense ^^^. View detail
In Setting.
A necessity of Setting. If it is a little cheaper, it is good because it becomes a considerable gold amount when it arranges it. View detail
Fits: その他 FCR Single Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Large, Others FCR Carburetor Body Single carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type
Regular replacement parts for FCR Carburetor Body
MaintenanceCycle is important for FCR Carburetor Body unlike Normal cab.
This Rip seal and Rubber parts such as Plunger (Diaphragm) of acceleration pump are regular replacement parts.
As you know, the Throttle valve of the FCR Carburetor Body is equipped with a Roller, which rolls over the rail of the carburetor body. On the other hand, in order to prevent air from being sucked in through the gap between the Throttle valve and the carburetor body due to the negative inlet pressure, the floating Valve + Rip seal is used to keep the Throttle valve from sticking and leaking air so that it can be raised and lowered smoothly.
If the rip seal here loses flexibility or changes shape, the seal between the floating valve and the carburetor body becomes bad and air is sucked in. As a result, there is a malfunction that becomes thin especially near Idling and at AxelOff.
Since it is a cheap thing, I recommend the regular exchange of the Rip seal in the sense that I have a spare!
To replace the rip seal, you need to remove the throttle valve, so you need to do the basic assembly such as clearance and tuning. If you are worried about the precision, please ask PRO. (You don't need to worry about the synchronization in the case of single cylinder such as SR …)
View detail
Same as OEM
I bought this because I was doing an Overhaul on my Carburetor and the Slow Jet was changing shape. This time I bought the same number as OEM, and although I did not feel any change by the exchange, I felt better with the new parts. View detail
Fits: その他 FCR Multi-Carburetor Horizontal (H/Z) Large, その他 FCR Multi-Carburetor Horizontal (H/Z) Small, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Large type, Others FCR Carburetor Body Multi-carburetor Horizontal(H/Z) Small Type
For Air ventPipe
Each Body of FCR Carburetor Body is connected to each other. "Air ventPipe. This is the URing of
Unlike the Fuel Pipe which was sealed with O-ring. URing. Note that it is sealed in
If you don't read the manual properly and place an order, you'll end up with a mysterious surplus of O-rings.
Air ventPipe and Fuel Pipe are relatively frequent replacement parts because they are sometimes broken by age-related deterioration during disassembly.
View detail
Fits: Others FCR Carburetor Body Carburetor for Φ28-Φ33(Small body)
Needle
How many Needle do you buy? I can't seem to get enough of throws, so I'm having trouble with it. So far, this Needle is the best one, so I'd like to see how it goes for a while. View detail
Fits: その他 FCR Carburetor Main Air Jet, その他 CVK Carburetor Main Jet, Others FCR Carburetor Body Carburetor MainAir Jet, Others CVKCarburetor Main jet
If you know how the carburetor is doing, you can use Single Item.
It is a recommendation for when you buy extra parts in fuel kit.
It's a Single Item, so it's a bit pricey, but if you know exactly what the problem is, you can buy just the Jet you want.
View detail